Repairing/ renovation of IRBN Barrack, Guest House/ Transit Camp at Dam site of Teesta-V Power Station

Amount

Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade i/c brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on old surface.

Providing and painting with plastic Emulsion- paints one or more coats on old surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete.

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Providing and laying in position cement concrete of specified grade including compacting curing etc all complete : 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm & down size) .

Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Supplying, bending and placing in position tor steel reinforcement in all RCC works including cost of binding wires, all complete.

Providing and laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including carriage of bricks up to work site.

Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete:1:4 mix

Providing, fixing and removing form work for casting RCC items as indicated below: with locally available timber Floor slab, roof slab, landing, balcony and access platform

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 75 mm dia. PRINCE / SUPREME soil Pipe.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.1:4 mix

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) ,sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.

Providing and Laying colored glazed tiles of special colour ( black, sorrento, maroon, cotto, kota green, sanddune, fume colour, droplets etc. or equivalent) in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1 cement, 3 coarse sand) finished with flush pointing with white cement slurry

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.

Providing and laying plaster of Paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:

Wall painting with Luxury emulsion Royale shyne Asian paints or equivalent of of equivalent of interior grade in required colour and shade, including applying additional coats wherever required to achieve even shade and colour. Two coats.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes.

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 100 mm dia. PRINCE/SUPREME or equivalent soil pipe.

Providing and Laying white or coloured glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. Size of tiles, 2Ftx2Ft of more

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type)

Providing and fixing anodized aluminium works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / panelling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge

Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. Brass (Chromium plated)

Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.MS 250x16mm Size-Brass (Chromium Plated)

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) STOP COCK 15 MM DIA (CONCEALED WORKS)

Providing and fitting towel ring of chromium plated brass complete with CP brass screw and timber cleats.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) PILLAR COCK 15 MM DIA

Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Orissa pan) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. Orissa Pan 58x44 White CAT NO 20042

Providing and fitting white vitreous china pedestal (European type one piece water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern of the same quality with fittings & brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One piece (Ivory) CAT NO 92008

Providing and fitting Bevelled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to wooden cleats with CP screws, washer etc complete.

Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. 30mm.

GYALDEN THENDUP LEPCHA

KAMALA SHARMA

TSHERING GYATSO LEPCHA