Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.6 Cr
EMD Value
₹5.1 L
Closing Date
4 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Railway track work including track maintenance work.
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
SC-MUE section: Safety Related track Maintenance works under ADEN/NZB Sub divisional Jurisdiction for a period of 01 Year (12 Months)
124_DRM_W_HYB_26~SCR
124_DRM_W_HYB_26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹5.1 L
9 Nov 2026
9 Nov 2026
20 Nov 2026
85 items across 2 schedules · ₹2,61,20,679.09 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Girth over 30 cm and up to 60 cm | Each | 100.00 | 303.04 | 30,304 |
| 2 | Girth over 60 cm and up to 1.5m | Each | 100.00 | 836.48 | 83,648 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 150.00 | 32.53 | 4,879.5 |
| 4 | Locations other than Ballasted Deck Bridge | Each | 100.00 | 407.84 | 40,784 |
| 5 | For 1.00m long fishplates | Joint | 160.00 | 112.94 | 18,070.4 |
| 6 | For 610 mm long fish plates. | Joint | 20.00 | 79.49 | 1,589.8 |
| 7 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 150.00 | 45.12 | 6,768 |
| 8 | Lubrication of Elastic Rail Clips on PSC sleepers as per procedure prescribed in latest edition of IRPWM with Railway's grease. | ERC | 90000.00 | 1.95 | 1,75,500 |
| 9 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 12000.00 | 44.66 | 5,35,920 |
| 10 | By using Railway's Grease graphite | Each | 1600.00 | 26.99 | 43,184 |
| 11 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the s c r e w w i t h specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 1000.00 | 250.56 | 2,50,560 |
| 12 | Sleepers up to 2.85 m length | Each | 60.00 | 524.03 | 31,441.8 |
| 13 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 60.00 | 721.59 | 43,295.4 |
| 14 | Sleepers of more than 4.20 m length | Each | 50.00 | 1,136.71 | 56,835.5 |
| 15 | 1 in 8½ Turnout | Set | 10.00 | 3,306.98 | 33,069.8 |
| 16 | 1 in 12 Turnout | Set | 40.00 | 3,618.15 | 1,44,726 |
| 17 | 1 in 16 Turnout | Set | 3.00 | 3,929.32 | 11,787.96 |
| 18 | 1 in 8½ Switch Assembly | Set | 6.00 | 11,659.06 | 69,954.36 |
| 19 | 1 in 12 Switch Assembly | Set | 10.00 | 12,977.73 | 1,29,777.3 |
| 20 | 1 in 8.5 Turnouts | Set | 8.00 | 2,556.3 | 20,450.4 |
| 21 | 1 in 12 Turnout | Set | 16.00 | 4,119.29 | 65,908.64 |
| 22 | 1 in 16 Turnout | Set | 2.00 | 4,453.77 | 8,907.54 |
| 23 | For 1 in 12 Turnouts | Set | 20.00 | 6,457.78 | 1,29,155.6 |
| 24 | For 1 in 8.5 Turnouts | Set | 10.00 | 5,166.22 | 51,662.2 |
| 25 | For 1 in 16 Turnouts | Set | 2.00 | 7,749.33 | 15,498.66 |
| 26 | For 1 in 12 Turnouts (Sleeper No 1 to 25 and 5 approach sleepers) | Set | 25.00 | 1,543.31 | 38,582.75 |
| 27 | For 1 in 8.5 Turnouts & Derailing switches (Sleeper No 1 to 22 and 5 approach sleepers) | Set | 11.00 | 1,234.65 | 13,581.15 |
| 28 | For 1 in 16 Turnouts (Sleeper No 1 to 31and 5 approach sleepers) | Set | 3.00 | 1,851.97 | 5,555.91 |
| 29 | For 1 in 12 Turnouts (Sleeper No 65 to 73 ) | Set | 25.00 | 1,148.17 | 28,704.25 |
| 30 | For 1 in 8.5 Turnouts (Sleeper No 43 to 48) | Set | 13.00 | 918.54 | 11,941.02 |
| 31 | For 1 in 16 Turnouts (Sleeper No 77 to 86) | Set | 3.00 | 1,377.81 | 4,133.43 |
| 32 | Renewal of corroded slide chairs duly removing the old slide chairs by heating using contractors gas and equipments or by any approved methods and inserting Railways new slide chairs and plate screws including crossing of tracks, leading all required materials to site, stacking all released materials, with all contractor's tools, consumables, labour, lead, lift and incidental charges etc complete as directed by the Engineer in charge. Note: 1. All the fittings will be supplied at nearest SSE/Stores. 2. In case of damage of PSC sleeper, penalty at the rate of 25% of the current cost of sleeper shall be levied. | Each | 130.00 | 302.15 | 39,279.5 |
| 33 | Turnout sleepers of length up to 2.85 m | Each | 130.00 | 118.86 | 15,451.8 |
| 34 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 130.00 | 142.63 | 18,541.9 |
| 35 | Sleepers of length more than 4.20 m | Each | 100.00 | 154.52 | 15,452 |
| 36 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 90000.00 | 22.66 | 20,39,400 |
| 37 | Under Traffic Block Conditions: | cum | 10000.00 | 45.35 | 4,53,500 |
| 38 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in- Charge after release from track. | Each | 200.00 | 1,443.86 | 2,88,772 |
| 39 | For PSC Sleeper | TRM | 72000.00 | 77.12 | 55,52,640 |
| 40 | Packing of isolated loose PSC sleepers on plain track below the bottom of the sleepers and surrounding through out its length duly opening two galas on either side of the renewed sleepers and packing the sleeper to bring the track to normal speed including gauging, aligning, squaring of sleepers and sectioning of ballast to the required profile with all contractor's labour, tools and plant etc. including all lead and lift and crossing of tracks where ever necessary complete and as directed by the Engineer-in-charge. | Sleeper | 10000.00 | 69.89 | 6,98,900 |
| 41 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 1300.00 | 153.29 | 1,99,277 |
| 42 | With Clamps | Set | 150.00 | 135.75 | 20,362.5 |
| 43 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 65.00 | 1,567.39 | 1,01,880.35 |
| 44 | With Contractor's hard wood block. | Each | 70.00 | 2,239.07 | 1,56,734.9 |
| 45 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in- charge to keep drains clean and clear in cuttings etc. | RM | 21000.00 | 27.86 | 5,85,060 |
| 46 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 25000.00 | 12.82 | 3,20,500 |
| 47 | Kilometre & Gradient post | Each | 150.00 | 85.27 | 12,790.5 |
| 48 | Hectometre Post | Each | 20.00 | 97.98 | 1,959.6 |
| 49 | Level Crossing Post | Each | 40.00 | 169.17 | 6,766.8 |
| 50 | Curve Post | Each | 120.00 | 90.22 | 10,826.4 |
| 51 | Bridge Board | Each | 150.00 | 150.25 | 22,537.5 |
| 52 | Bridge Tablet | Each | 100.00 | 42.99 | 4,299 |
| 53 | Miscellaneous General Boards, Jurisdiction Boards, Structures etc. | Sqm | 70.00 | 116.55 | 8,158.5 |
| 54 | For day time block working | TRM | 50000.00 | 16.42 | 8,21,000 |
| 55 | For night time block working | TRM | 9000.00 | 18.4 | 1,65,600 |
| 56 | Removing and refixing of guard Rails over slab bridges during machine packing with all contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by Engineer In charge. | TRM | 150.00 | 91.01 | 13,651.5 |
| 57 | 1 in 8½ Turnouts (Under Traffic Block Conditions) | Set | 16.00 | 8,057.73 | 1,28,923.68 |
| 58 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 50.00 | 9,376.4 | 4,68,820 |
| 59 | 1 in 16 Turnouts (Under Traffic Block Conditions) | Set | 2.00 | 12,188.88 | 24,377.76 |
| 60 | BCM/FRM/UNIMAT (7.5 KVA generator and 12x500 W) | Night | 180.00 | 3,524.13 | 6,34,343.4 |
| 61 | 60 Kg - 110/90 UTS - On Running Line | Each | 400.00 | 270.31 | 1,08,124 |
| 62 | 52 Kg - 90 UTS- On Running Line | Each | 80.00 | 219.15 | 17,532 |
| 63 | Outside Track | Each | 800.00 | 50.55 | 40,440 |
| 64 | Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | Each | 1700.00 | 61.17 | 1,03,989 |
| 65 | Level crossings with asphalted road surface | Sqm | 250.00 | 491.79 | 1,22,947.5 |
| 66 | Level crossings with any other type of road surface | Sqm | 195.00 | 402.22 | 78,432.9 |
| 67 | Fixing check rails to running rails on level crossings with MS brackets, MS packing plates, bolts & nuts, spring washers etc. including lubrication as per approved drawing & specifications, as directed. Rails, MS brackets, packing plates, bolts & nuts, spring washers will be supplied by Railways. Note: One set consists two check Rails. | Set | 13.00 | 4,341.61 | 56,440.93 |
| 68 | Clearing waterway of major & minor bridges by removing weeds / shrubs / bushes, removing silt deposit, filling scours, if any up to 10 metre from centre of bridge on either side including disposing waste and silt away from waterway. Note: Rate is for a single line and per metre of bridge span. | Metre | 2000.00 | 184.57 | 3,69,140 |
| 69 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 40.00 | 6,231.22 | 2,49,248.8 |
| 70 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 40.00 | 5,388.98 | 2,15,559.2 |
| 71 | Stop Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 40.00 | 6,231.22 | 2,49,248.8 |
| 72 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each | 40.00 | 7,524.7 | 3,00,988 |
| 73 | Manufacturing, supplying and fixing Curve Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately) | Each | 180.00 | 1,056 | 1,90,080 |
| 74 | For erection | Each | 180.00 | 220.96 | 39,772.8 |
| 75 | For removal | Each | 140.00 | 179.15 | 25,081 |
| 76 | Fixing vertically the unserviceable PSC sleepers at locations of tress-passing, railway boundary or to make temporary store by excavating trench, fixing PSC sleeper in trench and filling back open trench. | Each | 1000.00 | 129.83 | 1,29,830 |
| 77 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each | 100.00 | 3,471.5 | 3,47,150 |
| 78 | Supplying and spraying in specified proportion Weedicide Chemical, capable to kill entire weed on track / cess / embankment with all labour, material, tools & plants etc. complete job in all respect. Scientific name of the chemical is Isopropylamine Salt of Glyphosate, in which active ingredient is Glyphosate (41%), colour is light amber to brownish, very low in toxicity and has favourable environmental characteristics. It will be ensured that no weed growth occurs up to six months period, otherwise re- spraying shall be done by the contractor free of cost. | Sqm | 250000.00 | 0.58 | 1,45,000 |
| 79 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 4300.00 | 870.14 | 37,41,602 |
| 80 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 500.00 | 836.21 | 4,18,105 |
| 81 | Tractor with Trolley for local transportation or other misc. works. | Hour | 500.00 | 200.69 | 1,00,345 |
| Schedule total | ₹2,19,85,040.89 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
SFMS.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
SPLCONDITIONSFORSAFETYRELATEDWORKS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .