REPAIR REPLACEMENT OF CHAIN LINK FENCING APPROX 1200 M AND CONCERTINA COIL APPROX 150 M AROUND NEW AMN DUMP AT GMS UNDER GE I GOS

Amount

Dismantling posts/pillers or struts (Wood, Steel, or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mash any type

Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

M & L, cement concrete 1 : 4 : 8 type D2 (40 mm graded aggregate) as in fdn, filling and mass concrete, complete all as specified and directed.

Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm, not exc 250Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

M&L, MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing (FE-410W Gde E-250) complete all as specified and directed.

M&L, MS TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing post complete all as specified and directed.

M&L, TMT MS bars 6 to 8 mm dia and over upto and including 10mm dia as in stirrups, spacers/ binders, etc., cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F PVC coated chain link fencing 100 x 100 mm mesh size made out of GI wire from 2.5 to 2.85 mm dia having minimum 1mm thick PVC coating over it including inner woven wire.Weight of wire mess not exc 4kg/sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standars, rails, straining bolts etc including provision of building wire complete all as specified and directed.

S&F mild steel flat iron fillets for securing wire mesh etc., incl. all necessary drilling or riveting, etc., and smilar work conforming to Fe 290 gde E-165 complete all as specified and directed.

S&F 12mm dia of mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagoanl or sqare nut, nexc 15cm long complete all as specified and directed.

S&F 2 strand barbed wire galvanised, 2.24mm dia barbed 2.00mm dia barbed at 75mm spacing and straing and fixing to any type of standared rails staining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, stables or steel pins,etc complete all as specified and directed.

M&L 2 coats of aluminum painting over coat of red oxide inc chrome primer incl. prepartion of new steel surfaces of any description, nexc 10 cm in width or girth.

M&L preparation of surfaces and applying two coats of cement base paint on fencing post, complete all as specified and directed.

Exvating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundations etc and getting out in hard dense soil.

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar complete all as specified and directed.

Providing cement concrete type C1 1:3:6 using 20 mm graded aggregate as in coping incl weathering, slightly rounded or chamfered angle and throating complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth without using extra cement complete all as specified and directed.

Painting to steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of Red oxide or Zinc chrome incl preparation of surfaces complete all as specified and directed.

S&Ffor angle iron posts, struts in fencing including cutting tops, to shape as required, drilling holes, notching for wire etc, confirming to Fe-290 Gde, E-165 complete all as specified and directed.

M&L for Providing and fixing concentina coil fencing with puch tape concentina coil 600mm dia having 10 round/RM up to 3 mtr height of wall with angle iron 'Y' shape, complete all as specified and directed.

S J ENTERPRISES

M/s J. P. ASSOCIATES

M/s M M Engineering Systems

M/s Bapujee Builders and Traders

M/s MAA BHAIRABI ENTERPRISES

M/s Ats Electricals

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS