Providing furniture to Newly Constructed Court Building at Arasikere, Hassan District.

Providing furniture to Newly Constructed Court Building at Arasikere, Hassan District.

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at require...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direc...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

Printing New Letter and Figures of any Shade - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. Ref...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

Preparation and Surface Treatment of Formation. - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, t...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing C.P. brass bib cock of approved quality conforming

to IS:8931 ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries an...

Providing and fixing 12 mm thick frameless toughened Glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic ...

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyan...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

Providing & fixing 100% Polyester Curtains with specification of

regular wash as per direction of Engineer in charge ---- With all lead and lift including cost and conveyance of all materials...

Providing & fixing vertical blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures ...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, w...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

Floor painting with floor enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remov...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing C.P. brass bib cock of approved quality conforming

to IS:8931 ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries an...

Supplying of.TR Invertor type split Airconditioners suitable for operation on A/Csupply singl ephase 50Hz230V with hermetically sealed inverter compressor with air cooled condenser,latest R410A/R-32 r...

Chromium plated brackets ( curtain rods) (P.No.A-18, I.No, 217 SR of 2023-24 , Volume-2) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machiner...

Chromium plated brackets ( curtain rods) (P.No.A-18, I.No, 217 SR of 2023-24 , Volume-2) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machiner...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Teak Wood Dias Railings :- Made out of 2.5"x2.5" turning legs, affixed together in 2"x1" patti at top & bottom maintaining a distance of 12" between every leg. Further finished with 3"x1.5" pattis on ...

Teak Wood Ornamental Chair with Lobo : Made out of Teak Wood, Rear leg of height 4'6" and 2.5"x1.5" section and front leg of height 18" with 2.5"x2.5" section with curve shape. Seat frame of size 3"x1...

Teak Wood Officer Table : Account Officers Table of Size 7'x3'x30" Made out of 2.25"x2.25" Teak wood legs. Table upper side patti 4"x1.25" and lower side 2"x1.25" and 12mm commercial ply with 1, lamin...

Table / Computer Table: Of size 4' x 2' made out of PLPB ( Action Tesa or Century brand) Table should consist of Right side 1 Drawer with 1 Cupboard inner side one shelf. (Item Code KSFIC.DWD/F041, FY...

Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment. (Item Code KSFIC.DWD/F085, FY 2024-25) ---- With all lead and lift including cost and conveyance o...

Office Table : Of size 4'x2.5'. Made out of 12/18 mm MDF one key board and 3 drawers on the right side . Table to be covered with 1mm laminate wherever visible. Hardware of the drawer should be telesc...

Teak Wood Raton Bottom Chair : (Seat with planks back with Teak wood Patti) leg size 2"x1.5" with front and back legs of size 37"x2"x1.5".Handle of size 2"x1.5". Chair side bars 3"x1.1/4" pattis. Chai...

Teak Wood Bench With Back : Size : 182.88cm L x 46cm W x 96cm H Legs 4.4 x 4.44cm. Patties at top and bottom around 5.68 x 2.54cm in section and polished seat shall be provided with 18mm block board w...

Teak Wood Stool : Made out of Teak Wood of height 18" including top, which is of size 12"x12" legs to be of 2"x2" thickness and top patties should be of 3"x1" thickness with bottom supporting patties ...

Book Rack with glass : Of size 6'x3'x18". Made out of 18mm thick black board with 3 shelves laminated glass sheters, Inner side paint. Outer surface polish. (Item Code KSFIC.DWD 105, FY 2023-24) ---- ...

Teak Wood Bench Without Back : Size 182.88cm L x 46cm W x 96cm H Legs 4.4 x 4.44cm. Patties at top and bottom around 5.68 x 2.54cm in section and polished seat shall be provided with 18mm block board ...

Godrej steel almirah size 198 cm H x 915 cm W x 48 cm D (Including leg of 15.24 cm) fitted with for fixed shelved making five comparments double door with three way locking device and duplicate key al...

Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet wit...

Side Table for Teak Wood Executive Table : Of size 36"x20". Teak wood Leg size 2" x 2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer. Table to be provided with one Keyboa...

High Back Cushion Chair :- High back Chair with seat and back high quality feather touch Rexin. Arms with cushioning. Chair to have ss base with 5 caster wheel legs with Syncro Mechanisum. (Item Code ...

Teak Wood "C" Model sofa set : 1+3+1 with teapoy and cushion. Made out of Teak Wood front legs 4"x4" back leg 3"x3", back leg support patti 3"x1.25" with bend. Sofa front side bars 3"x1.25" handle 3.5...

Teak Wood square leg Dining table : Of size 6'x3.5' made out of teak wood legs size 4"x4" Table upper patti 4"x1.25" top 18mm ply with sunmica or 12mm glass. (Item Code KSFIC.DWD 017, FY 2024-25) ----...

Teak Wood dining square leg chair, seat with cushion back with patti : Rose wood model Made out of teak wood leg size 2.5"x2.5" seat patties of size 3"x1.25" seat with cushion back with patties chair ...

Office Table MDF: (Suprident engineer table 6'x3') Of size 6'x3' or 5'x3'. Made out of 18 mm MDF one key board and 3 drawers on the right side. Table to be covered with 1mm laminate wherever visible. ...

Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin. (Item Code KSFIC.DWD/F054, FY 2024-25) ---- With all lead and lift including cost and conveyance of all materials,la...

Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provi...

Supply, erection, testing & commissioning of Electrical Motor Driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm directly c...

Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...

PIPE 150mm dia (I.No. 15.97.3, P.No. 91, Vol-6 of PWD Ele SR 2023-24) (Shaft)FIRE HYDRANT SYSTEM & OUTER RING LINEPump Room ---- With all lead and lift including cost and conveyance of all materials,l...

100mm dia (I.No. 15.97.4, P.No. 91, Vol-6 of PWD Ele SR 2023-24)(Stilt Floor)FIRE HYDRANT SYSTEM & OUTER RING LINEPump Room ---- With all lead and lift including cost and conveyance of all materials,l...

80mm dia (I.No. 15.97.5, P.No. 91, Vol-6 of PWD Ele SR 2023-24) (Stilt Floor)FIRE HYDRANT SYSTEM & OUTER RING LINEPump Room ---- With all lead and lift including cost and conveyance of all materials,l...

65mm dia (I.No. 15.97.6, P.No. 91, Vol-6 of PWD Ele SR 2023-24) (Stilt Floor)FIRE HYDRANT SYSTEM & OUTER RING LINEPump Room ---- With all lead and lift including cost and conveyance of all materials,l...

50 mm dia (I.No. 15.97.7, P.No. 91, Vol-6 of PWD Ele SR 2023-24) (Stilt Floor)Pump Room ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineri...

40 mm dia (I.No. 15.97.8, P.No. 91, Vol-6 of PWD Ele SR 2023-24)(Stilt Floor)Pump Room ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machinerie...

32 mm dia (I.No. 15.97.9, P.No. 91, Vol-6 of PWD Ele SR 2023-24)(Stilt Floor)Pump Room ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machinerie...

25mm dia (I.No. 15.97.10, P.No. 91, Vol-6 of PWD Ele SR 2023-24)(Stilt Floor)Pump Room ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machinerie...

Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete - etc., complete as per specificaiton with all lead a...

150mm dia CI butterfly valves (I.No. 15.127.2, P.No. 94, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries...

100mm Dia CI butterfly valves (I.No. 15.127.3, P.No. 94, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries...

80mm Dia CI butterfly valves (I.No. 15.127.6, P.No. 94, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries ...

65mm Dia CI butterfly valves (I.No. 15.127.6, P.No. 94, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries ...

Supplying installing, testing and commissioning of PN16 CI "Non ReturnValve " confirming to IS 13039 with necessary bolts and nuts etc completeincludes cost of all materials labour charges with all le...

100 mm Dia CI Non Return Valve (I.No. 15.128.3, P.No. 95, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machinerie...

80 mm Dia CI Non Return Valve (I.No. 15.128 4, P.No. 95, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries...

65 mm Dia CI Non Return Valve (I.No. 15.128 5, P.No. 95, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries...

Pressure Switch including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. - etc., complete as per specificaiton with all lead and lift, loading unloading, labour, ...

Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. etc., complete as per specificaiton with all lead and lift, loading unloadin...

Supply, Erection, Testing & commissioning of Foot Valves of Following Dimensions: 150 mm dia Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for ...

Supply, Erection, Testing & commissioning of Foot Valves of Following Dimensions: 80 mm dia Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for c...

Supplying fixing and testing of Air cushions vessel. Fabricated out of 8mm thik It is a 250 mm dia MS pipes (the ends should be dished) 1.2 M high installed verically on suitable legs. Flange connecti...

Supplying Installing, testing and commissioning of Gun metal Air Release Valve Size of 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete...

Supplying Installing, testing and commissioning of Gun metal Ball Valve Size of 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete (I.No....

