Punjab

Financial Eval

Works

Electrical Works

Supply Installation Testing and Commissioning of 82.5 KVA DG set in Agriculture Co Op Staff Training Institute Jalandhar

CE-PWD(B and R)

Jalandhar, Punjab

Amount: ₹16.8 LCloses: 9 Apr 2026Closed

Bids

Percentage

3 Bids4 Jun 2026

#	Company	Amount	Rank	Status
1	L1₹15.4 LAccepted-Finance 21238 GONIANA ROAD NEAR OLD BUS STAND BATHINDA PUNJAB 151001 UDYAM PB 03 0004490 03AAQFG9259D1Z7 R M \| BATHINDA \| PUNJAB \| 151001	₹15.4 L	L1	Accepted-Finance First Lowest
2	L2₹15.6 LRejected-Finance 80 P RAILWAY ROAD FEROZEPUR CITY \| FEROZEPUR CITY \| PUNJAB	₹15.6 L	L2	Rejected-Finance Second Lowest
3	L3₹16.5 LRejected-Finance	₹16.5 L	L3	Rejected-Finance Third Lowest

Tender Value

₹16.8 L

EMD Value

₹33,523

Closing Date

9 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer

Address

Electrical Division PWD B and R Jalandhar

Work Description

Supply Installation Testing and Commissioning of 82.5 KVA DG set in Agriculture Co Op Staff Training Institute Jalandhar

Tender Information

Tender ID

2026_CEPW_164491_1

Reference Number

39 dt. 24.03.2026

Tender Type

Open Tender

Product Category

Electrical Works

Location

Jalandhar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

20 documents required · 20 mandatory

Fee/PreQual/Technical

RequiredTender fee (.pdf)

RequiredEarnest Money (.pdf)

RequiredFormat 2 8 Affidavit Undertaking (.pdf)

RequiredFormat 2 9 Undertaking regarding investment undertaking that the bidder will be able to invest a min (.pdf)

RequiredCopy of the valid enlistment with Punjab PWD Branch under appropriate Class and Category of work (.pdf)

RequiredCopy of Permanent Account Number PAN issued by Income Tax Department (.pdf)

RequiredGST registration Number issued by concerned department (.pdf)

RequiredUndertaking of Bid Validity 120 days (.pdf)

RequiredAffidavit Undertaking of not having been black listed by any Govt Semi Govt Organization Corporation (.pdf)

RequiredAffidavit Undertaking that information being submitted is correct and time and that any false inform (.pdf)

RequiredDetails of his available bid capacity with an undertaking that his available bid capacity calculated (.pdf)

RequiredLicense of A Class Contractor (.pdf)

RequiredGeneral Information (Format 1.1) (.pdf)

RequiredAnnual Turnover Certificate from C.A. Format 2.1 (.pdf)

RequiredWork Completion Cerificate format 2.2 (.pdf)

RequiredAvaialibity of Personnel Format 2.5 (.pdf)

RequiredCurrent Contract Commitments/ works in progress FORMAT (2.7) (.pdf)

RequiredRegistration of EPF (.pdf)

Finance

RequiredBOQ (.xls)

RequiredForm of Bid section 8 (.pdf)

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹33,523

Important Dates

Last Activity

4 Jun 2026

Published

25 Mar 2026

Bid Opening

9 Apr 2026

Download Starts

25 Mar 2026

Download Ends

9 Apr 2026

Submission Starts

25 Mar 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (0 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply , Erection, Testing and Commissioning of Silent (Sound Proof) Diesel Generator Set 82.5 KVA /66KW with Manual Control Panel. It should be air cooled/water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing 101.3 BHP (min.) for giving a power rating as per ISO 8528-Part-1 (With CPCB-IV Norms as amended upto date) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ISO 3046/BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/ electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level suitable self-starter for 12 V/24 V DC, battery charging alternator unit and voltage regulator, Lubrication oil cooler, Lubrication oil filters with replaceable elements.
2ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication, Engine Hours indications, Over speed indication, High water temperature indication. Lubricant oil pressure indication,) RPM indication and MCCB (Fixed Thermal and Adjustable Thermal protection) of suitable rating for outgoing supply. ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34) standard. Rated Power Factor: 0.8 (lag), Rated voltage: 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation: Self ventilated air cooled Altemator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use.
3ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack. The acoustic lining should be made up of high quality insulation material i.e. Rockwool/glass/mineral wool/ PU foam of appropriate thickness & density for sound absorption. The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc. with 2 year warranty from the date of installation. Complete in all respect as desired by engineer at site:-The Generator set should be installed at site on the suitable size existing plinth of RCC as per specifacation DG set as per satisfaction of the Engineer-in-Charge at site. The model of engine will be decided by the Engineer in Charge.
4MANUAL CONTROL PANEL: Manual control panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shortcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH METER, Ammeter, Frequency meter, battery charger complete in all respect as desired at site:- FOUNDATION: Foundation of required size Complete in all respect as desired by the engineer incharge at site.
5XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
6Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
7Overall size 95sq.mm (3½ Core) Un-armoured (Loose)
8Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
9Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
10COPPER EARTHING (Upto 14 metre in Length):

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.94 MB

Work Item Documents

BOQ_333229.xls

BOQ • 0.27 MB

Additionalcondition.pdf

Additional Documents • 5.43 MB

SBD.pdf

Tender Documents • 15.48 MB

Ready to Participate?

Download all tender documents and submit your bid