Work contract for AOH of various auxiliaries of Turbine of 210MW Unit ATPS MPPGCL Chachai

Section -I

Cleaning work of various Strainers, Tanks & Heat Exchangers

Cleaning of strainers

BFP suction strainer

ACW Self cleaning strainer

CEP suction strainers

COLTCS Sieve

Cleaning of Tank

Deaerator & Feed Storage Tank of Deaerator

Condensate storage tank

BCW make-up water tank

Hotwell cleaning

Condensate surge tank

Service water tank

Potable water tank

D.M. Storage tank

Intermediate D.M. storage tank

Ultrafiltration D.M. storage Tank

Drain Oil Tank & Clean Oil Tank

Cleaning of Coolers and heat exchangers

BFP lube oil cooler

BFP working oil cooler

Cleaning of plate type heat exchanger

Corrugated SS plate type heat exchanger

Cleaning of under ground storage tanks

Clarified water storage tank (UG) in PTP

Filtered water storage tank (UG) in PTP

CW sump

CW fore bay

Cold water basin

Section- II

Overhauling / major work of Pumps

Major works/Overhauling of Pumps

Condensate Extraction Pump (Model: EN5J40)

Cooling Water Pump (Model: CW01Q)

Rubbing, priming with red oxide primer, painting enamel grey paint & rubber paint of all internal components with 2 coating of CEP Pump

ACW Pump

BCW Pump

Overhauling of Booster Pump FA1B56

Replacement of BFP FK6D30 discharge cover O-Ring

Alignment, oil & gland replacement work of Pumps

Alignment work of various pumps

Alignment of BCW Pump

Alignment of ACW Pump

Alignment, oil & gland replacement of CEP

Alignment, oil & gland replacement of CW Pump

Section III

Overhauling/Repairing of LP & HP heaters

Overhauling/Rectification of issues in HP/LP Heaters

Overhauling of LP heaters

Through inspection, coils/tube replacement, leakages attending through maintenance of parting plain, parting plate, manway cover of HP heaters

Section- IV

Door seal replecement

Repair/replacement of Door Seals

Repairing/ replacement of door seals 600/700/1600 NB butterfly valves

Section V

Overhauling /Repair/Replacement/Servicing of various valves & pipelines in TG House

High Pressure Valves (Press. Above 50 Kg/ Sq. Cm)

Size 300 mm & above

Size 200mm & above but less than 300 mm

Size 100 mm & above but less than 200 mm

Size 50 mm & above but less than 100 mm

Size below50 mm

Medium Pressure Valves (Press. In between 10-50 Kg/ Sq. Cm)

Size 300 mm & above

Size 200mm & above but less than 300 mm

Size 100 mm & above but less than 200 mm

Size 50 mm & above but less than 100 mm

Low Pressure Valves (Press. Below 10 Kg/ Sq. Cm)

Size 350 mm & above

Size 200mm & above but less than 300 mm

Size 150 mm & above but less than 200 mm

Size 50 mm & above but less than 100 mm

Size below50 mm

Replacement of Gland Packing of Medium & High Pressure Valves (Pressure above 10 Kg/Sq.Cm)

Size upto 50 mm

Size 50 mm & above but less than 100 mm

Size 100 mm & above but less than 200 mm

Size above 200 mm

Section VI

Welding Work of Valves, flanges & pipelines & bends

High Pressure welding work regarding valves, flanges and pipelines & bends of following sizes

Replacement/Laying of pipelines of various sizes

Line Size 80mm

Line Size 100mm

Please Enable Macros to View BoQ information

ANNEXURE-XIV

M.P. Power Generation Company Limited (MPPGCL)

ATPS MPPGCL Chachai

“TECHNICAL BID- Works/Services Tender”

MPPGCL/TENDER No.- 2025_MPPGC_462775

All the documentry evidences should be enclosed alongwith this questionnaire

PART ‘A’ GENERAL INFORMATION

ii) Write ‘Yes’ or ‘No’ wherever applicable

PART 'B' : COMMERCIAL INFORMATION

If Yes, BG No. and amount and name of issuing bank

b) The quoted price are firm for part order also

a) To be paid by MPPGCL

b) Not applicable

c) If not applicable presently, and if become applicable during execution of the contract, then same shall be borne by you.