COPPER CONTROL CABLE :95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) (I.No. 32.14, P.No. 40, Vol-6 of KPTCL SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labou...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm...

Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules : 8P x 0.5 Sq mm (I.No. 15.4, P.No. 40, Vol-6 of KPTCL SR 2023-24) ---- With all lead and lift inclu...

COPPER CONTROL CABLE : 10C x 2.5 Sq mm (I.No. 13.14, P.No. 40, Vol-6 of KPTCL SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machine...

2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 450 x 50 mm (I.No. 12.59.3, P.No. 54, Vol-6 of PWD Ele SR 2023-24...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip (I.No. 12.58.2, P.No. 54, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift includin...

supply and installing testing and commissioning of CI " Y " stainer confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead lift lo...

supply and installing testing and commissioning of CI " Y " stainer confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead lift lo...

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...

FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia Single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a fem...

Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal cou...

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as p...

Supplying Installing, testing and commissioning of Hose reel cabin (I.No. 15.90, P.No. 89, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labou...

Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180 swing and conforms to IS:88485 or Aluminium fitting Single Piece Compact Type. including cost of materia...

Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machine...

Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per sp...

Supplying Installing, testing and commissioning of Gun metal Air Release Valve Size oif 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complet...

Supplying Installing, testing and commissioning of, pendent Type/Upright Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed. (I.No. 15.93, ...

Supplying Installing of Horizantal side wall Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed. .(I.No. 15.94, P.No. 90, Vol-6 of PWD Ele ...

Supplying Installing, testing and commissioning of Ceiling Mounted powder coated Surface Finishing Mild Steel Rosette Plate including cost of materials, labour, usage charges of machinery complete as ...

Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as re...

Supplying Installing, testing and commissioning of hydraulically operated sprinkler Gong Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, s...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Disch...

Providing ABC Powder based MAP 50, 6Kg Supply and installation in position, testing and Commissioning 6kg Fir e Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, ...

Supply and installation of 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discha...

Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg....

Supply and installation of 9 Ltr Water type Fire Extinugisher, Stored Pressure Type, Pressur Gauge, Gross Weight 15.1kg. empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time less than ...

Supplying of four bucket stand alongwith buckets. Complete (I.No. 15.111, P.No. 93, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire...

Supplying Installation testing and Commissiong of Micro process base Fire alram Control panel having power regulation Circuit, which conner to 230 AC to at V.D.C. Indicating FIRE-FAULT, Test facility ...

P.A.System amplifier 250W RM S out put with complete wiring and controls accessable form front(I.No. 15.109, P.No. 93, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conve...

Supply Installation testing & Commissioning of conventional type photo/Heat electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC .The Optical Smoke Detector is unaffected by wind...

Supplying Installing, testing and commissioning of MIKE suitable to I.A.System. Complete(I.No. 15.110, P.No. 93, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance ...

Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54-11 s...

Supplying Installing, testing and commissioning of Electronic Hooter, it conists of electronic circuit to give dual Fire alaram sound with works. 24V DC with speaker all encased in suitable in MS 16 g...

Supplying Installing, testing and commissioning of P.A.System console panel 40 Zone cansole. with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting including cost of mate...

Supplying heavy gauge PVC conduit pipe 25 mm dia 1.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The...

Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured cable (I.No. 15.105, P.No. 92, Vol-6 of PWD Ele SR 2023-24) ---- With all lead and lift including cost and conveyance of all materi...

Providing and installing in position the following Signage printed with "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.25cm height letters in red with white back ground. The size of th...

Providing and installing in position the following Floor indentification signage GROUND FLOOR TO 6TH FLOOR. at each stair enclosure on every floor, indicating the floor number in words, lettering size...

Providing and installing in position the following Exit sinage FIRE EXIT at each stair enclosure on every floor, indicating the direction of exit, lettering size shall be 7.5 cm with contrasting colou...

Assembly area signage at Stilt floor, indicating the location of assembly in case of fire emergency, lettering size shall be 12.5 cm with contrasting colour from back ground. Size shall be 30cm x 45cm...

1. ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATIONS.

2. EVACUATE THE OCCUPANTS BY USING FIRE EXITS ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY POINTS.

1. ACTION BY SECURITY / RECEPTION UPON RECEPTION OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM.

2. ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM.

Supplying Installing testing and commission of Electrical Booster pump Control panel for fire fighting system consisting of Feeder For 1 No. of Booster pumps :-1 no of 32 A TPN MCCB (50 KA with 12.5 H...

Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, t...