Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.6 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹3.9 L+₹1.2 L (47.1%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹3.9 L+₹1.3 L (48.5%)Admitted-Finance | L3 | Admitted-Finance |
Tender Value
₹3.9 L
EMD Value
₹7,760
Closing Date
18 Aug 2026, 6:00 pmClosed
XEN OFFICE REW JAMMU
XEN OFFICE REW JAMMU
Construction of boundary wall and Installation of Gate and allied works near Shiv Mandir adjoing Block HQ, Arnia UNDER BDC FOR THE YEAR 2026-27
2026_RDPR_319393_2
e-NIT No. 370 REWJ of 2026-27 dated 05-08-2026
Open Tender
Civil Works
Percentage
120 days
XEN OFFICE REW JAMMU
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
MH0515
₹7,760
2 Sept 2026
5 Aug 2026
19 Aug 2026
5 Aug 2026
18 Aug 2026
5 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mech means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kind of Soil 25 meter beyond 1 m from cutting edge | 13.13 | Cum | 256.85 | ₹3,372.44 |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | 2.12 | Cum | 4,826.5 | ₹10,232.18 |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 4.93 | Cum | 5,733.6 | ₹28,266.65 |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | 2.81 | Cum | 7,788.4 | ₹21,885.4 |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including all leads, lift and carriage complete | 197.03 | kg | 123.2 | ₹24,274.1 |
| 6 | 12 mm thick cement plaster of 1 cement: 4 fine sand mix. | 11.62 | sqm | 260.05 | ₹3,021.78 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form
for:Foundations, footings, bases of columns etc. | 26.77 | Sqm | 286.35 | ₹7,665.59 |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 10.16.1 Hot finished welded type tubes | 1,250 | Kg | 156.95 | ₹1,96,187.5 |
| 9 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 10.2.2 Welded | 14.13 | Kg | 138.2 | ₹1,952.77 |
| 10 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters
and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 | 100 | Sqm | 706.5 | ₹70,650 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.29 MB
BOQ_1058714.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .