Restoration of Damaged Underground Outlet at RD 2787mRight side of Kandi Canal Stage 2 Hoshiarpur

Amount

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except rocky

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete. C.I Single air valve screwed (Size 50mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m.

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. Capacity of Air compressor 300 cfm at 250 PSI

Providing, Laying , fixing & jointing of 225 mm U.P.V.C. socketed (2.5 kg pressure) Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Laying , fixing & jointing of 250 mm U.P.V.C. socketed (2.5 kg pressure) Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge

Providing, Laying , fixing & jointing of 280 mm U.P.V.C. socketed (2.5 kg pressure) Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing and fixing ISI Marked 225 mm dia Alfa Valve

Providing and fixing ISI Marked 250 mm dia Alfa Valve

Providing and fixing ISI Marked 280 mm dia Alfa Valve

providing and fixing 225 mm Long bend (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 250 mm Long bend (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 280 mm Long bend (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 225 mm Long bend (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 280 mm Socket (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 225 mm Equal- T (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 250 mm Equal- T (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Brick Work First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING 12.5 mm thick cement plaster 1:4

Providing and fixing ISI Marked 300 mm dia Alfa Valve

Providing, Laying , fixing & jointing of 300 mm U.P.V.C. socketed (2.5 kg pressure) Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

Providing and fixing 300 mm Long bend (6kg/cm2 pressure) conforming to IS codes with latest amendment's if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 300 mm Socket (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 280 mm Equal- T (6kg/cm2 pressure) conforming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 300 mm Equal- T (6kg/cm2 pressure) conforming to IS codes with latest amendment's if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Providing and fixing 250 mm Socket (6kg/cm2 pressure) conferming to IS codes with latest ammendments if any of site if work including loading, in-loading and re- handling if any complete in all respects as per design and PWD specifications and instructions of engineer in charge

Any other item

The Lambra Co Operative L and C Society Ltd