REPAIR TO PLASTER, ROOF CEILING, TILING JOINERY AND

Amount

M&L cement concrete 1:2:4 type B1 1:2:4 type B1 (20mm graded stone aggregate) as in 50mm thick padding concrete in sunken floor mixed with liquid water proofing compound 200ml in 50Kg cement complete WPC shall be measured ad paid separately.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 03 here-in-before but except bricks -ditto-

S&F 2nd class hardwood plain, solid, straight as in purlin rafter complete all as specified and directed.

S&F glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with Particle board core and plywood facepanels, commercial type on both sides, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

All as per Srl item No 09 here-in-before exc 1.5 sqm but n.exc 4.00 Sqm

Taking down aluminium door/window shutters, disconnecting members, rescrewing the members for easy movement of shutter and refixing in the same opening complete all as specified and directed.

Taking down PVC door/window shutters, disconnecting members, rescrewing the members for easy movement of shutter and refixing in the same opening complete all as specified and directed.

S&F in repairs for peg stay 300mm for steel window with screws complete all as specified and directed

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 156 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&Fanodised aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

Supplied and fixed steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F in repair 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F in repair butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F 125mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F in repair 125mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F butt hinges of 100 mm size, stainless steel complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), clamps; hold fasts; wall ties; hooks for hanging fans, small articles including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

S&F anodised aluminium snap grid frame work for size of grid 605x605 mmfor false ceiling complete all as specified and directed.

Applying a coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm each coat including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weight 3.6 kg / sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt no tless than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed.

Dismantling of manglore pattern roofing tiles any description single/ double layers with ceiling tiles complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M&L for backing coat 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

------------BLANK------------------

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed. Make : Everest, Charminar, UPAL.

M&L for 16-20 mm thick machine cut Kota stone slabs of size 540 mm x 540 to 560mmx 560mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the stone slabs complete all as specified and directed.

M&L for 16-20 mm thick machine cut Kota stone on vertical surfaces,skirting etc set& jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M&L for providing coloured designer cheqeured tiling, exterior grade (ENDURA or equivalent as approved by GE) 20 mm thick set, jointed & pointed in neat cement slurry with gray cement and pigment to match shade / colour / matrix of tiles in floors complete all as specified and directed.

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11sqm but n.exc 0.18 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (square / rectangular) area of each tiles not exc 0.36 sqm and n.exc 0.42 Sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry complete all as specified and directed".

All as per item No 53 here-in-before but on vertical surfaces

M&L for Glazed ceramic tiles coloured 300mmx 450mm X 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry complete all as specified and and directed

M&L for granite (of any type) tiles 20mm thick perfect black machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles laid over compacted sub soil in flooring complete all as specified and directed.

M&L in repair for laying 80 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles laid over compacted sub soil in flooring complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:3 on ceiling / chajja / beams of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for flush pointing to brick walls in CM 1:3 complete all as specified and directed.

M&L 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on cement screed complete all as specified and directed

M&L for Bitumastic gola, with 85/25 bitmen and coarse sand mixture, 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of oil emulsion distemper complete all as specified and directed

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of white lime washing complete all as specified and directed

M&L for preparing the old plastered surfaces and applying one coats of cement base paint on walls / vertical surfaces complete all as specified and direcrted.

M&L for complete removal of existing treatment and preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc complete all as specified and directed

M&L for preparing of newly decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying two coats of cement base paint, over one coat of primer complete all as specified and directed

M&L for applying 3mm thick one coat of JK / Birla white wall care putty , finished even including preparation of surfaces of walls including hacking out old treatment complete all as specified and directed

M&L for applying one coats of exterior paint acrylic emulsion including preparation of old plastered surfaces of walls complete all as specified and directed. Make :- Apex Ultima (Asian paints / Excel /Nerolac) / weather shield (ICI paints).

M&L for applying one coat of JK / Birla white wall care putty , finished even and smooth on wall and applying two coats of exterior paint acrylic emulsion over a coat of primer including preparation of old plastered surfaces of walls complete all as specified and directed.

M&L for applying two coats of plastic emulsion paint over a priming paints plaster coat including preparation of old plastered surfaces of walls complete all as specified and directed.

M&L for applying one coats of plastic emulsion paint including preparation of old plastered surfaces of walls complete all as specified and directed.

M&L for taking down heavy duty steel gate from Magzines care fully area of each leaf exc 5 sqm and weight of each leaf appx 550 kg and refixing in the same opening by repair / replacement of pintel hinges, sliding roller, necessayr guiding ralls, etc all as specified and Engineer-in-Charge

Taking down existing roof treatment of APP membrane and by demolition of cement concrete as on roof complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 in cm width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed .

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection complete all as secified and directed

Taking down GI tubing and connection including removing to store of 25 or 32 mm dia complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 25 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

M&L for 1mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltr complete all as specified and directed

S&F for repair 32mm dia wash hand basin waste pipe plaint size 32x 800mm complete all as specified and directed

S&F for repair 40mm dia urinal waste pipe plaint size 40x 800mm complete all as specified and directed

S&F in repair internal syphone kit (complete all fitting) for PVC low level flushing cistern complete all as specified and directed

S&F in repair PVC flushing cistern handle / knob complete all as specified and directed

S&F in repair PVC flushing cistern float valve complete all as specified and directed

Supplied, hoisted and fixed in repair position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity complete all as specified and directed.

Supplied, hoisted and fixed in repair position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity complete all as specified and directed.

S&F in repairs 15mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms Make - 'Prayag' / Polytuff complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia and fixed complete all as specified and directed.

Supplied & fixed in repair stop valves, 15mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied & fixed in repair stop valves, 20 mm bore dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied & fixed in repair stop valves, 25 mm bore dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repair angular valve, 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down,high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed in repairs set of 05 mm thick glass corner shelf set of 3 Nos ( size 200 mm,250mm & 300 mm) Make -plumber cat part No U-0921,922,923 or equivalent as approved by GE complete all as specified and directed

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or brass ferrule of 15 mm bore and fixed (Minimum weight 90 gms complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. complete all as specified and directed.

Cleaning of water tanks of capacity exceeding 500 tr and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from outh of circulating pipe etc complete all as specified and directed

S&F in repairs stop cock standard of PTMT any colour high pressure screwed for iron pipe or brass ferrule of 15 mm bore and fixed (Minimum weight 90 gms complete all as specified and directed.

S&F in repairs angle cock standard of PTMT any colour high pressure screwed for iron pipe or brass ferrule of 15 mm bore and fixed (Minimum weight 90 gms complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint laid in trenches/under floor complete all as specified and directed.

Supplied and fixed in repair UPVC (SWR) floor trap 75 mm bore complete all as specified and directed

Supplied and fixed in repair PVC (SWR) gully trap 125/100 mm bore setting and jointing with solvent cement complete all as specified and directed

S&F PTMT tower bolts 200mm size fixed with machine screws, Make : Symit

S&F PTMT Bow Handles 150mm size fixed with machine screws, Make : Symit

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

All as per item No 125 here-in-before but taking down refixing in the same situation

S&F in repair chromium plated fency pillar tape 15 mm dia complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & tcincluding PVC P Trap, etc complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Supplied and fixed in repair 125 mm size brass chormium plated shower roses with or without swivel joints including fixing to steel pipe or union 15mm bore complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition and breaking up drain pipes ( SGSW, AC or reinforced concrete) or PVC pipe set in cement mortar for 75mm / 100mm / 110mm internal dia of pipe and including removal from the site complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Dismantling of timber scantling framed work 40sqcm and over in section in any position complete complete all as specified and directed.

Supplied and fixed 6mm thick non asbestos corrugated roof sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

S&F steel window handles, peg stays & Hinges etc (including welding if required) complete all as specified and directed.

S&F in repairs PVC Bath cabinet with mirror 18" x 22" x 4.25". Make : commander, Prayag or equivalent

jitendra AND Co

veer enterprises

M/S AMAR ELEKTRO CENTRE

M/S Rohit Enterprises

M/S GEETANJALI ENTERPRISES

R K Enterprises