Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹64.1 LAccepted-AOC 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹71.2 L+₹5.1 L (7.64%)Rejected-Finance | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹79.3 L+₹13.1 L (19.8%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹79.4 L+₹13.2 L (19.9%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹81.5 L+₹15.3 L (23.2%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
Tender Value
₹92.2 L
EMD Value
₹1.6 L
Closing Date
13 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Agra
112, Taj Road, Agra Cantt
SPL REPAIR TO MES IB UNDER CWE AGRA
2023_MES_619007_1
84289/E8
Open Tender
Civil Works
Item Rate
180 days
Agra
MES contractors enlisted in Class C category a(i) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹1,000
GE West Agra
₹1.6 L
Yes
21 Dec 2023
15 Sept 2023
20 Oct 2023
15 Sept 2023
13 Oct 2023
29 Sept 2023
15 Sept 2023 - 22 Sept 2023
Amount
Dismantling brick tiles from roof top, laid bedded & pointed in any mortar and removing from site all as specified and directed.
Demolition of mud or existing roof treatment of, any thickness, including plastering and leaping and tiling of any description whether part removal or full or as specified and directed.
M&L for cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone agg) in padding, roof kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and directed.
M & L for water proofing treatment of roof slab all as follow complete all as specified and directed : - (a) M&L for preparation of roof surfaces by brushing, cleaning and Applying a priming coat with bitumen primer @ 0.5 ltr/Sqm (b) Applying a hot blown bitumen grade 85/25 @ 1.2 Kg/sqm (c) Laying APP modified water proofing membrane weighing not less than 3 Kg/Sqm will be laid over applied bitumen. (d) Applying a tack coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm and sand in confirming to Zone II in dry condition will be dusted over the bitumen @1.00 Kg/Sqm
M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching,coping , roof kerbs, mud stop, padding etc and similar work including form work including form work complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 08 shall be reused after cleaning.
M&L for brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed
M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping and bed block including necessary form work and finishing surfaces fair and even with using extra cement complete all as specified and directed
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 3% by weight of cement finished other than fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.
Supply only integral water proofing compound complete all as specified and directed.
M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of plastic emulsion paint with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed.
M&L for complete removal of extg treatment with mechanical device of old plastered surfaces of wall and applying two coats of plastic emulsion paint with roller application over a coat of primer over a coat of average 1mm thick wall care putty on old decorated wall surfaces complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm exterior arcylic putty over new wall surface complete all as specified and directed.
Material & Labour for complete removal of existing treatment with mechanical device on old wall surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm and including priming coat of exterior primer @ 0.90Ltr/10Sqm over 1mm exterior arcylic putty including complete removal of existing treatment old wall surface complete all as specified and directed.
M&L for two coats of cement based paint over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and directed.
M&L for complete removal of existing treatment with mechanical device of old plastered surfaces of wall and applying two coats of cement based paint including complete removal of existing treatment or plastered surfaces of walls complete all as specified and directed.
M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.
M&L for applying two coats of white wash on ceiling including preparation of old plastered or un-plastered surfaces, complete all as specified and directed.
M&L for complete removal of existing treatment with mechanical device of old plastered surfaces of wall and applying two coats of white wash (match with new surface) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface of size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over & including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .
M&L for double charged vetrified ceramic tiles any shade 10 mm thick (square/rectangular) area of each tile exceeding exc. 0.42 Sqm but not exc 1.00 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.
M&L for double charged vetrified ceramic tiles any shade 10 mm thick (square/rectangular) area of each tile exceeding exc. 0.42 Sqm but not exc 1.00 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for non skid-ceramic tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M&L for non skid-ceramic tiles joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.
M&L for non skid ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick screed bed or bedding layer of cment mortar (1:4) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection laying in alternate ways cutting grooves and filling bitumen mastic mixed with sand and finished even and smooth without using extra cement all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base of floor/path/paving finished even and fair without using extra cement complete all as specified & directed.
M&L for endura vetrified parking tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray pigment cement and pigments neat cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.
M&L for 20 mm thick granite in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding edges of stone slab one edge over and including 15mm thick screed bed or bedding layer of cment mortar (1:4) complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floor,wall, aprons including cement mortar bedding (incl backing) complete all as specified and directed.
Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
M & L for cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good disturbed surface by using cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as required complete all as specified and directed.
M & L for cutting holes into or through brick wall built in cement mortar superfacial area exc 150 Sqcm not exc 400 Sqcm and making good disturbed surface by using cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as required complete all as specified and directed.
S&F for mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed..
