Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-Finance BIRSINGHPUR | GUNA | MADHYA PRADESH | 473001 | ₹3.0 L | L1 | Accepted-Finance L1 bidder |
| 2 | L2₹6.5 LAccepted-Finance | ₹6.5 L | L2 | Accepted-Finance L2 bidder |
| Sl No | Description | Qty | Unit | ELECTRO POWER CONSTRUCTION L1 | PIYUSH ENGINEERING WORKS L2 |
|---|---|---|---|---|---|
| 1.00GENERATOR | |||||
| 1.01 | Dismantling of chequerred plates, Top and bottom air guides. Visual inspection of stator core, stator windings, rotor pole and rotor windings, pole to pole connection joints. | 1 | Nos. | 10,000 ₹11,800 | 15,000 ₹17,700 |
| 1.02 | Cleaning of stator core, stator winding, rotor poles, rotor windings, air guides, brush gear assembly, current carrying leads of rotor and bus duct etc, first by compressed air and then by using a non – lilting cloth dipped in suitable solvent e.g. white sprit, turpentine, petrol, clean to remove oil, grease, carbon dust brake duct etc. | 1 | Nos. | 20,000 ₹23,600 | 50,000 ₹59,000 |
| 1.03 | Cleaning of rotor spider, bottom bracket, brake / jack assemblies and brake track first by compressed air and then by using suitable solvent to remove oil, grease & brake duct etc. | 1 | Nos. | 9,000 ₹10,620 | 18,000 ₹21,240 |
| 1.04 | Checking & tightening all the approachable fasteners on rotor assembly including rotor fan bolts, rotor pole damping system of balancing weight, replacement /repairing of fasteners if required. | 1 | Nos. | 9,000 ₹10,620 | 16,000 ₹18,880 |
| 1.05 | Inspection of bottom guide bearing pads and cleaning of its oil chamber | 1 | Nos. | 9,000 ₹10,620 | 18,000 ₹21,240 |
| 1.06 | Centrifuging of bottom guide bearing oil chamber by centrifuging machine and top up of oil if required. | 1 | Nos. | 5,000 ₹5,900 | 10,000 ₹11,800 |
| 1.07 | Cleaning of brush gear assembly and dome, over speed device by suitable solvent and replace / fixing of carbon brushes if required. | 1 | Nos. | 5,000 ₹5,900 | 10,000 ₹11,800 |
| 1.08 | Reassembly of air guides and Chequrred plates and tightening of all the nuts / bolts properly. | 1 | Nos. | 11,000 ₹12,980 | 30,000 ₹35,400 |
| 1.09 | Outside and inside cleaning of air coolers / oil coolers and associated pipe lines, first by compressed air and then by using suitable solvent to remove oil, dust, dirt etc. | 1 | Nos. | 20,000 ₹23,600 | 56,000 ₹66,080 |
Updated dates
Tender Value
₹3.8 L
EMD Value
₹7,700
Closing Date
20 Jan 2026, 3:00 pmClosed
SE PnW, SGTPS, MPPGCL, Bisinghpur
SE PnW, SGTPS, MPPGCL, Bisinghpur
General annual overhauling of 1x20 MW hydel set of BHPS, MPPGCL, Birsinghpur.
2025_MPPGC_458703_1
458703
Open Tender
Miscellaneous Works
20 days
SGTPS, MPPGCL, Birsinghpur
As per NIT
15 documents required · 15 mandatory
₹500
Yes
₹7,700
Yes
30 Apr 2026
3 Dec 2025
23 Jan 2026
3 Dec 2025
20 Jan 2026
3 Dec 2025
GENERATOR
Dismantling of chequerred plates, Top and bottom air guides. Visual inspection of stator core, stator windings, rotor pole and rotor windings, pole to pole connection joints.
Cleaning of stator core, stator winding, rotor poles, rotor windings, air guides, brush gear assembly, current carrying leads of rotor and bus duct etc, first by compressed air and then by using a non – lilting cloth dipped in suitable solvent e.g. white sprit, turpentine, petrol, clean to remove oil, grease, carbon dust brake duct etc.
Cleaning of rotor spider, bottom bracket, brake / jack assemblies and brake track first by compressed air and then by using suitable solvent to remove oil, grease & brake duct etc.
Checking & tightening all the approachable fasteners on rotor assembly including rotor fan bolts, rotor pole damping system of balancing weight, replacement /repairing of fasteners if required.
Inspection of bottom guide bearing pads and cleaning of its oil chamber
Centrifuging of bottom guide bearing oil chamber by centrifuging machine and top up of oil if required.
Cleaning of brush gear assembly and dome, over speed device by suitable solvent and replace / fixing of carbon brushes if required.
Reassembly of air guides and Chequrred plates and tightening of all the nuts / bolts properly.
Outside and inside cleaning of air coolers / oil coolers and associated pipe lines, first by compressed air and then by using suitable solvent to remove oil, dust, dirt etc.
Dismantling cover of NGT & its cleaning/ checking tightness of neutral bus, NGT & NGR, refitting of cover of NGT after connecting NGT with neutral of generator.
Turbine -
Cleaning of turbine top cover, regulating ring, servomotors, oil pipe lines, water / air pipe lines and platform to remove dust / debris, oil / grease by suitable means using proper cleaning agent.
Servicing of vacuum braking valves, replacing defective rubber items, if required.
Checking nuts, bolts, keys, dowels of guide apparatus for looseness & tightening, if required. Checking of Kinematics of guide apparatus & adjusting, if required
Centrifuging of turbine oil of turbine guide bearing by centrifuging machine and top up of oil if required.
Servicing of hydraulic amplifier, Cleaning of governor oil filter, greasing of feedback rope pullies, adjustment of auto rod etc. of governor system.
Servicing of oil coolers & its pipelines and isolating valves etc. Attending the leakage of oil & water.
Guide vane gap measurement and adjustment as per drawing.
Inspection and painting work (paint should be provided by the contractor) of runner blades by making scaffolding inside the draft tube along with air pipe fabrication if required.
If any pitting noticed, required rectification works of runner blades
Supply & Replacement of chevron packing & cup seals of G.V. Servo motor
AUXILIARIES Cleaning, general servicing e.g., greasing etc. Of following auxiliaries of unit including specific works as mentioned against each :-
PP Set: - Servicing of Idler valves, Centrifuging of oil of P P Set & inside cleaning of PP Set oil chamber.
Drainage Pump (02No) & Dewatering Pumps (02 No’s) :-Packing, gland changing & servicing, and remove mud in drainage & dewatering Pump pit.
Brake / Jack System: - Servicing of Brake / Jack assembly & cleaning of air filters, checking & attending air/oil leakages & cleaning of brake dust collector bags.
Oil leakage unit: - Suction filter & tank cleaning.
Cooling water System: - Cleaning of CW strainers and shaft seal filters.
CGL system: - filter cleaning, topping up the grease in tank , grease provided by MPPGCL checking of dose feeder operation and attending the problem, if any.
Seepage gallery dewatering pumps (2No):- Complete overhauling of pumps and remove mud.
HS Lubrication System: - Filter cleaning & oil leakage attending.
ELECTRICAL PANELS – General cleaning/air blowing of dust/dirt etc. terminal tightening and contact cleaning by suitable cleaning agent of the following:-
Unit Control Boards.
Control & relay panels.
11 KV VCB Panel (11 KV SWGR) & 0.4 KV MCC.
AC/DC Lighting Panels
Static Excitation Panels/DVR Panels.
CO2 Panel / CO2 Banks.
AUXILIARIES CONTROL PANELS: General cleaning/air blowing of dust/dirt etc. Terminal tightening and contact cleaning by suitable cleaning agent and checking/ replacing faulty parts if required (parts provided by MPPGCL), of the following auxiliaries control panels.
Drainage Pump & Dewatering Pump.
PP Sets
Brake/ Jack System.
CGL system
HS Lube pump
Space Heater
Dust collector
Air compressors.
Oil leakage unit.
220V BATTERY (02 Nos Set) & 24 V Battery
Maintaining electrolyte level by topping up distilled water and general cleaning and application of petroleum jelly at Battery terminals.
LIGHTING TRANSFORMER & EXCITATION TRANSFORMER:-
General cleaning/air blowing of dust/dirt etc. Checking and tightening of connections/terminations of power/control cables and nut bolts.
Valve
MIV valve: - Checking & attending oil leakage, if any, from MIV valve piston and its pipe line and replace old pipe line. (If required)
MIV Hydraulic by pass valve:- Servicing and providing operation properly. (If required)
Valve No.316 :- Governor oil main line Hydraulic valve servicing and attending oil leakage.
Attending oil leakage from governor oil pressure line between P.P. Set & pressure receiver and replace old pipe line.
Attending water leakage from outlet cooling pipe lines and replace defective valves.02 Nos150 mm sluice valves.
Part- I. MISCELLANEOUS
Complete overhauling/repairing of motorized rolling Shutter Door with motor and painting with suitable paint with Asian/Burger.
Cleaning of all trenches inside the Power House. (5x2x274)
Replacement of flexible hose pipe (HMC oil return pipe line near sump tank.)
External Cleaning and painting of 1GT and 2UATs
220KV circuit breaker platform cleaning and painting
Lightning arrester/CVT structure painting 3 No each LA/CVT/CT
Painting of 220KV circuit breaker isolator marshalling box RYB indication marking
Painting of Switch yard Outer Boundary
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.82 MB
TenderScheduleandSoW458703.pdf
Tender Documents • 0.65 MB
CompleteSBD2.pdf
Tender Documents • 14.30 MB
BOQ_547862.xls
BOQ • 0.31 MB
CriteriaforJV.pdf
Additional Documents • 0.19 MB
Amendmend_and_correction_in_SBD.pdf
Additional Documents • 0.76 MB
Checklist458703.pdf
Additional Documents • 0.42 MB
Contact.xls
Additional Documents • 0.02 MB
TechnicalbidWorks458703.xls
Additional Documents • 0.31 MB
Download all tender documents and submit your bid