d) Exempted

a) To be paid by MPPGCL

b) Not applicable

c) If not applicable presently, and if become applicable during execution of the contract, then same shall be borne by you.

d) Exempted

a) To be paid by MPPGCL

b) Not applicable

c) If not applicable presently, and if become applicable during execution of the contract, then same shall be borne by you.

d) Exempted

GST No. of MPPGCL 23AADCM4472A1ZZ

Indicate GST Registaration Number & place of registration (Please note that case of non-registration with GST Department, GST as admissible shall be deducted by the purchaser from the bills of service provider)

Any other tax applicable

Please confirm that benefit of input tax credit has been passed on while quoting the rates.

Whether quoted for all the work/services as per tender specifications.

Whether Tenderer is agreeable to payment clause as per tender specification (if no, Please give details)

Whether accepted the scope of works/services as detailed in the tender specification.

If no please give details

Whether agreeable for period of commencement and completion of work as per terms and conditions of specification.

The date of order shall be the base date for counting the contract period.

If no please give details

Whether tenderer is agreeable to penalty clause as per tender specification, (if No,Please give details)

If no please give details

Whether Tenderer is agreeable to furnish Requisite Security Deposit as per tender specification.

If no please give details

Whether Tenderer is agreeable to guarantee Clause as per tender specification.

If no please give details

Whether copies of P&L Account/Balance sheet f or last 03 years enclosed.

Whether ready for the extension of contract for the further period as per tender specifications.

Whether tenderer is agreeable to clause of variation of scope of works/services.

Whether tenderer is agreeable for execution of contract Agreement after placement of order.

Whether the tenderer is agreeable to start the work at a short notice of 24 hrs.

Whether experience record enclosed.

Whether list of technically qualified Personnel enclosed.

Whether copy of labour license/electrical license (if any) enclosed.

Whether labour will be insured by L.I.C. or any other similar agency.

Whether tenderer is agreeable for deduction of income tax/any other tax duty imposed by the Govt.

Whether banker's certificate regarding financial status enclosed.

Whether all clauses/conditions/terms/schedules have been read carefully and taken care of while preparing bid.

Whether agreeable to all the other terms & conditions of tender specification.

if No, then give details

Name, address & telephone No. of your local Representative (if any)

Note :- Please upload scanned copies of requisite documents alogwith the questionnaire.

M.P. Power Generation Company Limited (MPPGCL)

ATPS MPPGCL Chachai

“TECHNICAL BID- Works/Services Tender”

TENDER No. (2025_MPPGC_462775)

SCHEDULE-A

Sub : Schedule of Commercial Deviations.

The following are commercial deviation and variations from and exception to the tender specifications. These Deviations and variation are exhaustive. Except these deviations, the entire order shall be executed as per your tender specifications and documents, we agree that any condition, variation, deviation etc., If found elsewhere in the proposal, apart from relating to any rebates offered shall not be given effect to.

Bidder’s Name & Address :-

Any Commercial Deviation (if YES, filled details)

Security Clause

Penalty Clause

Validity Clause

Payment Clause

Period of Work

Base date of order

Any Other Deviation

Except for aforesaid deviations, the entire order, if placed on us, shall be executed in accordance with your tender specification and any other conditions, variation/deviation etc., if found elsewhere, in our offer should not be given any considerations while finalizing the tender. Note : 1- Any Deviation in payment , Penalty and guaranty clause may make your offer liable for rejection without any futher correspondence in this regard.

SCHEDULE - B

Sub : Schedule of Technical Deviations.

The following are technical deviation and variations from and exception to the tender specifications. These Deviations and variation are exhaustive .Except these deviation, the entire order shall be executed as per your tender specifications and documents. We agree that any condition, variation, deviation etc., If found elsewhere in the proposal, apart from relating to any rebates offered shall not be given effect to.

Any Technical Deviation (if YES,fill details)

. Note : 1-Any Technical Deviation may make your offer liable for rejection without any futher correspondence in this regard.