S&F for 25 mm to 35 mm thick stone slab dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in neat cement slurry complete all as specified and directed.
M&L for one coat of epoxy resin (FAIR BOND EP) on old concrete surface @ 0.30 kg/Sqm including preparation of surface as per manufacturer's instruction and applying 25 mm thick on ceiling, beams, chajjas & facia surface etc (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free sprey concrete plasticiser (spray crete) as per manufacturer's instruction with guniting machine of pressure capacity not less than 5kg per Sqm and finished the surface even & smooth with 10 mm thick cement plaster in CM 1:4 complete all as specified &as directed .
S&F for galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
All as per item No 49 above but 20mm bore
Supply and fixing for 20 mm bore galvanised tubes medium grade , with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed.
Supply and fixing for 25 mm bore galvanised tubes medium grade , with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed.
Supplying and laying 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S & F for 20 mm outer diameter CPVC brass elbow fixing to CPVC pipes any location complete all as specified and directed.
S & F for 20 mm outer diameter of CPVC brass tee fixing to CPVC pipes any location complete all as specified and directed.
M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.
S&F in repair Europen water closet snow white (one piece EWC with seat cover and twin flush fitting) of size 710 x 390 x 790mm incl necessary 'P' or 'S' trap and connection to drain pipe etc with and incl necessary fixing arrangement incl seat cover manufactures instructions complete all as specified and directed.
S&F in repairs wash basin snow white (one piece wash basin with integrated pedestal of size 480 x 425 x 365 mm incl necessary fixing arrangements as per manufactures instructions complete all as specified and directed.
S&F in repair CP Waste coupling (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin and sink complete all as specified and directed.
S&F in repair basin mixer single lever, cast copper alloy, fancy type, chromium plated without Pop up waste system with 450mm long braided connection pipe complete screwed down for 15mm bore GI Pipe complete all as specified and directed.
S&F in repair wall mixer with bend pipe for over head shower (3-in-1 system)cast copper alloy, fancy type, chromium plated with 210mm long bend pipe connecting legs and wall flange (without over head shower) screwed down for 15mm bore iron pipe complete all as specified and directed.
S&F for 32 mm dia PVC waste pipe 600 to 850 mm long for wash basin /sinks complete all as specified and directed.
S&F in repairs 700 x 500mm size beveled edge moulded looking mirror of 5mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection including washers bolt etc. complete all as evity protection and long specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed
S & F in repair CP tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F in repairs CP health faucet ABS body with 1.00m SS braided connection pipe, fancy type with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed.
S & F in repairs toilet paper holder with flat recessed type stainless steel, chromium plated or stainless steel with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as spd and directed.
S & F in repairs CP shower rose 125mm dia alongwith shower arm of suitable length complete all as specified and directed.
S&F in repair CP soap dish brass chromium plated, of approximate size 100 x 80mm, complete all as specified and directed.
S&F in repair 150 mm square CP grating with openable flap (Min weight 100 gms) complete all as specified and directed
S&F for corner glass shelf assembly consisting of 5.50mm thick sheet glass shelf of size 30 x 30 cm with chromium plated railing complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore CP Angle valve with wall flange, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S&F in repair 15 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S & F for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
S&F in repair 1000 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.
S&F in repair 500 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.
S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
S&F in repairs kitchen sink with drainage board made out of stainless steel 1mm thick with plugs, washers including bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets of angle iron of size 25 x 3 mm & length as directed and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.
S&F in repair stainless steel plate rack of size 750x900x230mm fixed to wall complete all as specified and directed.
S & F 18mm thick Celuka ply of grade 1 quality of one side pre laminated and other side plain white colour to make kitchen cabinet / drawer shutters complete all as specified and directed.
S&F Continuous (piano) Stainless steel hinges width of flaps (when open) in 40mm, complete all as specified and directed.
S & F stainless steel 40mm dia decorative knob for kitchen cup board complete all as specified and directed.
S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.
S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.
S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.
S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.
S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) size n. exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.
Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed.
M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.
S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as per specified and directed.
S&F for 35 mm thick factory made solid panel PVC wire gauzed door shutter 30 mm thick i.e. panel will be of wire gauze of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of plain colour PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of size 10mm x 10mm used beading of exposed portion of PVC sheet beading channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including fixing with 100mm long stainless steel butt hinges -04Nos complete all as specified and directed.
S&F for 200mm long brass tower bolt complete all as specified and directed.
S&F for 150mm long brass handle, oval type, stove enamelled complete all as specified and directed.
S&F for 100mm long bright finished brass mortice latch and lock 6 levers with and pair of lever handles of approved quality with necessary screws, complete all as specified and directed
S&F for 300mm long brass sliding door bolt complete all as specified and directed.
S&F for 150mm long brass floor door stopper complete all as specified and directed.
S & F Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm wooden grain printed PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.
S & F for factory made solid PVC moulded door shutter 28 to 30mm thick (styles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet on the front face & 2mm prelam PVC sheet on bach face at site as per specification & drawing complete all as specified and directed.
S&F for 75mm long stainless steel Butt hinges complete all as specified and directed.
S&F for 150mm long aluminium tower bolt complete all as specified and directed.
S&F for 100mm long aliminium handle, oval type, stove enamelled complete all as specified and directed.
S&F for 250mm long aluminium sliding door bolt complete all as specified and directed.
S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290 complete all as specified and directed.
S&F for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.
S & F factory made UPVC white colour three track three panels sliding window with fly proof SS wire mesh(Two nos glazed & one no wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 (+ or -) 2mm and single glazing bead/double glazing beads of appropriate dimension. (area of window above 1.75Sqm ) comprising of UPVC multichambered frame, with in built roller track and sash extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing bead sand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and incl 4mm thick cooling glass and stainless steel wire mesh of approved quality complete all as specified and directed.
S & F factory made UPVC white colour two track two panels sliding laed window up to 1.50m height made of (small series) frame 52 x44mm & sash 32 x 60mm both having wall thickness of 2.3 (+ or -) 2mm and single glazing bead/double glazing beads of appropriate dimension. (area of window above 1.75Sqm ) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beadsand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of incl 4mm thick cooling glass of approved quality, complete all as specified and directed.
S & F factory made UPVC white colour casement window single panel with SS friction hinges (300 x 19 x 19mm), made of (small series ) frame 47 x 50mm & sash 47 x 68mm both having wall thickness of 1.9 (+ or -) 2mm and single glass pane glazing beads of appropriate dimension. (area of window upto0.75Sqm) comprising of uPVC multichambered frame, sash and mullion( where ever required) extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beadsand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and incl 4mm thick cooling glass and stainless steel wire mesh of approved quality, complete all as specified and directed.
S & F for aluminium anodised powder coated grill with wire mesh of size 75mm and aluminium bar 6mm XPM type including all accessories such as channels for fixing grill screws etc. Aluminium section 15 micron thick anodizing complete all as specified and directed.
S& F for aluminium anodised powder coated frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S & F for aluminium anodised powder coated door shutters, Aluminium section weight of 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, tower bolt -02Nos, handle 2 Nos, Door stoper -01 in each door, hinges anodised aluminium snap beading screws etc complete all as specified and dircted.
S& F for mortice lock, vertical type of size 100mm with mild steel body 4 lever complete all as specified and directed.
S&F for aluminium (extruded section) door closer hydraulically regulated, designation No. 3, universal type suitable for door shutters of 851 to 1200mm in width and weight between 61 to 80 kg and fixed complete all as specified and directed.
S& F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aliminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S & F for 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, for door complete all as specified and directed.
S & F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F for 3.0 mm thick Figured glass, pin headed type and glazing with oil putty in squares size not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.
M & L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of stress over 10 cm width or girth, not otherwise described complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of old steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.
Taking down wooden roof trusses, coupled rafters or trussed beams above 4 mtr upto 8 mtrs complete all as specified and directed.
Dismantling timber scantling 40 Sq cm and over in section, in any position complete all as specified and directed.
Dismantling timber scantling, fillets, rails, posts, rafters, purlins etc. under 40Sq cm in section, in any position complete all as specified and directed.
S&F rolled MS Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified and directed.
Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof covering complete all as specified and directed.
S&F for Plate (plane or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe- 410-W complete all as specified and directed.
S&F of mild steel screw bolts of diameter of neck 16 to 20 mm (machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 22.5 cm and n exc 30 cm long complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wall and ceiling boards( fibre pulp, insulation etc.) or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall complete all as specified and directed.
S & F solid PVC wall lining consisting of 5mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and complete all as specified and directed.
S & F Gl frame work grid of size 605 x 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre complete all as specified and directed.
M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed
All as per item No 147 above except 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber / GI / aluminium frame complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed
M&L for treatment of voids in masonry with using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing floors complete all as specified and directed.
M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed
M & L for cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) in CM 1:4 built in cement mortar complete all as specified and directed.
M&L for Boring holes through granite cooking platform lining for pipes ,etc n'exc 50mm dia and making good complete all as specified and directed.
M&L for earth work in excavation by mechanical means(Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m. and getting out in soft/loose soil complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm bore of pipe complete all as specified and directed
M&L for 150 mm dia SGSW drain pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed.
M&L PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified and directed
M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
M&L for providing pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover (for manholes and drains) including necessary form work set in CM 1:6 with and including demolition complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately)
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.
M&L Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.
M&L RCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.
Use & Waste for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and directed.
Use & Waste for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces of concrete complete all as specified and directed.
Taking down and refixing of Glass bathing cubical with door incuding all fittings etc. complete all as specified and directed.
Taking down and refixing of Aluminium partition and door incuding all fittings etc. complete all as specified and directed.
S & F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required ) and fitting the same with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangements complete all as specified and dfirected.
M & L for Mirror polishing on marble/granite/kota stone/stone work where ever required to give high glosy finish complete all as specified and directed.
Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.
M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, to be terminated in and excluding modular metal GI flush box and its cover plates for fixing modular type switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.
All as per item No-170 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the same board with other switches complete all as specified & directed.
All as per item No-170 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.
All as per item No-170 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the Independent board with other switches complete all as specified & directed.
All as per item No-170 here in before but point wiring for one six pin socket outlet 15 & 5 amps (independent) controlled by one modular switch using PVC FRLS cable of size 2.5 sqmm complete all as specified & directed. NOTE-For item No 170 to 174 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)
Supply and fixing modular metal GI flush box 1/2 module as per site requirement suitable for 20mm dia conduit with and fixed on walls in CM 1:4 and making good the disturbed surfaces of walls as per existing complete all as specified and directed.
All as above item No -175 but modular metal flush box of 3 module complete all as specified and directed.
All as above item No -175 but modular metal flush box of 4 module complete all as specified and directed.
All as above item No -175 but modular metal flush box of 6 module complete all as specified and directed.
All as above item No -175 but modular metal flush box of 12 module complete all as specified and directed.
Supply and fix modular white cover plate with frame 1 module for mounting modular switches,sockets and regulators etc complete all as specified and directed.
All as per above item No-180 But modular white cover plate with frame 2 module complete all as specified and directed.
All as per above item No-180 But modular white cover plate with frame 3 module complete all as specified and directed.
All as per above item No-180 But modular white cover plate with frame 4/5 module complete all as specified and directed.
All as per above item No-180 But modular white cover plate with frame 6 module complete all as specified and directed.
All as per above item No-180 But modular white cover plate with frame 2x 6 module complete all as specified and directed.
Supply and fix switch modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.
Supply and fix bell push modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.
Supply and fix socket outlet, 6 Amps, modular type, 2 module 230 volts complete all as specified and directed.
Supply and fix switch modular type, single pole, 16 Amps one module,one way 230 volts complete all as specified and directed.
Supply and fix socket outlet, 6/16 Amps, modular type, 2 module 230 volts complete all as specified and directed.
Supply & fix rotory stepped type electronic fan regulator modular type,Single module 120 watt 230 Volts complete all as specified & directed.
S&F for ceiling rose surface bakelite 50 x 25 mm size 3 terminals complete all as specified and directed.
Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed.
Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified & directed.
Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed.
Supply & fix commiosnig and testing of complete power cum starter unit compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overload protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed.
Supply & fix in renewal single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts IK-08 As per IEC 61439-3 complete all as specified & directed.
S&F for LED Batten surface/wall mounted of capacity 20/22 watt with specially designed powder coated aluminium housing,high optically efficient polycarbonate diffuser,in built electronic driver duly wired up to terminal block,power consumption<22W,luminaire lumen >2000 lm,system efficiency of >120 lumens/W,LED make Nichia/Cree/Everlite/Eclison/Osram/lumiled,with LED binning as per ANSI Bin C78.377A,photo biological safety report as per IEC 624718& electrical insulation class 1 Ingress protection IP 20,clor rendering index CRI> 80 ,temp range 0 to 450 C ,driver efficiency >85% Power factor >0.9 THD <20% as per IEC 61000-3-2 ,color temp -6500K,Surge protection 2.5 KV,50000 burning hrs (min) as per L7O criteria,two stages isolated constant current operated driver with range 150-270 V AC and safety extra low voltage safe level< 60 V DC as per IEC standard with LM70 & LM 80 certification complete all as specified and directed.
S&F for 2 ft x 2 ft recess mounted full panel LED luminaire of capacity 35/36 watt with white powder coted housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser, in built electronic driver duly wired upto terminal block, power consumption< 35 W, luminaire lumen > 3500lm and system efficiency > 120lm/w, CRI> 80, LED Make :- Nichia/Cree/Osram/Lumined with LED binning as per ANSI Bin C78.377A, Photo biological safety report as per IEC624718 & electrical insulation class 1 , colour temp- 5700k, Ingress protection IP20, Driver efficiency > 85% , 50000 burning hours (min) as per L70 criteria, ambient temp 0 to 500C, power factor > 0.95 THD <10%, surge protectionin CM-3KV, two stage isolated constant current operated driver with range 150-270V AC and safety extraa low voltage safe level < 60V DC as per IEC standard, with LM79 & LM80 certification complete all as specified and directed.
S&F for LED security of capacity 36/40 watt with aluminum pressure die cast housing, high purity PC fresneldiffuser with silicon gaskets for IP-65 protection, power consumption < 35 W and system efficiency > 100lm /W, in built electronic driver prewired upto terminal block with driver efficiency > 85% power factor > 0.95, suitable for external pole upto 35mm LED Make :- Nichia/Cree/Osram, CRI > 70, ambient temprature range 0-450c, THD<10%, colour tempreature 5700K, surge protectionin cm 3.5KV 50000burning hour as per L70 criteria, multistage constant current constant voltage operated driver with range 150 -270 V AC and safety extra low volatge safe level < 60V DC as per IEC standard including GI pipe medium grade ISI mark of size 32 mm dia length not less than 1.5 mtrs bending to shape for fixing light and nuts, bolts, clamp as required to fix to wall complete all as specified and directed.
S&F for mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 15 Watt LED warm white in colour with a nominal system output of 120 lum/watt(min) with PF not less than 0.9 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F for LED light fitting 1x9 W/1X10 W bulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable, power consumption < 10 W and system efficiency > 100lm /W, of suitable size. and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.
Supply & fix NEW GENERATION POST TOP energy saving envirmental friendly long life 35 watt LED luminaire light fitting, IP 65 protection with reflector cover electronic driver, connector block etc with internally prewired fixed to brcket on gate with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.
Supply & fix in renewal surface round mounting type 12/15 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.
Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light warm yellow in colour with a nominal system output of 120 lum/watt(min) with PF not less than 0.9 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply & fix in renewal, surface square mounting type 12 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.
Supply and fixing bed side LED lights fitting 1x 6W, 220V with driver, holder including LED tube light warm white in colour with a nominal system output of 100 lum/watt(min) with PF not less than 0.9 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified and directed.
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.
Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces complete all as specified and directed.
Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 200 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .
Supply and fix MCB DB 4 way sheet metal enclosure triple pole and neutral 415 volts with 100 Amp standard copper bus bar IP-43, IK-09 with metal doors of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mouting type double door factory fabricated complete as per IEC 61439-3 without MCB but with enclosue blank plate complete all as specified and directed .
Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed.
Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 4 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed.
Supply and fix MCCB 4 pole 100 to 125 Amp Icu 16 Kilo Amp and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release suitable for fixing in VTPN DB complete all as specified and directed.
Supply & fix Isolator TPN, 4 Pole, 415 Volts, 50 Hz AC Supply , 100 Amps, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed.
Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.
Supply & fix MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.
Supply & fix MCB SP, 2 to 4 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. (for light circuit)
Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. (for equipment & power circuit)
M & L earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 complete all as specified and directed.
M&L for electrically disconnecting and taking down existing ceiling / Exhaust fans from any hight or in any position from existing bldg and keeping in safe custody for reuse at site after necessary repare/ servicing & painting with one coat of synthetic enable paint and re hanging/ re-fixing in original position but including renewal of three cor flexible copper conductor cable from ceiling rose to fan connector block of soze 0.75 Sqmm and hanging fan clamps, nuts, bolts and rubber reel bush etc & testing for proper functioning complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with fiber glass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser complete all as specified and directed
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including connecting from ceiling rose to fan connector complete all as specified and directed.
Supply and fix ceiling fan, 1200mm sweep, minimum 220 CFM, 230 V, BEE 5 star rated, BLDC (brushless direct current motor ) type complete with standard accessories i.e (three blade, 02 Nos canopy, electronic type modular fan regulator 90 to 100 W, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound with synchronous motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed.
Supply laying, commisioning & testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.
Supply laying, commisioning & testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3½ core complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed.
Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed.
M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as specified and directed.
Supply and fixing in renewal GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed.
Sree Ram Enterprises
M/s M S Sharma and Co.
C P Singh and Co
M/S DEVENDRA KUMAR GUPTA
deva engineers
M/S J J ENTERPRISES
Krishna Constructions
Asha Construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .