Development of Balu Ghat-1 at Sultanganj, Bihar

Summary of Estimated Cost (BOQ)

S. No. Particulars DSR (2018) with applicable cost

Construction Of New Ghat & Steps including

Railing and saftey Chain

2 Amenities 4,911,557.64 -

3 Promenade including Green Area 17,422,632.06 854,817.85

4 Pathway (Road) 511,730.00 -

5 Bank Protection - 2,549,669.20

6 Signages - 191,955.18

Grand Total 57,369,352.00

Grand Total 57,369,352.00

Digitally signed by

NBCC (INDIA) LTD. PRIYA CONTRACTOR

KUMARI 17:45:04 IST

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

1.0 EARTH WORK

Earth work in rough excavation, banking excavated earth in

layers not exceeding 20 cm in depth, breaking clods,

watering, rolling each layer with ½ tonne roller or wooden

or steel rammers, and rolling every 3rd and top-most layer

with power roller of minimum 8 tonnes and dressing up in

embankments for roads, flood banks, marginal banks and

guide banks or filling up ground depressions, lead upto 50

m and lift upto 1.5 m :

2.2.1 All kinds of soil Cum 9.50 844.78 8,025.41 -

Earth work in excavation by mechanical means (Hydraulic

excavator)/ manual means over areas (exceeding 30cm in

1.2 2.6 depth. 1.5m in width as well as 10 sqm on plan) including - - -

disposal of excavated earth, lead upto 50m and lift upto

1.5m, disposed earth to be levelled and neatly dressed.

Earth work in excavation by mechanical means (Hydraulic

Excavator )/ manual means in foundation trenches or

drains (not exceeding 1.5 m in width or 10 sqm on plan)

1.3 2.8 including dressing of sides and ramming of bottoms, lift - - -

upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead

2.8.1 All kinds of soil. cum - 285.40 - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Filling available excavated earth (excluding rock) in layers

not exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

Supplying and filling in plinth with Jamuna sand under

1.5 2.27 floors, including watering, ramming, consolidating and cum 78.97 2,209.29 174,464.88

dressing complete. -

1.6 16.3 Supplying and stacking at site. - - - -

2.0 CONCRETE WORK - - - -

Providing and laying in position cement concrete of

4.1 specified grade excluding the cost of centring and - - -

shuttering - All work upto plinth level : -

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded

stone aggregate 40 mm nominal size). -

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate

40 mm nominal size) -

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate

40 mm nominal size). -

3.0 REINFORCED CEMENT CONCRETE - - - -

Centring and shuttering including strutting, propping etc.

and removal of form for : -

Lintels, beams, plinth beams, girders, bressumers and

cantilevers. -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc. -

5.9.16 Edges of slabs and breaks in floors and walls - - - -

Reinforcement for R.C.C. work including straightening,

3.3 5.22 cutting, bending, placing in position and binding all - - -

5.22.6 Thermo-Mechanically Treated bars. kg 60,949.26 94.46 5,756,974.45 -

Providing and laying in position machine batched and

machine mixed design mix M-25 grade cement concrete for

reinforced cement concrete work, using cement content as

per approved design mix, including pumping of concrete to

site of laying but excluding the cost of centering,

shuttering,finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to

accelerate, retard setting of concrete, improve workability

without impairing strength and durability as per direction

of Engineer-in-charge. -

(Note :- Cement content considered in this item is @ 330

kg/cum. Excess/less cement used as per design mix is - - -

payable/recoverable separately -

3.4 5.33.1 All works upto plinth level cum 438.87 9,046.55 3,970,280.97 -

3.5 5.33.2 All works above plinth level upto floor V level cum 9.50 10,634.24 101,025.29 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

3.6 5.34 Extra for providing richer mixes at all floor levels. - - - -

Note:- Excess/less cement over the specified cement

content used is payable /recoverable separately. -

Providing M-35 grade concrete instead of M-25 grade BMC

/RMC. (Note:- Cement content considered in M-30 is @ 340

Add for using extra cement in the items of design mix over and

above the specified cement content therein. -

4.0 BRICK WORK - - - -

Brick work with F.P.S. bricks of class designation 75 in

foundation and plinth in: -

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 9.50 6,965.31 66,170.42 -

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level

in all shapes and sizes in : -

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 9.50 8,586.32 81,570.01 -

Half brick masonry with common burnt clay F.P.S.

6.12 (non modular) bricks of class designation 7.5 in - - -

foundations and plinth in : -

6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 9.50 875.27 8,315.03 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Half brick masonry with common burnt clay F.P.S.

6.13 (non modular) bricks of class designation 7.5 in - - -

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 9.50 1,054.39 10,016.72 -

5.0 Cladding Work - - - -

Stone work (machine cut edges) for wall lining etc.

(veneer work) upto 10 metre height, backing filled

with a grout of average 12 mm thick cement mortar

1:3 (1 cement : 3 coarse sand) including pointing in

8.14 white cement mortar 1:2 (1 white cement : 2 stone - - -

dust) with an admixture of pigment matching the

stone shade : (To be secured to the backing and the

sides by means of cramps and pins which shall be

paid for separately) :

White sand stone - Exposed face fine dressed with

rough backing . -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Stone work (machine cut edges) for wall lining etc.

(veneer work) upto 10 metre height, backing filled

with a grout of average 12 mm thick cement mortar

1:3 (1 cement : 3 coarse sand) including pointing in

5.2 NSI white cement mortar 1:2 (1 white cement : 2 stone Sqm 684.54 - 3,853.00 -

dust) with an admixture of pigment matching the

stone shade : (To be secured to the backing and the

sides by means of cramps and pins which shall be

paid for separately) : 30mm thick Chunar Stone

Providing and fixing stainless steel cramps of required size

and shape for anchoring stone wall lining to the backing or

securing adjacent stones in stone wall lining in cement

mortar 1:2 (1 cement : 2 coarse sand), including making the

necessary chases in stone and holes in walls wherever

Providing and fixing copper pins 7.5 cm long 6 mm

diameter for securing adjacent stones in stone wall

lining in cement mortar 1:2 (1 cement : 2 coarse sand),

including making the necessary chases.

6.0 STEEL WORK - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary

6.1 10.28 accessories & stainless steel dash fasteners , stainless Kg 2,864.25 650.95 1,864,480.79

steel bolts etc., of required size, on the top of the floor

or the side of waist slab with suitable arrangement as

per approval of Engineer-in-charge, (for payment

purpose only weight of stainless steel members shall

be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

7.0 Flooring Work - - - -

40 mm thick fine dressed stone flooring over 20 mm

11.28 (average) thick base of cement mortar 1:5 ( 1cement : 5 - - -

coarse sand) with joints finished flush. -

30 mm thick fine dressed Chunar Stone flooring over 20

7.2 NSI mm (average) thick base of cement mortar 1:5 (1 cement : 5 Sqm 789.69 - 987.00 -

coarse sand) with joints finished flush. 779,421.56

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Extra for pre finished nosing in treads of steps of Kota

stone/ sand stone slab. -

Extra for Kota stone/ sand stone in treads of steps

and risers using single length up to 1.05 metre.

8.0 Pile Work - - - -

Boring, providing and installation bored cast-in-situ

reinforced cement concrete piles of grade M-25 of specified

diameter and length below the pile cap, to carry a safe

working load not less than specified, excluding the cost of

steel reinforcement but including the cost of boring with

bentonite solution and temporary casing of appropriate

8.1 20.2 length for setting out and removal of same and the length - - -

of the pile to be embedded in the pile cap etc. by percussion

drilling using Direct mud circulation (DMC) or Bailer and

chisel technique by tripod and mechanical Winch Machine

all complete, including removal of excavated earth with all

its lifts and leads (length of pile for payment shall be

measured up to bottom of pile cap). -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Vertical load testing of piles in accordance with IS 2911

(Part IV) including installation of loading platform and

20.6 preparation of pile head or construction of test cap and - -

dismantling of test cap after test etc. complete as per

specification & the direction of Engineer in-charge.

20.6.1 Single pile upto 50 tonne capacity - -

8.2 20.6.1.1 Initial test (Test Load 2.5 times the Safe capacity) per test 1.00 60,539.00 60,539.00 -

8.3 20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity) per test 1.00 22,702.11 22,702.11 -

Lateral load testing of single pile in accordance with IS

8.4 20.8 Code of practice IS : 2911 (Part IV) for determining safe - -

allowable lateral load on pile : -

20.8.2 Above 50 tonne and upto 100 tonne capacity pile. per test 1.00 35,718.04 35,718.04 -

9.0 Horticulture & Landscaping Work - - - -

Trenching in ordinary soil up to a depth of 60 cm including

removal and stacking of serviceable materials and then

disposing of surplus soil, by spreading and neatly leveling

within a lead of 50 m and making up the trenched area to

proper levels by filling with earth or earth mixed with

sludge or / and manure before and after flooding trench

with water (excluding cost of imported earth, sludge or

Supplying and stacking sludge at site including royalty and

9.2 2.3 carriage up to 5 km (sludge measured in stacks will be Cum 9.50 313.23 2,975.68

reduced by 8% for payment). -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Supplying and stacking at site dump manure from

approved source, including carriage up to 5 km Complete

(manure measured in stacks will be reduced by 8% for

2.4.1 Screened through sieve of I.S. designation 20mm Cum 9.50 260.12 2,471.13 -

Spreading of sludge, dump manure and/or good earth in

required thickness as per direction of officer-in-charge (cost

of sludge, dump manure and/ or good earth to be paid

separately). C -

Grassing with selection No. 1 grass including watering and

maintenance of the lawn for 30 days or more till the grass

9.5 2.10 forms a thick lawn, free from weeds and fit for mowing - - -

including supplying good earth, if needed (the good earth

shall be paid for separately). -

2.10.1 In rows 5 cm apart in both directions. Sqm 9.50 17.59 167.11 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Providing and fixing M. S. tree guard 50 cm square in plan,

height 1.40 metre above ground level and 0.50 metre below

ground level. The vertical members shall consist of four nos

of angle iron of size 25x25x5 mm 1.9 long, one at each

corner and 8 nos flat iron of size 25x5 mm 1.4 long. The

vertical members shall be welded to 4 nos 25x6 mm M. S.

flats placed horizontally around the vertical member of the

cage. One name plate of 1 mm thick M.S. sheet of size

250x100 mm shall be welded to the tree guard near the

middle height and lettered CPWD / PWD/ any other

approved name. The tree guard shall be fixed to the ground

by making suitable holes and by embedding four corners

leg in the ground , including refilling the earth, compaction

etc. complete. The tree guard shall be painted with two

coats of paint of approved brand and manufacture over a

coat of primer, complete in all respect. -

Preparation of mounds of various size and shape by

available excavated / supplied earth in layers not

9.7 2.28 exceeding 20 cm in depth, breaking clods, watering of each Cum - 453.95 -

layer, dressing etc., lead upto 50 meter and lift upto 1.5 m

complete as per direction of Officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering

2.57 and removal of unserveiceable material’s as per direction of - - -

officer in charge (excluding cast of plant & water)

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

9.9 2.57.2 Shrubs Plant Each - - - -

9.10 2.57.3 Hedge Plant Each - - - -

Supply and stacking of Adansonia digitata (kalp vricksh)

9.11 7.2 plantof ht 150-165 cm in bag size of 25 cm as per direction Each 3.00 299.77 899.30

of the officer-in-charge. -

Supply and stacking of Azadirachta indica ( Neem ) plant

9.12 7.5 of height 120- 130cm in big polybag of size 25 cm as per Each 4.00 73.53 294.11

direction of the officer-in-charge. -

Supply and stacking of Ficus bengalensis (Bargad) plant of

9.13 7.28 height 120-135 cm. in big poly bags of size 25 cm as per Each 4.00 73.53 294.11

direction of the officer-in-charge. -

Supply and stacking of plant Beloperone species of height

9.14 8.3 30-45 cm. in poly bags of size 20 cm as per direction of the Each 1.00 45.25 45.25

officer-in-charge. -

Supply and stacking of plant Caesalpinia pulcherrima

9.15 8.4 species of height 45-60 cm. in earthen pot of size 20 cm as Each 1.00 50.90 50.90

per direction of the officer-in-charge. -

Supply and stacking of plant Calliandra hybrida of height

9.16 8.6 75-90 cm. with 4- 5 branches in bag of size 25 cm as per Each 1.00 50.90 50.90

direction of the officer-in-charge. -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head-Construction Of New Ghat & Steps including Railing and saftey Chain

Code No. DSR with DSR with

S.No. Description of items Unit Qty

DSR-18 applicable applicable Cost

cost index Non-DSR Index. Non-DSR

Supply and stacking of plant Nerium oleander variegated

9.17 8.50 of height 45-60 cm. in earthen pots of size 20 cm as per Each 1.00 45.25 45.25

direction of the officer-in-charge. -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

1.0 CARRIAGE OF MATERIALS

Carriage of materials by mechanical transport

including loading, unloading and stacking.

1.1 1.1.2 Earth upto 5 km cum 173.15 - -

2.0 EARTH WORK - - -

Earth work in excavation by mechanical means

(Hydraulic excavator )/ manual means over areas

(exceeding 30cm in depth. 1.5m in width as well as 10

sqm on plan) including disposal of excavated earth,

lead upto 50m and lift upto 1.5m, disposed earth to

be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

2.2 2.25 not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Supplying and filling in plinth with locally available

fine sand under floors including, watering, ramming

consolidating and dressing complete.

Supplying chemical emulsion in sealed containers

including delivery as specified. - - - -

Chlorpyriphos/ Lindane emulsifiable concentrate of

Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment

(excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry

apron using chemical emulsion @ 2.25 litres per

linear metre including drilling and plugging holes

With Chlorpyriphos/ Lindane E.C. 20% with 1%

concentration 61.75 metre 44.63 2,755.65 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Treatment of soil under existing floors using

chemical emulsion @ one litre per hole, 300 mm apart

2.35.3 including drilling 12 mm diameter holes and

plugging with cement mortar 1 :2 (1 cement : 2

Coarse sand) to match the existing floor: - - - -

With Chlorpyriphos/Lindane E.C. 20% with 1%

concentration 107.35 sqm 256.84 27,571.66 -

3.0 CONCRETE WORK - - - -

Providing and laying in position cement concrete of

4.1 specified grade excluding the cost of centring and

shuttering - All work upto plinth level : - - - -

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded

stone aggregate 20 mm nominal size). 9.50 cum 7,679.26 72,953.01 -

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size). 15.20 cum 6,549.20 99,547.77 -

Providing and laying cement concrete in retaining

walls, return walls, walls (any thickness) including

attached pilasters, columns, piers, abutments, pillars,

posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain

window sills, fillets, sunken floor,etc., up to floor five

level,excluding the cost of centering, shuttering and

finishing : - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) 1.05 cum 9,676.85 10,175.51 -

Providing and laying damp-proof course 40mm thick

with cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate 12.5mm nominal size).

Extra for providing and mixing water proofing

4.12 material in cement concrete work @ 1 kg per 50kg of per 50Kg

cement. 2.85 cement 63.97 182.31 -

Applying a coat of residual petroleum bitumen of

penetration 80/100 of approved quality using 1.7kg

per square metre on damp proof course after

cleaning the surface with brushes and finally with a

piece of cloth lightly soaked in kerosene oil.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Making plinth protection 50 mm thick of cement

concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size) over 75 mm

3.2 4.17 bed by dry brick ballast 40 mm nominal size well

rammed and consolidated and grouted with fine

sand including sinishing the top smooth 19.00 Sqm 694.61 13,197.65 -

4.0 REINFORCED CEMENT CONCRETE - - - -

Centring and shuttering including strutting,

propping etc. and removal of form for : - - - -

Foundations, footings, bases of columns, etc. for mass

Walls (any thickness) including attached pilasters,

5.9.2 butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and

access platform. 137.75 sqm 783.98 107,992.99 -

4.3 5.9.4 Shelves (Cast in situ) 2.85 sqm 783.98 2,234.34 -

Lintels, beams, plinth beams, girders, bressumers and

Columns, Pillars, Piers, Abutments, Posts and Struts.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Extra for additional height in centring, shuttering

where ever required with adequate bracing,

propping etc. including cost of de-shuttering and

decentring at all levels, over a height of 3.5 m, for

every additional height of 1 metre or part thereof

(Plan area to be measured) - - - -

Suspended floors, roofs, landing, beams and

5.11.1 balconies (Plan area to be measured).

Providing, hoisting and fixing up to floor five level

precast reinforced cement concrete in small lintels

not exceeding 1.5m clear span up to floor five level,

including the cost of required centering, shuttering

but , excluding the cost of reinforcement, with 1:1.5:3

(1 cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size).

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing precast cement concrete Jali 1:2:4 (1 cement

: 2 coarse sand: 4 graded stone aggregate 6 mm

nominal size), reinforced with 1.6 mm dia mild steel

wire, including centering and shuttering, roughening

cleaning, fixing and finishing in cement mortar 1:3 (1

cement: 3 fine sand) etc. complete, excluding

plastering of the jambs, sills and soffits.

Reinforcement for R.C.C. work including

5.22 straightening, cutting, bending, placing in position

and binding all complete. - - - -

5.22.1 Upto Plinth / Above plinth - - - -

4.7 5.22.6 Thermo-Mechanically Treated bars. 11,133.05 kg 94.46 1,051,574.46 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and laying in position machine batched

and machine mixed design mix M-25 grade cement

concrete for reinforced cement concrete work, using

cement content as per approved design mix,

including pumping of concrete to site of laying but

excluding the cost of centering, shuttering, finishing

and reinforcement, including admixtures in

5.33 recommended proportions as per IS: 9103 to

accelerate, retard setting of concrete, improve

workability without impairing strength and

durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @

330 kg/cum. Excess/ less cement used as per design

mix is payable/recoverable separately).

5.33.1 All works upto plinth level 41.80 cum 9,046.55 378,145.61 -

4.10 5.33.2 All works above plinth level upto floor V level 57.95 cum 10,634.24 616,254.30 -

Add for using extra cement in the items of design

4.11 5.35 mix over and above the specified cement content

5.0 BRICK WORK - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in: - - - -

5.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 12.35 cum 6,965.31 86,021.55 -

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level

in all shapes and sizes in : - - - -

5.2 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 40.85 cum 8,586.32 350,751.05 -

Half brick masonry with common burnt clay F.P.S.

(non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 63.71 Sqm 1,054.39 67,174.12 -

Extra for providing and placing in position 2 Nos

6.15 6mm dia. M.S. bars at every third course of half brick

6.0 MARBLE W O R K - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing 18mm thick gang saw cut

mirror polished (premoulded and prepolished)

machine cut for kitchen platforms, vanity counters

,window sills , facias and similar locations of

required size of approved shade, colour and texture

8.2 laid over 20mm thick base cement mortar 1:4 (1

cement : 4 coarse sand) with joints treated with white

cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing moulding and

polishing to edge to give high gloss finish etc.

complete at all levels. - - - -

8.2.2 Granite of any colour and shade - - - -

Providing edge moulding to 18 mm thick marble

stone counters, Vanities etc., including machine

8.3 polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-

Charge. - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Extra for fixing marble /granite stone over and above

corresponding basic item, in facia and drops of width

upto 150 mm with epoxy resin based adhesive

including cleaning etc. complete. 4.75 metre 491.22 2,333.31 -

Extra for providing opening of required size & shape

for wash basins/ kitchen sink in kitchen platform,

vanity counters and similar location in

marble/Granite/stone work including necessary

holes for pillar taps etc. including rubbing and

polishing of cut edges etc. complete. 5.70 each 830.92 4,736.26 -

7 SUB HEAD - WOOD AND PVC WORK - - - -

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought

framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length ( hold

fast lugs or dash fastener shall be paid for

separately). - - - -

7.1 9.1.1 Second class teak wood - cum 147,263.07 - -

9.7.7 Float glass panes - - - -

9.7.7.2 5.5 mm thick glass panes - sqm 2,394.64 - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing glazed shutters for doors,

windows and clerestory windows using 4 mm thick

9.9 float glass panes, including ISI marked M.S. pressed

butt hinges bright finished of required size with

necessary screws. - - - -

7.2 9.9.1 Second class teak wood - - - -

9.9.1.2 30 mm thick shutters - sqm 4,480.91 - -

Providing and fixing ISI marked flush door shutters

conforming to IS: 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and

face veneers on both faces of shutters : - - - -

35 mm thick including ISI marked Stainless Steel butt

hinges with necessary screws. - sqm 2,134.24 - -

25 mm thick (for cupboard) including ISI marked

9.21.3 nickel plated bright finished M.S. piano hinges with

necessary screws - sqm 2,016.19 - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Extra for providing lipping with 2nd class teak wood

battens 25 mm minimum depth on all edges of

shutters (over all area of door shutter to be

measured) Over item no. 9.20 and 9.21. - sqm 457.12 - -

Extra for providing vision panel not exceeding 0.1

sum in all type of flush doors (cost of glass excluded)

(overall area of door shutter to be measured) :

9.24.1 Rectangular or square. - sqm 196.77 - -

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or

round bars etc. including priming coat with

approved steel primer all complete. - - - -

9.48.1 Fixed to steel windows by welding - kg 186.99 - -

Providing and fixing aluminium sliding door bolts,

ISI marked anodised (anodic coating not less than

7.5 9.96 grade AC 10 as per IS : 1868), transparent or dyed to

required colour or shade, with nuts and screws etc.

complete : - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing aluminium tower bolts, ISI

marked, anodised (anodic coating not less than grade

9.97 AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc.

complete : - - - -

Providing and fixing aluminium handles, ISI marked,

anodised (anodic coating not less than grade AC 10

9.100 as per IS : 1868) transparent or dyed to required

colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door

stopper, ISI marked, anodised (anodic coating not

9.101 less than grade AC 10 as per IS : 1868) transparent or

dyed to required colour and shade, with necessary

screws etc. complete. - - - -

7.10 9.101.2 Twin rubber stopper 9.50 each 70.19 666.81 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing & Fixing decorative high pressure

laminated sheet of plain / wood grain in gloss / matt

/ suede finish with high density protective surface

layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S including cost of

adhesive of approved quality. - - - -

Providing and fixing magnetic catcher of approved

quality in cupboard / ward robe shutters, including

fixing with necessary screws etc. complete.

9.114.2 Double strip (horizontal type) - each 35.12 - -

Providing and fixing Fiber Glass Reinforced plastic

(FRP) Door Frames of cross-section 90 mm x 45 mm 80.75 metre 769.05 62,100.49 -

9.122 Providing and fixing to existing door frames. - - - -

30 mm thick Glass Fibre Reinforced Plastic (FRP)

9.122.1 panelled door shutter of required colour and 27.55 sqm 3,919.66 107,986.76 -

approved brand and manufacture, made with fire - - - - -

8.0 STEEL WORK - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing in position collapsible steel

shutters with vertical channels 20x10x2 mm and

braced with flat iron diagonals 20x5 mm size, with

top and bottom rail of T-iron 40x40x6 mm, with 40

mm dia steel pulleys, complete with bolts, nuts,

locking arrangement, stoppers, handles, including

applying a priming coat of approved steel primer.

Providing and fixing 1mm thick M.S. sheet door with

frame of 40x40x6 mm angle iron and 3 mm M.S.

8.2 10.5 gusset plates at the junctions and corners, all

necessary fittings complete, including applying a

priming coat of approved steel primer. - - - -

Using M.S. angels 40x40x6 mm for diagonal braces

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing pressed steel door frames

conforming to IS: 4351, manufactured from

commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if

required angle threshold of mild steel angle of

section 50x25 mm, or base ties of 1.60 mm, pressed

10.14 mild steel welded or rigidly fixed together by

mechanical means, including M.S. pressed butt

hinges 2.5 mm thick with mortar guards, lock strike-

plate and shock absorbers as specified and applying

a coat of approved steel primer after pre-treatment of

the surface as directed by Engineer-in-charge:

Fixing with adjustable lugs with split end tail to each

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing circular/ Hexagonal cast iron or

M.S. sheet box for ceiling fan clamp of internal dia

140mm, 73mm height, top lid of 1.5mm thick M.S.

sheet with its top surface hacked for proper bonding,

top lid shall be screwed into the cast iron/ M.S. sheet

box by means of 3.3mm dia. round headed screws,

one lock at the corners. Clamp shall be made of

12mm dia M.S. bar bent to shape as per standard

Steel work welded in built up sections/ framed work

including cutting, hoisting, fixing in position and

10.25 applying a priming coat of approved steel primer

using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases

10.25.1 including use of chequered plate wherever required,

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works 1,045.00 Kg 148.19 154,855.62 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts

complete i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor

or the side of waist slab with suitable arrangement as

per approval of Engineer-in-charge. ( for payment

purpose only weight of stainless steel members shall

be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.)

Providing and laying pressed clay tiles (as per

approved pattern 20 mm nominal thickness of

approved size) on roofs jointed with cement mortar

12.20 1:4 (1 cement : 4 coarse sand) mixed with 2% integral

water proofing compound, laid over a bed of 20 mm

thick cement mortar 1:4 (1 cement : 4 coarse sand)

and finished neat complete. 35.15 sqm 661.24 23,242.69 -

9.0 FLOORING - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Chequered terrazo tiles 22 mm thick with graded

marble chips of size up to 6 mm in floors, jointed

with neat cement slurry mixed with pigment to

9.1 11.19 match the shade of the tiles including rubbing and

polishing complete, on 20 mm thick bed of cement

mortar 1:4 (1 cement :4 coarse sand) :

11.19.1 Light shade using white cement. - Sqm 1,384.48 - -

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement: 3 coarse sand) and

jointed with grey cement slurry mixed with pigment

to match the shade of the slabs, including rubbing

and polishing complete. 9.50 Sqm 2,047.53 19,451.52 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS : 15622 (thickness to be

specified by the manufacturer ) of approved make in

all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge

9.2 8.31 in skirting, risers of steps and dados over 12 mm

thick bed of cement Mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg

per sum including pointing in white cement mixed

with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor

tiles 300x300 mm or more (thickness to be specified

by the manufacturer) of 1st quality conforming to IS :

15622 of approved make in colours White, Ivory,

9.3 11.39 Grey, Fume Red Brown, laid on 20mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand) including

grouting the joints with white cement and matching

pigments etc., complete.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1mx1mx400micron,

finished with 12mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

11.0 FINISHING - - - -

13.1 12 mm cement plaster of mix : - - - -

15 mm cement plaster on the rough side of single or

half brick wall of mix : - - - -

18 mm cement plaster in two coats under layer 12

mm thick cement plaster 1:5 (1 cement: 5 coarse sand)

finished with a top layer 6mm thick cement plaster

11.4 13.16 6 mm cement plaster of mix : - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Distempering with oil bound washable distemper of

11.5 13.41 approved brand and manufacture to give an even

New work (two or more coats) over and including

priming coat with cement primer. 79.80 sqm 173.58 13,851.89 -

Painting with synthetic enamel paint of approved

11.6 13.62 brand and manufacture of required colour to give an

even shade: - - - -

Two or more coats on new work over an under coat

13.62.1 of suitable shade with ordinary paint of approved

brand and manufacture. 52.25 sqm 200.39 10,470.49 -

Finishing walls with textured exterior paint of

required shade - - - -

New work (Two or more coats applied @ 3.28 ltr/ 10

13.45.1 sum. over and including base coat of water proofing

cement paint applied @ 2.20 kg/ 10 sum). - sqm 262.44 - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

13.80 manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having

VOC (Volatile Organic Compound ) content less than

50 grams/ litre, of approved brand and manufacture,

including applying additional coats wherever

required, to achieve even shade and colour.

Finishing walls with 100% Premium acrylic emulsion

paint having VOC less than 50 gm/litre and UV

resistance as per IS 15489:2004, Alkali & fungal

resistance, dirt resistance exterior paint of required

shade (Company Depot Tinted) with silicon

additives. - - - -

New work (Two or more coats applied @ 1.43 litre/

13.48A.1 10 sqm. Over and including priming coat of exterior

primer applied @ 0.90 litre/10 sqm. 446.50 sqm 165.38 73,842.81 -

ALUMINIUM WORK - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

21.1 built up standard tubular sections/ appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl - - - -

21.1.1 For fixed portion. - - - -

Powder coated aluminium (minimum thickness of

powder coating 50 micron) - Kg 516.17 - -

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever

required including the cost of PVC / neoprene gasket

required (Fittings shall be paid for separately).

Powder coated aluminium (minimum thickness of

powder coating 50 micron) - Kg 618.03 - -

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per

21.3 the architectural drawings and the directions of

Engineer-in-charge . (Cost of aluminium snap

beading shall be paid in basic item):

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

21.3.2 With float glass panes of 5.50 mm thickness - Sqm 1,466.49 - -

12.0 WATER PROOFING - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Providing and laying integral cement based water

proofing treatment including preparation of surface

as required for treatment of roofs, balconies, terraces

etc consisting of following operations: a) Applying a

slurry coat of neat cement using 2.75 kg/sqm. of

cement admixed with water proofing compound

conforming to IS. 2645 and approved by Engineer-in-

charge over the RCC slab including adjoining walls

upto 300mm height including cleaning the surface

before treatment. b) Laying brick bats with mortar

using broken bricks/brick bats 25 mm to 115mm size

with 50% of cement mortar 1:5 (1 cement : 5 coarse

sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement mortar of

mix 1:5 (1 cement :5 coarse sand ) admixed with

water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge to required

slope and treating similarly the adjoining walls upto

300 mm height including rounding of junctions of

walls and slabs c) After two days of proper curing

applying a second coat of cement slurry using

2.75kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by

Engineer-in-charge. d) Finishing the surface with 20

mm thick jointless cement mortar of mix - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

1:4 (1 cement :4 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge including laying

glass fibre cloth of approved quality in top layer of

plaster and finally finishing the surface with trowel

with neat cement slurry and making pattern of

300x300 mm square 3mm deep. e) The whole terrace

so finished shall be flooded with water for a

minimum period of two weeks for curing and for

final test. All above operations to be done in order

and as directed and specified by the Engineer-in-

Charge : - - -

With average thickness of 120mm and minimum

thickness at khurra as 65 mm. 100.70 Sqm 1,581.98 159,305.71 -

Pile Work - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Amenities

Description of items Rate Amount

Code No. DSR with DSR with

DSR-18 applicable applicable cost

Qty. Unit cost index Non-DSR index Non-DSR

Boring, providing and installation bored cast-in-situ

reinforced cement concrete piles of grade M-25 of

specified diameter and length below the pile cap, to

carry a safe working load not less than specified,

excluding the cost of steel reinforcement but

including the cost of boring with bentonite solution

and temporary casing of appropriate length for

setting out and removal of same and the length of the

pile to be embedded in the pile cap etc. by percussion

drilling using Direct mud circulation (DMC) or Bailer

and chisel technique by tripod and mechanical

Winch Machine all complete, including removal of

excavated earth with all its lifts and leads (length of

pile for payment shall be measured up to bottom of

TOTAL AMOUNT 4,911,557.64 -

TOTAL AMOUNT 4,911,557.64 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

1.0 EARTH WORK

Earth work in excavation by mechanical means (Hydraulic

excavator )/ manual means over areas (exceeding 30cm in

depth. 1.5m in width as well as 10 sqm on plan) including

1.1 2.6 disposal of excavated earth, lead upto 50m and lift upto

1.5m, disposed earth to be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in layers

not exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

Supplying and filling in plinth with Jamuna sand under

1.3 2.27 floors, including watering, ramming, consolidating and cum 103.55 2,209.29 228,772.00 -

dressing complete.

1.4 16.3 Supplying and stacking at site. - - - -

2.0 CONCRETE WORK - - - -

Providing and laying in position cement concrete of

4.1 specified grade excluding the cost of centring and shuttering - - - -

- All work upto plinth level :

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone

aggregate 40 mm nominal size).

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate

40 mm nominal size).

3.0 REINFORCED CEMENT CONCRETE - - - -

Centring and shuttering including strutting, propping etc.

and removal of form for :

Foundations, footings, bases of columns, etc. for mass

Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access

Lintels, beams, plinth beams, girders, bressumers and

3.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm - 829.96 - -

3.5 5.9.9 Arches,domes,vaults upto 6m span sqm - 1,937.97 - -

3.6 5.9.19 Weather shade,Chajjas, corbels etc. including edges sqm - 867.35 - -

Extra for shuttering in circular work (20% of respective

centring and shuttering items)

Reinforcement for R.C.C. work including straightening,

3.8 5.22 cutting, bending, placing in position and binding all - - - -

5.22.6 Thermo-Mechanically Treated bars. kg 40,714.15 94.46 3,845,663.18 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Providing and laying in position machine batched and

machine mixed design mix M-25 grade cement concrete for

reinforced cement concrete work, using cement content as

per approved design mix, including pumping of concrete to

site of laying but excluding the cost of centering,

5.33 shuttering,finishing and reinforcement, including - - - -

admixtures in recommended proportions as per IS: 9103 to

accelerate, retard setting of concrete, improve workability

without impairing strength and durability as per direction

of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330

kg/cum. Excess/less cement used as per design mix is - - - -

payable/recoverable separately

3.9 5.33.1 All works upto plinth level cum 380.95 9,046.55 3,446,281.61 -

3.10 5.33.2 All works above plinth level up to floor v level cum - 10,634.24 - -

3.11 5.34 Extra for providing richer mixes at all floor levels. - - - -

Note:- Excess/less cement over the specified cement content

used is payable /recoverable separately. - - - -

Providing M-35 grade concrete instead of M-25 grade BMC

5.34.2 /RMC. (Note:- Cement content considered in M-30 is @ 340 cum - 157.75 - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Add for using extra cement in the items of design mix over

and above the specified cement content therein.

4.0 BRICK WORK - - - -

Brick work with F.P.S. bricks of class designation 75 in

foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 4.75 6,965.31 33,085.21 -

Brick work with common burnt clay FPS (non Modular)

4.2 6.4 bricks of class designation 7.5 in superstructure above plinth - - - -

level upto floor V level in all shapes and sizes in

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 76.95 8,586.32 660,717.10 -

5.0 CLADDING WORK WORK - - - -

Providing and fixing 18mm thick gang saw cut mirror

polished (premoulded and prepolished) machine cut for

kitchen platforms, vanity counters ,window sills , facias and

similar locations of required size of approved shade, colour

and texture laid over 20mm thick base cement mortar 1:4 (1

8.2 cement : 4 coarse sand) with joints treated with white - - - -

cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing moulding and polishing to edge

to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to edge

8.3 to give high gloss finish etc. complete as per design - - - -

approved by Engineer-in-Charge.

Extra for fixing marble /granite stone over and above

corresponding basic item, in facia and drops of width upto

150 mm with epoxy resin based adhesive including cleaning

Stone work (machine cut edges) for wall lining etc.

(veneer work) upto 10 metre height, backing filled

with a grout of average 12 mm thick cement mortar 1:3

(1 cement : 3 coarse sand) including pointing in white

8.14 cement mortar 1:2 (1 white cement : 2 stone dust) with - - - -

an admixture of pigment matching the stone shade :

(To be secured to the backing and the sides by means

of cramps and pins which shall be paid for separately)

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

White sand stone - Exposed face fine dressed with

rough backing .

Stone work (machine cut edges) for wall lining etc.

(veneer work) upto 10 metre height, backing filled

with a grout of average 12 mm thick cement mortar 1:3

(1 cement : 3 coarse sand) including pointing in white

0.1 NSI cement mortar 1:2 (1 white cement : 2 stone dust) with Sqm - - 3,853.00 - -

an admixture of pigment matching the stone shade :

(To be secured to the backing and the sides by means

of cramps and pins which shall be paid for separately)

: 30mm thick Chunar Stone

Providing and fixing stainless steel cramps of required size

and shape for anchoring stone wall lining to the backing or

securing adjacent stones in stone wall lining in cement

mortar 1:2 (1 cement : 2 coarse sand), including making the

necessary chases in stone and holes in walls wherever

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Providing and fixing copper pins 7.5 cm long 6 mm

diameter for securing adjacent stones in stone wall

lining in cement mortar 1:2 (1 cement : 2 coarse sand),

including making the necessary chases.

6.0 STEEL WORK - - - -

Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and

6.1 10.25 applying a priming coat of approved steel primer - - - -

using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works

7.0 Flooring Work - - - -

40 mm thick fine dressed stone flooring over 20 mm

11.28 (average) thick base of cement mortar 1:5 ( 1cement : 5 - - - -

coarse sand) with joints finished flush.

30 mm thick fine dressed Chunar Stone flooring over 20

7.2 NSI mm (average) thick base of cement mortar 1:5 (1 cement : 5 Sqm 825.55 - 987.00 - 814,817.85

coarse sand) with joints finished flush.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade

including rubbing , curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement: 5 coarse sand) finished with a

top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine

Finishing walls with textured exterior paint of required

New work (Two or more coats applied @ 3.28 ltr/ 10 sum.

13.45.1 over and including base coat of water proofing cement paint Sqm 615.60 262.44 161,557.08 -

applied @ 2.20 kg/ 10 sum).

1.0 Pile Work - - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Boring, providing and installation bored cast-in-situ

reinforced cement concrete piles of grade M-25 of specified

diameter and length below the pile cap, to carry a safe

working load not less than specified, excluding the cost of

steel reinforcement but including the cost of boring with

bentonite solution and temporary casing of appropriate

1.1 20.2 length for setting out and removal of same and the length of - - - -

the pile to be embedded in the pile cap etc. by percussion

drilling using Direct mud circulation (DMC) or Bailer and

chisel technique by tripod and mechanical Winch Machine

all complete, including removal of excavated earth with all

its lifts and leads (length of pile for payment shall be

measured up to bottom of pile cap).

Vertical load testing of piles in accordance with IS 2911 (Part

IV) including installation of loading platform and

20.6 preparation of pile head or construction of test cap and - - - -

dismantling of test cap after test etc. complete as per

specification & the direction of Engineer in-charge.

20.6.1 Single pile upto 50 tonne capacity - - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

1.2 20.6.1.1 Initial test (Test Load 2.5 times the Safe capacity) per test - 60,539.00 - -

1.3 20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity) per test - 22,702.11 - -

Lateral load testing of single pile in accordance with IS Code

1.4 20.8 of practice IS : 2911 (Part IV) for determining safe allowable - - -

lateral load on pile :

20.8.2 Above 50 tonne and upto 100 tonne capacity pile. per test - 35,718.04 - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Promenade including Planter, Sitting & Retaining wall

Item of Work Rate Amount

Code No. DSR with DSR with

S.No. Unit QTY

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

Supplying and placing 2000 watt Portable, compact and

silent type water jet cleaner having Corrosion resistant finish

with gun, weatherproof and long lasting strong material

body and frame with best finish, appropriate sized wheels

for easy mobility and rubberized grips complete all

accessories as required.

Pressure - 150 Bar

Flow Rate - 8 L/min

Motor Rating - 3 HP

NSI Power Source - Electric Motor Set 1.00 - 30,000.00 - 30,000.00

Frequency - 50 HZ

Motor Phase - Three Phase

Flow rate minimum - 7LPM

Hose Length - 10 Meters

Voltage - 220-240V

Winding – Copper

Working Pressure – 15 MPa

Maximum Pressure – 19 MPa

Country of Origin Made in India.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Code No. DSR with DSR with

S.N. Description of Item Qty. Unit

DSR-18 applicable Non-DSR applicable cost Non-DSR

cost index index

SUB HEAD-I :- CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

1.1 4.1 excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm

SUB HEAD-II :- ROAD WORKS - - - -

2.1 16.68 Providing and laying 60mm thick factory made cement concrete 323.00 Sqm 972.10 313,987.24 -

Providing and laying at or near ground level factory made kerb stone of

M25 grade cement concrete in position to the required line, level and

curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),

including making joints with or without grooves (thickness of joints

2.2 16.69 except at sharp curve shall not to more than 5mm), including making 4.13 cum 9,475.10 39,088.34 -

drainage opening wherever required complete etc. as per direction of

Engineer-in-charge (length of finished kerb edging shall be measured for

payment). (Precast C.C. kerb stone shall be approved by Engineer-in-

ROAD WORK SUB HEAD TOTAL 511,730.00 -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Bank Protection

Code No. DSR with DSR with

Description of Items QTY Unit

applicable NSI applicable cost NSI

cost index index

1.0 EARTH WORK

2.0 CONCRETE WORK

3.0 SUB HEAD- 07 STONE WORK

Providing and laying Pitching on slopes

laid over prepared filter media including

3.1 R.C.D 15.4 boulder apron laid dry in front of toe of

embankment complete as per drawing

and Technical specifications.

A A Stone/Boulder 303.13 Cum 854.00 258,869.60

Providing and laying of boulder apron

laid in river front without wire crates.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Bank Protection

Code No. DSR with DSR with

Description of Items QTY Unit

applicable NSI applicable cost NSI

cost index index

Diversion of water course by sand filled

bags with bally/bamboos as may be

necessary for keeping the construction

area dry, bailing out or pumping water

during construction etc., all complete as

per specifications and drawings and any

other incidental charges, hire charges of

machineries, loading and unloading

charges with all lead and lift and as

directed by the Engineer-in-charge.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Bank Protection

Code No. DSR with DSR with

Description of Items QTY Unit

applicable NSI applicable cost NSI

cost index index

Removing the sand filled bags, cutting of

bally/ bamboos and disposing inside

specified place either, manually and / or

mechanical means all complete as directed

by the engineering-in-charge. The quoted

rate shall be inclusive of cutting the bally/

3.4 NSI bamboos at all depths, working under 296.88 cum 1,289.27 382,751.31

water if required, removal of sand bags at

the sole risk and cost of contractor,

handling, loading, transporting,

unloading and stacking the bally/

bamboo at places as per the directions of

engineering – in – charge.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- Signages

S.No. NSI No. Description of items Qty. Unit

DSR NSR DSR NSR

1.1 Unipole Signage Same as above item, Facing area Size 1200x900mm 1.00 Each 69000.00 69,000.00

Providing & fixing at all heights and locations Letters made up of Stainless steel, grade 316 of

approved make made out of laser cut shape in required design, language & font, including Per

buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ letter

adhesive/fast of approved make, all complete as per architectural drawings and direction of per cm

Engineer in charge.Hollow letters made of SS sheet 316 grade of 1.5 mm thickness letters with height

1.3 Providing and Fixing area specially text and graphic signages made out of 18 gauge stainless 2,850.00 Sqm 6.96 19,823.18

Providing & fixing at all levels and locations, informatory/ directional /warning signages in

required font, design, pattern and size made of 4 mm thick odorless Acrylic sheets of make Cast/

Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69

MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive

index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 %

(ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather

1.4 resistant, having excellent insulation properties, abrasions resistant of approved colour,of 2,850.00 Sqm 4.60 13,110.00

approved quality and make, with bevelled edges having self adhesive self luminescent vinyl

sheet ( film thickness >150 micron, luminescent duration 4-6 hours) of make 3M/ Avery or

approved equivalent over which the signage/ letter cuttout made of vinyl sheet ( film thickness >

80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design,

pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of

make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural

GRAND TOTAL OF SIGNAGES - 191,955.18

GRAND TOTAL OF SIGNAGES - 191,955.18

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

1 17 Sanitary Installations -

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

2 17.1 cistern, including flush pipe, with manually controlled device(handle lever) -

conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European

type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,

4 17.2 including flush pipe, with manually controlled device (handle lever), - - -

conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever required :

5 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 2.00 5,951.19 11,902.37

Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with unions and clamps (all in

C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and

other couplings in C.P. brass, including painting of fittings and cutting and

making good the walls and floors wherever required :

7 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. EACH 5.00 10,588.71 52,943.55 0

White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm

C.P. brass pillar tap.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983

10 17.1 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings - -

and brackets, cutting and making good the walls wherever required

11 17.10.2 Kitchen sink without drain board - - -

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

14 17.28.2 Flexible pipe - - -

17 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. EACH 10.00 50.45 504.52

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

18 17.31 approved quality) complete with 6 mm thick hard board ground fixed to EACH 6.00 1,451.39 8,708.32

wooden cleats with C.P. brass screws and washers complete.

19 17.35 Providing and fixing soil, waste and vent pipes : - - -

21 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729. M 15.00 1,140.48 17,107.14

23 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729. M 10.00 1,044.38 10,443.80

Providing and filling the joints with spun yarn, cement slurry and cement

mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes:

27 17.39 Providing and fixing plain bend of required degree. - - -

29 17.39.1.1 Sand cast iron S&S as per IS - 1729 EACH 5.00 431.38 2,156.92

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

31 17.39.2.1 Sand cast iron S&S as per IS -1729 EACH 5.00 350.50 1,752.51

32 17.44 Providing and fixing single equal plain junction of required degree : - -

34 17.44.1.1 Sand cast iron S&S as per IS - 1729 EACH 5.00 585.79 2,928.96

36 17.44.2.1 Sand cast iron S&S as per IS - 1729 EACH 4.00 453.38 1,813.54

37 17.48 Providing and fixing single unequal plain junction of required degree : - -

39 17.48.1.1 Sand cast iron S&S as per IS - 1729 EACH 5.00 788.56 3,942.80

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron

pipes and fittings of diameter:

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally

cast (spun) iron pipes of diameter :

Providing and fixing trap of self cleansing design with screwed down or

46 17.6 hinged grating with or without vent arm complete, including cost of cutting - -

and making good the walls and floors :

47 17.60.1 100 mm inlet and 100 mm outlet - -

48 17.60.1.2 Sand Cast Iron S&S as per IS: 1729. EACH 8.00 1,440.07 11,520.59

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Cutting chases in brick masonry walls for following diameter sand cast iron/

centrifugally cast (spun) iron pipes and making good the same with cement

concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5

mm nominal size ) including necessary plaster and pointing in cement mortar

1:4 (1 cement : 4 coarse sand)

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes

and fittings with two coats of synthetic enamel paint of any colour such as

chocolate grey, or buff etc. over a coat of primer (of approved quality) for new

54 17.7 Providing and fixing PTMT Bottle Trap for Wash basin and sink. - -

Bottle trap 31 mm single piece moulded with height of 270 mm, effective length

55 17.70.1 of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with EACH - 379.23 -

25 mm minimum water seal, weighing not less than 260 gms.

Bottle trap 38 mm single piece moulded with height of 270 mm, effective length

of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with

25 mm minimum water seal, weighing not less than 263 gms

Providing and fixing of Health Faucet complete as per direction of

Engineer in Charge

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Under Counter Wash basin Jaquar Model No.: FNS-WHT-40701 , 32 mm CP

brass waste Jaquar Model No. ALD-709, 32 mm C.P. brass bottle trap with pipe

to wall and C.P. wall flange Jaquar Model. No. ALD-769 L 250X190 or

approved equivalent.

57 18 Water Supply - - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge. : Concealed work,

including cutting chases and making good the walls etc

59 18.8.1 15 mm nominal outer dia .Pipes. M 40.00 463.40 18,535.84

60 18.8.2 20 mm nominal outer dia .Pipes. M 15.00 540.88 8,113.25

61 18.8.3 25 mm nominal outer dia .Pipes. M 10.00 635.68 6,356.78

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain &

62 18.9 brass threaded fittings. This includes jointing of pipes & fittings with one step - - -

CPVC solvent cement, trenching, refilling & testing of joints complete as per

direction of Engineer in Charge : External work

63 18.9.3 25 mm nominal outer dia .Pipes. M 50.00 369.51 18,475.32

Providing and fixing G.I. pipes complete with G.I. fittings including trenching

and refilling etc. : External work

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Making connection of G.I. distribution branch with G.I. main of following sizes

68 18.13 by providing and fixing tee, including cutting and threading the pipe etc. - - -

Fixing water meter and stop cock in G.I. pipe line including cutting and

70 18.14 threading the pipe and making long screws etc. complete (cost of water meter EACH 1.00 686.13 686.13

and stop cock to be paid separately).

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

72 18.17.1 25 mm dia. nominal bore EACH 4.00 562.38 2,249.50

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :

74 18.19.1 25 mm dia. nominal bore - -

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100

mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1cement :2 coarse sand : 4 graded

76 18.33 stone aggregate 20mm nominal size) , i/c necessary excavation, foundation - -

concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick finished with a floating coat of neat cement complete as per

standard design:

77 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 EACH 2.00 10,507.04 21,014.08

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double

flap surface box 400x200x200 mm (inside) with locking arrangement and RCC

top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1

cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick

finished with a floating coat of neat cement complete as per standard design

79 18.37.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 EACH 8.00 9,389.24 75,113.94

Boring with 100 mm diameter casing pipe for hand pump / tube well, in all

soils except ordinary hard rocks requiring blasting, including removing the

casing pipe after the hand pump / tube well is lowered and tested :

81 18.42.2 Beyond 6 m and up to 12 m depth. M - 742.29 -

Providing and placing in position filters of 40 mm diameter G.I. pipe with

brass strainer of approved quality.

Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for

83 18.44 tube well including cleaning and priming the tube well. M - 490.88 -

Providing and placing in position hand pump of approved quality for 40 mm

diameter G.I. pipe complete with all accessories.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the

pipe and making long screws etc. complete (New work)

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Providing and placing on terrace (at all floor levels) polyethylene water storage

tank ISI : 12701 marked, with cover and suitable locking arrangement and

making necessary holes for inlet, outlet and overflow pipes but without fittings

and the base support for tank.

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.I. double acting air valve of approved quality with

90 18.59 bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required - -

will be paid separately) :

Providing and fixing enclosed type water meter (bulk type) conforming to IS :

92 18.6 2373 and tested by Municipal Board complete with bolts, nuts, rubber - -

insertions etc. (The tail pieces if required will be paid separately) :

Providing and fixing PTMT Ball cock of approved quality, colour and make

94 18.62 complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. - -

95 18.62.3 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. EACH 4.00 536.47 2,145.89

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

97 18.75.3 25mm nominal bore. Weighing not less than 62 gms. EACH 4.00 128.28 513.11

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Drainage (STONE WARE PIPES AND FITTINGS)

NOTE : - The rates given for all the items under sub-head

` Drainage' are applicable to work executed in soils above sub- soil water level.

Extra allowance has to be made for work under sub- soil water level

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with

C.I. grating brick masonry chamber with water tight C.I. cover with frame of

300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design

101 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EACH 9.00 2,609.68 23,487.11

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

102 19.6 collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 - -

cement : 2 fine sand) including testing of joints etc. complete :

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse

sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2coarse sand : 4 graded

stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement

: 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside

105 19.7 plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) - -

finished with floating coat of neat cement and making channels in cement

concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size) finished with a floating coat of neat cement complete as per

standard design :

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy

106 19.7.3 duty) 560 mm internal diameter, total weight of cover and frame to be not less - -

than 208 kg(weight of cover 108 kg and weight of frame 100 kg) :

107 19.7.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EACH 2.00 32,388.80 64,777.60

108 19.8 Extra for depth for manholes - -

110 19.8.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 M 4.00 10,174.69 40,698.77

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS:

1786 having minimum cross section as 23 mmx25mm and over all minimum

length 263 mm and width as 165mm with minimum 112 mm space between

protruded legs having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail length on 138 mm

as per standard drawing and suitable to with stand the bend test and

chemical resistance test as per specifications and having manufacture's

permanent identification mark to be visible even after fixing, including fixing in

manholes with30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse

sand :6 graded stone aggregate 20 mm nominal size) complete as per

Constructing brick masonry chamber for underground C.I. inspection chamber

and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover

with frame (light duty) 455x610 mm internal dimensions, total weight of cover

with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame

15 kg), R.C.C. top slab with1:2:4 mix (1 cement :2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine

sand : 10graded stone aggregate 40 mm nominal size), inside plastering 12 mm

thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a

floating coat of neat cement on walls and bed concrete etc. complete as per

standard design :

Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or

114 19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EACH 6.00 9,139.30 54,835.82

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

115 19.31 Extra for depth beyond 45 cm of brick masonry chamber : - - -

117 19.31.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 M 4.00 7,495.95 29,983.81

BIO-DIGESTER TANK OF 4M X 2M X 1.25M OF 8-9MM FRP

SHEET WITH PARTIONS AND BACTERIA IMMOBIZATION

SHEET AND BACTERIA QUANTITY OF 30% OF THE

VOLUME OF TANK ( TANK VOLUME 10 METER CUBE).

Bore Well - -

Boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable

method prescribed in IS: 2800 (part I), including collectingsamples from

different strata, preparing and submitting strata chart/bore log, including hire

& running charges of all equipments, tools,plants & machineries required for

the job, all complete as per directionof Engineer-in-charge, upto 90 metre depth

below ground level.

119 23.1.1 All types of soil - -

Supplying, assembling, lowering and fixing in vertical position in borewell,

unplasticized PVC medium well casing (CM) pipe of required dia, conforming

to IS: 12818, including required hire and labourcharges, fittings & accessories

etc. all complete, for all depths, as per direction of Engineer -in-charge.

23.3.1 100 mm nominal size dia metre 160.00 679.12 108,658.55

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to

IS: 12818, including hire & labour charges, fittings & accessories etc. all

complete, for all depths, as per direction of Engineer-in-charge.

23.4.1 100 mm nominal size dia metre 40.00 736.92 29,476.81

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in

23.6 the recharge pit, over the existing layer of boulders, in required thickness, for cum 20.00 1,500.59 30,011.87

all leads & lifts, all complete as per direction 23.7 Supplying, filling, spreading

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2

23.7 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, cum 20.00 1,500.59 30,011.87

all complete as per direction of Engineer -incharge.

Gravel packing in tubewell construction in accordance with IS: 4097, including

23.8 providing gravel fine/ medium/ coarse, in required grading & sizes as per cum 24.00 1,694.20 40,660.76

actual requirement, all complete as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well,

ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size

1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A)

of required dia, conforming to IS: 8110, of reputed and approved make, having

wall thickness not less than 5.40 mm, including painted with outside surface

with two coats of anticorrosive bitumestic paint of approved brand and

manufacture, including hire & labour charges, fittings & accessories, all

complete, for all depths, as per direction of Engineer -in-charge.

23.11.1 100 mm nominal size dia metre 40.00 1,435.21 57,408.40

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Development of tube well in accordance with IS : 2800 (part I) and IS:

11189, to establish maximum rate of usable water yield without sand

content (beyond permissible limit), with required capacity air

compressor, running the compressor for required time till well is fully

developed, measuring yield of well by "V" notch method or any other

approved method, measuring static level & draw down etc. by step

draw down method, collecting water samples & getting tested in

approved laboratory, i/c disinfection of tubewell, all complete, including

hire & labour charges of air compressor, tools & accessories etc.,

all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate

to the top of bore well housing/ casing pipe, removable as per requirement, all - -

complete for borewell of:

Providing and fixing M.S. clamp of required dia to the top of casing/ housing

23.14 pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of - -

required size complete.

Providing and fixing Bail plug/ Bottom plug of required dia to the

bottom of pipe assembly of tubewell as per IS:2800 (part I). - -

NON SCHEDULE ITEMS - -

Submerible Pumps: - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Supply, installation testing & commissioning of submersible pumping set

suitable to operate on 415 volts 3 phase 50 HZ A.C. power supply including

NS water proof joint free cable, motor control panel, 200 mm dia, M.S pipe (heavy each 1.00 - 56,408.93 - 56408.93

class) column with fittings, clamps etc. complete in all respect as per details

Pump to be lowered below ground at : 60 M - -

ELECTRICAL WORKS - -

SUBHEAD - I - WIRING - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with piano type

switch, phenolic laminated sheet, suitable size M.S. box and earthing the

point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

2 1.14 following sizes of FRLS PVC insulated copper conductor, single - -

core cable in surface/ recessed medium class PVC conduit as required.

ii 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100.00 281.67 28,166.88

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

Supplying and fixing metal box of 150mm X 75mm X 60mm

deep (nominal size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including providing and fixing 3 pin 5/6

amps socket outlet and 5/6 amps piano type switch, connection,

painting etc. as required. (For light plugs to be used in non residential

Supplying and fixing metal box of 180mm X 100mm X

60mm deep (nominal size) on surface or in recess with suitable size of

5 1.30 phenolic laminated sheet cover in front including providing and fixing 6 Each 1.00 459.27 459.27

pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type

switch, connection, painting etc. as required.

Supplying and fixing of following sizes of steel conduit along with accessories

in surface/recess including painting in case of surface conduit, or

cutting the wall and making good the same in case of recessed conduit as

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Supplying of surface mounted ceiling light suitable for 1 x 12 W LED

7 NSI lamp duly powder coated and complete with all accesssories, LED lamp Each 2.00 - 2835.79 - 5671.58

etc. as required.

Supplying of general purpose batten suitable for 18W LED lamp with

aluminium symmetric reflector for surface mounting on the wall or

ceiling, housing made of CRCA sheet steel, powder coated, suitable for 20W

LED lamp etc. complete as required

i NSI Single Box type - 20W LED Each 12.00 - 2138.91 - 25666.92

Supplying of following items Power Saver A.C. electric Ceiling fans,

capacitor type with double ball bearing complete with 300 mm down

rod, canopies, shackles, blades, but without regulator suitable for operation

on 230 / 240 Volts, 50 Hz, single phase, A.C. supply etc. as reqd.

Supplying of 380 mm dia Exhaust fan (Ventilating Fans), complete with

louvers mounting rings frame as reqd.

Supplying and fixing two module stepped type electronic fan regulator on the

11 1.25 existing modular plate switch box including connections but excluding Each 0.00 386.87 -

modular plate etc. as required.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting of all types, with all

12 1.41 accessories and tube etc. directly on ceiling/ wall, including connection Each 14.00 190.04 2,660.58

with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring

the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC

insulated, copper conductor, single core cable, including providing and

fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including

13 1.50 making good the damage, connection, testing, commissioning - -

etc. as required.

Extra for fixing the louvers/ shutters complete with frame for

a exhaust fan of all sizes.

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess, complete

15 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar, - -

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

i 2.3.2 8 way, Double door Each 2.00 1,990.91 3,981.82

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Supplying and fixing following rating, double pole, (single phase and

neutral), 240 volts, residual current circuit breaker (RCCB), having a

16 2.14 sensitivity current upto 300 milliamperes in the existing MCB DB - -

connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415

volts, "C" curve, miniature circuit breaker suitable for inductive load

17 2.10 of following poles in the existing MCB DB complete with connections, - -

testing and commissioning etc.

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and salt as

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm

thick including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required. (For steel structure lightning)

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia

21 5.11 G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, Mtr 50.00 546.37 27,318.48

washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or

in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in

23 5.18 recess for loop earthing along with existing surface/ recessed conduit/ Mtr 150.00 41.85 6,278.16

submain wiring/ cable as required.

Supplying, installation, testing and commissioning of Solar street light with IP

65 LED fixture having a system wattage of 40W with 4000 lumen system

output, 160Wp high efficiency Poly crystalline solar panel certified IEC 61215

and 100Ah tubular VRLA gel battery with BIS approval. LED system lumen

efficacy shall be at least 100 lumens / watt and LED efficacy should be > 125

lm/Watt and the LED driver should have > 90% efficiency operating on 12V

DC.The battery shall not be discharged beyond 75% of capacity. The solar

charge controller should be of Microprocessor Based MPPT make with 94%

efficiency and enclosed in IP 65 box. The charge controller shall provide all

safety protections and temperature compensated charging of the battery. The

battery should be housed in a box made from galvanized steel and epoxy

polyester powder coated so that it withstands corrosion.The solar system

should be mounted on a 7.0m height Octagonal galvanized pole of 4mm

thickness which shall be secured with foundation bolts and nuts.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

25 NSI 25 M HIGH MAST - -

Supplying, installation, testing and commissioning of 25M high mast shaft in

three sections suitable for 47 m/sec wind speed, with head frame, winch

mounting bracket, luminaries carriage suitable to install 12 nos luminaries in

symmetrical arrangement.Thickness-Bottom Section: 5 mm, Middle Section: 4

mm, Top Section: 3 mm Bottom Dia: 510 mm, Top Dia: 150 mm Nos 1 367792.5

Supply of raising lowering system comprising double drum winch, 6mm

diameter SS wire rope, trailing cable, connector, integral power tool motor,

manual handle, junction box, lightening finial. (Complete Wiring material from - - 109692.5

JB to individual luminaire & MCB in base compartment are included). Nos 1 109692.5

Supply of foundation bolts M30 X 850 manufactured from special steel along

with nuts, washers, anchor plate and common template Nos 1 19357.5

Supply of LED floodlight 350W LED. Nos 5 - 20002.75 - 100013.75

Supply of LED floodlight 200W LED. Nos 2 - 15486 - 30972

Supply of LED floodlight 150W LED. Nos 7 - 9678.75 - 67751.25

Supply of LED type single dome aviation obstruction light. Nos 1 - 7097.75 - 7097.75

Supply of outdoor stand mounted feeder pillar with 63A TPN

MCB incomer, single dial time switch, 45A TP contactor for the

automatic switching of luminaries, power tool control with 2 no - - 36779.25

9A contactors and raise lower push button, Incoming 35 sq. mm

and out going 16 & 2.5 sq. mm terminals. Nos 1 36779.25

Supplying, installation, testing and commissioning of double door, lockable,

factory fabricated, distribution feeder panel suitable for out door installation

NSI made out of 2mm thik CRCA sheet, IP 55 inclosure, duly enamel painted and - -

450mm high from ground level, black painted M.S. angle iron stand complete

with following switchgears, connection, inter connection etc. as per details below

including suitable size 4 strip Al. bus bar etc.

FEEDER PILLOR - MAIN PANEL - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

INCOMING : - -

63 Amp 415 V FP MCCB having breaking capacity - 35 KA, with Rotary Handle

operating Mechanism - 1 No.

(0- 63A) Digital Ammeter with selector switch, 63/5A C.T.'s - 1 Set - -

(0-500 V) Digital Voltmeter with selector switch - 1 Set - -

Indication lamp R/Y/B with backup fuses - 1 Set of Three - -

100A strip Al. bus bars with heat shrinkable colored PVC sleeves 1 Set - -

40 Amp 415 V TP MCB having breaking capacity - 10 KA, - 3 Nos. - -

40 Amp 240 V DP MCB having breaking capacity - 10 KA, - 3 Nos. - -

Space for Metering - -

40A TP CONTACTOR -1 No. - -

TIMER (24 Hour) - 1 No. - -

Auto/ Off/ Mannual selector switch - 1No. - -

Supply,testing & commissioning of 9.0 meter high G.I. octagonal pole (Above

Ground Level) with single/double arm as per requirement of suitable length

with inbuilt junction box with 10A SP MCB, connectors for incoming/outgoing

cable connection and 300mm x 300mm x 20 mm thick base plate and bracket

(double arm/single arm whichever required) complete in all respect.

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Supplying, installation, testing and commissioning of 120W LED Street Light

IP66 LED with High performance having system lumen output of minimum

28 NSI 12000 lumens, contemporary designed housing made of die-cast aluminium, Each 2.00 - 9,020.48 - 18040.96

with street optic LENS for uniform light distribution. PF better than 0.9, CRI

better than 70 complete with all accessories.

Erection of metallic pole of following length in cement concrete 1:3:6 (1

29 11.3 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal - -

size) foundation including excavation and refilling etc. as required.

i 11.3.3 Above 6.50 metre and upto 8.00 metre Each 2.00 7,129.95 14,259.91

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire

30 NSI Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS- - -

7098 Code and technical specifications.

Supplying of XLPE insulated, PVC sheathed 1.1 KV grade aluminium

conductor armoured power cable.

i 2 x 4 sq. mm. Al. conductor Mtr 175.00 - 114.46 - 20030.5

ii 4 x 16 sq.mm. Al. conductor Mtr 75.00 - 253.06 - 18979.5

Supplying and making indoor end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of 1.1 KV grade as

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Laying of one number PVC insulated and PVC sheathed / XLPE power

33 7.1 cable of 1.1 KV grade of following size direct in ground including excavation, - -

sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number PVC insulated and PVC sheathed /

34 7.5 XLPE power cable of 1.1 KV grade of following size in the existing RCC/ - -

HUME/ METAL pipe as required.

Laying and fixing of one number PVC insulated and PVC

35 7.7 sheathed / XLPE power cable of 1.1 KV grade of following size on wall - -

surface as required.

i 7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr 80.00 44.12 3,529.34

Providing, laying and fixing following dia RCC pipe NP2

class (light duty) in ground complete with RCC collars, jointing with

36 14.14 cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm - -

deep) and refilling etc as

P.A System - -

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

Supplying, installation, testing and commissioning of 500 watt AC & 36V

DC operation, 7 Mic & 2 Aux inputs, output regulation ≤ 2Db no load to full

load at 1 kHz, frequency response 50-15,000 Hz ± 3dB, single to noise

37 NSI-21 ratio, tone control bass: ± 10dB at 100 Hz , treble: ± 10dB at 10 kHz, speaker Each 1.00 - 22,986.84 - 22,986.84

outputs 4Ω, 8Ω, 70V & 100V, power supply Ac: 220-204V 50/60Hz

DC:36V (3X12V car battery), power consumption: 1000VA DC:8A and

complete with all accessories etc required. (Ahuja Cat - SPA-5000°EM)

Supplying, installation, testing and commissioning of all

purpose PA microphone reproducing intelligible, crisp and a bright sound,

frequency response 50-15,000Hz, 2.2mV/Pa sensitivity & 500Ω impedance

with quick detachable holder with 3 pin professional XLR connector & 6

mtr twin core shielded low noise cable etc as required. (Ahuja cat – AUD-

Supply & 350-530mm high table/ floor stand base dia. 150

mm, sturdy ,mechanism ensuring trouble free movement, resistant to rust,

superior quality of chrome plating/ powder coating. (Ahuja

Supplying, installation, testing and commissioning of 100 watt /16Ω

weatherproof drive unit & required size reflex horns, high SPL, crisp

40 NSI-24 penetrating sound, voice coil precision- wound on an aluminium bobbin Each 5.00 - 5,881.80 - 29409

for efficient with dissipation, degree of protection IP66 complete all

accessories etc as required.

41 Electrical service connetion charges (L.S) LS 1.00 - 75000.00 - 75000

NBCC (INDIA) LTD. CONTRACTOR

Project- Construction of Balu Ghat-1 (50 meter), NMCG Works,Sultanganj

Estimated Cost (BOQ)

Sub Head- MEP Work

Code No. DSR with DSR with

SN Item Description Unit Qty

DSR-18 applicable NSR applicable cost NSR

cost index index

NBCC (INDIA) LTD. CONTRACTOR