Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹21.8 L
EMD Value
₹27,300
Closing Date
21 Oct 2026, 5:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
General Manager (Civil) Johilla Area
Office of the General Manager (Civil) SECL Johilla Area Nowrozabad Distt Umaria MP 484555
Providing Motor winding section Shed and Transformer and SDL Section Shed at Regional Workshop under AHQ of Johila Area.
2026_SECL_366920_1
SECL/JHL/S.O.(C)/ eNIT-14/26-27/651 dt. 10.10.2026
Open Tender
Civil Works - Others
Percentage
90 days
SECL Johilla Area
3 documents required · 3 mandatory
₹27,300
10 Oct 2026
10 Oct 2026
23 Oct 2026
10 Oct 2026
21 Oct 2026
11 Oct 2026
10 Oct 2026 - 15 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 30 | cum | 227.12 | ₹6,813.6 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 81.41 | cum | 6,598.1 | ₹5,37,151.32 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 27 | cum | 5,320.05 | ₹1,43,641.35 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns | 24.08 | Sqm | 275.69 | ₹6,638.62 |
| 5 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 8,637.55 | kg | 95.33 | ₹8,23,417.64 |
| 6 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 599.04 | kg | 76.65 | ₹45,916.42 |
| 7 | Providing and fixing bolts including nuts and washers complete. | 60 | kg | 116.05 | ₹6,963 |
| 8 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 300 | metre | 116.33 | ₹34,899 |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 315 | sqm | 581.05 | ₹1,83,030.75 |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 243.52 | sqm | 105.6 | ₹25,715.71 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Tendernotice_2.pdf
PDF • 0.70 MB
Tendernotice_3.pdf
PDF • 1.60 MB
BOQ_379867.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .