Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹35.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹38.6 L+₹3.4 L (9.82%)Rejected-Finance PATOLI BRAHMANA WARD NO 02 PO MUTHI TEH DISTT JAMMU J K PIN 181205 | JAMMU | JAMMU AND KASHMIR | 181205 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹40.0 L+₹4.9 L (13.9%)Rejected-Finance GURHA BRAHMANA TEH AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L-3 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
IMPROVEMENT / UPGRADATION OF TOILET, BATHROOM SHAFTS AND ALLIED ITEMS IN ZONE B AT DAMANA UNDER GE JAMMU
2023_MES_600485_1
GEJC-29/2023-24
Open Tender
Civil Works
Item Rate
200 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
4 Aug 2023
2 Jun 2023
30 Jun 2023
2 Jun 2023
28 Jun 2023
16 Jun 2023
Amount
Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick surface finished even and smooth without using extra cement etc. all as specified. (Including all necessary scaffolding lifiting arrangement for external surfaces).
Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
Material and labour for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and directed.
Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of wall care putty as on wall complete all as specified and directed.
Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles 250 x 350 / 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material and labour for vitrified tiles dark shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in cement mortar (1:4) complete all as specified and directed.
Supply and fixing machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing machine cut kota stone slab 18-20mm thick over 10 mm thick as in vetical surface over rendering in cement mortar (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Material and labour for granite 20mm thick (Pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and directed.
Dismantling PVC water tank / demolition of RCC water storage tanks of capacity upto 1000 litres and removing from site complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part - I.
Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part - I.
Dismantling boarding any description fixed in any position with nail complete all as specified and directed.
Supply and fixing for 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed/laid/incuding GI framework at ceiling with screws frame work for ceiling with specification as under mentioned: - (i) GI section frame work (Powder coated) suitable for ceiling board, consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed/fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers / suspenders including 4 GI wires with alignment @ 1220mm centre to centre to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm centre to centre in both directions and all suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm But not exceeding 4.0 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed by Engineer-in-Charge.
Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and directed.
Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet and edges will be painted to match with plain sheet, reinforced with mild steel square tube, supplying and fixing in opening as per specification complete all as specified and directed.
Supply and fixing 30 mm thick PVC plain colour factory made panel door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rail, Mild steel frame shall be covered with heat moulded plain colour PVC channel and 5 mm thick X 15 mm wide PVC sheet beading used inside style and rails and decorative PVC beading of 10x10 mm used instead of exposed portion of PVC sheet beading as in toilet / kitchen cabinet shutters complete all as specified and directed.
Supply and fixing 30mm thick flush shutters, soild core construction, with particle board core and plywood face panels, commercial type on both faces complete all as specified and directed.
Supply and fixing second class hard wood, glazed and skeleton shutter 35mm thick open, rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I section 8.24 (b) supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing mild steel butt hinges medium weight 75mm size complete all as specified and directed.
Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and directed.
Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixing in repairs Aluminium anodized, barrel tower bolt of extruded section, 150mm long complete all as specified and directed.
Supply and fixing in repairs Aluminium anodized, barrel tower bolt of extruded section, 200mm long complete all as specified and directed.
Supply and fixing in repairs Aluminium handle, cast type, anodized, 150mm size complete all as specified and directed.
Supply and fixing Aluminium door stopper exceeding 100mm long for doors complete all as specified and directed.
Supply and fixing in repairs Helical door spring of size 300 mm including welding to steel chowkhats complete all as specified and as directed at site.
Supply and fixing in repair galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.
Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
Hacking out old broken glass of any thickness, size, quality or description from the wooden frames glazing with putty or fixed with wooden beads complete all as specified and directed.
Supply and fixing figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane of thickness 3mm complete all as specified and directed.
Material and labour for second class hard wood clean swan timber as in framed work, for cupbaord etc fixed in repairs scantling including cutting, drilling, fixing with nails, screws etc complete all as specified and directed.
Supply and fixing in repair prelaminated particle board 18/19 mm thick, interior grade prelaminated one side with decorative choice lamination fixed with screws to timber frame work fixed complete all as specified and directed.
Supply and fixing in repair hasp and staple 150mm long safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws fixed complete all as specified and directed.
Supply and fixing continuous piano hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm (when open) fixed with welding complete all as specified and directed.
Supply and fixing in repairs Aluminium handle, cast type, anodized, 100mm size complete all as specified and directed.
Supply and fixing 40mm dia, cupboard knobs fixed with nut, screws and washer of mild steel, bright finished complete all as specified and directed.
Supply and fixing pre-painted (factory painted) box type mild steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter fixed with galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including necessary GI wire staples etc on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and as directed and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3. Notes: - The quoted rates shall also include: - (i) Two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. Colour / shade will be approved by Engineer-in-Charge. (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) 10 mm Square Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs complete. (v) Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.
Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed.
Material and labour for cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in pressed steel chowkhats, bed block for holdfast and the like complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge.
Material and labour for PCC (1:2:4) type B-0 (using 12.5mm thick graded crushed stone aggregate) mixed with liquid water proofing compound and laid on RCC sunken slab as base layer for receiving top layer complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid water proofing compound complete all as specified and directed.
Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall with clamps complete all as specified and directed.
Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall with clamps complete all as specified and directed.
Supply and fixing in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.
Supply and fixing in repairs PVC (SWR) bends of bore 75 mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) floor trap 75mm with grating including jointing to pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Vitreous china squatting pan 'Orissa' pattern' size 580 x 440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair vitreous china wash hand basin white flat back end of size 550 x 400mm including brackets, cutting for and pinning in ends for brackets erecting stand complete including brass chromium plated waste coupling and PVC 32mm bore waste pipe with chain and plug and porcelain stopper complete all as specified and directed.
Supply and fixing in repair vitreous china wash hand basin oval type exceeding 600mm dia fixing in platform slab erecting stand complete including brass chromium plated waste coupling and PVC 32mm bore waste pipe with chain and plug and porcelain stopper complete all as specified and directed.
Supply and fixing sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers or waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 100mm including waste pipe etc complete all as specified and directed.
Supply and fixing sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including waste coupling and waste pipe etc complete all as specified and directed.
Supply and fixing in repairs stainless steel plate rack made out of 1mm thick sheet of size 750 x 600 x 250mm of size having partition and fixed with steel fasteners or steel screwed complete all as specified and as directed.
Supply and fixing in repair toilet paper holder box type complete all as specified and as directed.
Taking up or down steel tubing 15mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and directed.
Taking up or down steel tubing 20mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and directed.
Supply and fixing 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
Description all as per Ser item No. 69.00 here-in-before but except tubing complete all as specified and directed.
Supply and fixing in repair GI tubing 20 mm bore medium grade including all necessary fittings laid in floors or fixed in walls or ceilings complete all as specified and directed.
Supply and fixing in repair hand shower (Health Faucet) (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repairs corner glass shelf minimum 200 mm radius with bracket complete all as specified and directed.
Supply and fixing in repairs gate valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 20 mm dia bore including necessary fittings complete all as specified and directed.
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm bore fixed in repair minimum weight 210 grams complete all as specified and directed.
Supply and fixing in repair curtain rods, mild steel, chromium plated with fixing brackets, stops, side funnels etc complete with all fittings all as specified and directed.
Supply and fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore fixed in repair minimum weight 210 grams complete all as specified and directed.
Supply and fixing in repairs bib taps, cast copper alloy fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and directed.
Supply and fixing in repairs chromium plated angular stop cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and directed.
Supply and fixing 15 mm dia bore in repairs brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply and fixing 15 mm dia bore in repairs brass chromium plated wall mixer with 'L' bends suitable for connecting to shower pipe for mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed.
Supply and fixing 15 mm dia bore in repairs brass chromium plated wash hand basin / sink mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of size 15mm dia bore complete all as specified and directed.
Supply and fixing in repair waste coupling / fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified and directed.
Supply and fixing in repair looking mirror of size 600mm x 450mm with PVC moulded frame and hard board back white colour complete all as specified and directed.
Supply and fixing in repair PVC connection 15mm bore and 450 mm long with brass or PVC nuts and PVC washer complete all as specified and directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and directed.
Cleaning of water storage tank completely by removing all scale dirt / dust of any description including disconnecting tank and refixing in position after cleaning complete all as specified and as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity exceeding 250 litres and not exceeding.500 litres including dismantling and refixing if required complete all as specified and directed.
Cleaning of water storage tank completely by removing all scale dirt / dust of any description including disconnecting tank and refixing in position after cleaning complete all as specified and as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity 1000 litres including dismantling and refixing if required complete all as specified and directed.
Supply and fixing in repair PVC flushing cistern 10 litre capacity make should be engraved on the body including flushing pipe chormium plated 90 cm long, pair of bracket etc complete all as specified and directed.
Supply and fixing in repairs tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass chromium plated complete all as specified and directed.
Supply and fixing in repairs brass chromium plated shower rose with arm not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and directed.
Supply and fixing in repair 125 mm dia steel grating fixed in position complete all as specified and directed.
Supply and fixing in repair 125 mm dia steel grating with hole fixed in position complete all as specified and directed.
Material and labour for cement concrete (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS : 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.
Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) as in copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and directed.
Material and labour for chequered cement concrete coloured tiles 30cm x 30cm x 25 mm thick, polymer moulded set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including screed bed and bedding layer of mortar 20mm thick in cement plaster (1:6) for laying floor finishes.as per design/pattern approved by Engineer-in-Charge complete all as specified and directed.
Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of oil bound distemper including wall putty on wall complete all as specified and directed.
Material and labour for complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, mould, moss and efflorscent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc, applying two coats of weather proof paint exterior grade over one coat of primer on walls, making good the depression etc with wall putty surface even and smooth including all scaffolding arrangement upto four storeyed building complete all as specified and directed.
Material and labour for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old wooden surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and directed.
Material and labour for cutting and derooting of tree, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and making good with PCC (1:2:4) not exceeding 0.5 Sqm area including finsihing the surface to match the existing shade necessary scaffloding upto three storey building complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.
Description all as per Ser item No 111.00 here-in-before but except bricks complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Material and labour for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in cement mortar (1:6) complete all as specified and directed.
Material and labour mild steel TMT 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
M/S VERMA ENTERPRISES
bushan kumar
Bidder Name
M/S VERMA ENTERPRISES
M/S ELECTROMATICS
bushan kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .