PROVN OF CERTAIN MINOR WORKS UNDER GE AF TECH AREA AT AF STATION AGRA

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M & L for glazed ceramic coloured tiles joint free of size 350x250 x 7 /450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns hooking ends and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required, including cranking, bending, spirally for hooping for columns hooking ends and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC M- 25 design Mix using 20 mm graded stone aggregates for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use & waste of formwork to soffits of suspended slabs such as roof slab, floor slabs, landinds and similar work , not exceedind 200mm thick(horizontal and sloping)complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying Two coat distemper oil emulsion as on wall surface complete all as specified and directed.

Providing & fixing false ceiling at any heights with sound proof fibre fully perforated With complete With fully Reinforced Gypsum false ceiling tiles of perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 10mm content less than 2%, humidity resistanceedged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners(Sleek) of size 15 x 32 mm of length 3000mm,cross-T(sleek) of size 15x 32mm of length 1200mm and secondary intermediate cross-T(sleek) of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1500 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including dismantling of old ceiling of any type. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.

Demolition of brick work masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified & directed by Engr-in-charge

S & F rolled mild steel framed work as in doors or gates / rumblar/truss of angle or other section with gusset plate , rails bracess etc, drilling for fixing of steel sheets or other covering including distance pieces work confirming to Fe- 410-W (Gde -E-250) quality A complete all as specified and as directed.

M&L for any thickness cement concrete 1:2:4 type B-I, (using 20mm graded stone aggregate) as in hold fast kerb, haunching, coping etc. complete all as specified and as directed

M & L for prepararing new Steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paint complete all as specified and directed.

S&F factory made security steel door/ safety door thickness not less than 70mm, made a mild steel with accessories of best quality steel used(fastener& lock body & cap and lever handle) etc all complete all as specified and directed. Note:- Make TATA Steel or equivalent as approved by Engr-in-charge.

S&F iron lock for security door of 12 lever 7 inch keys with 1 pair of best quality including all connected necessary accessories etc all complete all as specified and directed.

Cutting out the vegetation like shrubs, plants and bushes of any description upto 1.5m width and taking out roots from the wall or roofs complete all as specified & directed by Engr-in-charge.

M&L brick work with sub class 'B' bricks (using old size bricks), straight or curved on plan, exc 6m mean radius, built in cement mortar (1:6) complete all as specified & directed by Engr-in-charge

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed

M&L for rendering 10 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface complete all as specified and as directed

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces mixed with WPC @ 3% by weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured & paid seperately.

M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion white or tinted,incl repair of holes and cracks complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge

M&L for preparation of old decorated surfaces after complete removal of existing treatment of wall and applying two coats of weather proof exterior emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces by complete removal of existing treatment of plastered or un-plastered surfaces of ceiling and applying two coats of white wash including preparation of surface complete all as specified and directed.

Dismantling PVC water tanks and refixing the same of capacity exc 500 ltrs but n. exc 1000 ltrs with and including all new fittings and fixtures complete all as specified and as directed by Engr-in-charge.

M&L gunniting to RCC works in column ,beams, slabs, landing, balconies etc by removing loose concrete including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand/grit blasting and supply and fixing welded steel wire mesh 75mm x 75mm with 3mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sika. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade over wherever required complete all as specified. Note:- (i) After placing the additionnal reinforcement all concrete surface shall be throughly scrubbing with brushed washed with water and allow dry and plaster complete all as specified. (ii) Work to be carried out as in patches as directed by Engr-in-charge. (iii) Rate for scaffolding ,15mm thick plaster in CM 1:4 and TMT bars (where applicable) deemed to be included in quoated rate. (iv) preparation of surface and applying two coat of exterior emulsion paint with one coat of primer deemed to be included in this item.

Dismantling of existing roof treatment of any type description incuding tarfelt/cement plaster etc from roof surfaces including cleaning the surface and removing the debris from site complete all as specified & directed.

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning grouting with cement and sand slurry 1:3 complete all as specified & directed.

M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggegate) (average 50 mm thickness) as in levelling course / padding over roof complete all as spd and directed.

M&L for rendering or bedding layer 15mm thick in cement mortar 1:4 on concrete surfaces with WPC, finished even and fair with out using extra cement complete as in roof. (WPC shall be measured & paid seperately.

Supply only water proofing compound (ISI Marked).

M&L for cleaning surfaces and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm including cleaning surface complete all as specified & directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and as directed.

M&L Cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed; laid over 20 mm thick screed beding in cement mortar (1:4) , set jointed and pointed in neat cement slurry in floors, and cut and polished etc with grey cement and no pigment complete all as specified and as directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns,stanchions and blocks with fair finished polygon surface complete all as specified

M&L for preparation of new concrete surfaces and applying two coats of exterior emulsion paint with one coat of primer in normal pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge.

M&L for mild steel Framed work such as ladder, grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete as specified & directed.

M&L for Providing & fixing false ceiling at any heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 10mm content less than 2%, humidity resistanceedged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners(Sleek) of size 15 x 32 mm of length 3000mm,cross-T(sleek) of size 15x 32mm of length 1200mm and secondary intermediate cross-T(sleek) of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1500 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including dismantling of old ceiling of any type. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.

S&F Aluminium Partition wall of section as in frame size 63.5 X 38.1 x 1.0mm thick incl 5mm thick Glass / 12mm thick prelaminated particle board paneling including MS Channel ( Size of panel n.exc 1.5 Sqm each ) and all necessary fittings with and including taking out old partition wall frame including accessories complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles light shade(1st quality/premium quality) 8-10 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified and directed .

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion on wall by using mechanical device over a coat of 1mm thick wall care putty all as specified and directed.

M&L for preparation of new plastered surface of ceiling applying three coat of white wash by using mechanical device complete all as specified and as directed

Supply and lowering submersible pump set of capacity 1.5 HP, single phase,50 Hz, 70 LPM at 57 Mtr Head, delivery size 32mm, stage 13 complete all as specified and directed. Make- kirloskar / Crompton/KSB

S&F wall mounted cubical type panel board with locking arrangement and comprising of starter, capacitor, volt meter, indicator lamp, Amp meter & MCB/cut out of capacity suitable for upto 2.0 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed.

M & L for 2 Nos MS clamp made out of 40mmx 6 mm thick FI for holding of 32 mm dia column pipe complete with suitable size 02 Nos nut, bolt & washers complete all as specified and directed

M& L for well cap for 150 mm dia duly made out of 4 mm thick MS plate including making provision for passing GI column pipe of 32 mm dia complete all as specified and directed by Engineer-in-charge.

Supply & lowering in bore well 32mm bore high density polyethlene (CPVC) column pipe socketed type of pressure rating 6Kg/cm2 with & including all necessary fixing/ jointing accessories complete all as specified and directed. Make- Ashirvad/Kishan/ Astral

M&L for boring/drilling in any type of strata upto 100 mtr of 175 mm dia by any means including developing bore, flushing up to coming of clean water etc all as specified and directed.

Supply & lowering PVC pipe 150 mm dia (6") ISI mark 6 Kg/cm² pressure (Heavy duty) Plain/slotted all as specified and directed.

M&L for pea gravel of suitable size for borewell to be filled around casing pipe of borewell complete all as specified and directed

Supply and laying or fixing or passing in well/ borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 2.5sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.

Supply, laying, testing GI tubing medium grade fixed to wall, ceiling, floor including required GI fitting complete all as specified and directed for the following bore :-

40 mm bore

25 mm bore

20 mm bore

Supply & fixing gun metal globe gate valve with iron wheel head, screwed both ends ISI mark for the following sizes all as specified & directed :-

40 mm bore

25 mm bore

M&L PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in surface,chanells and drains complete all as spciified and directed

Supply and install testing and commissioning hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating inverter type and EER 3.2 of capacity 2.0 TR including installation kit as per OEM ie. 2.5 sqm 4 core coper cable, Copper tube 1/2" dia and 1/4" dia minimum 10 feet long for connection from indoor to outdoor unit complete all as specified and directed. Make O general/ Hitachi/ Daikin

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

S&F DB enclosures with MCB protected suitable for AC including socket plug top and MCB single pole with a two pin and earth plug and socket complete 20 Amp MCB ,240 volts making good disturbed surfaces to match with existing surfaces etc complete all as directed. Make Havells model No DBOXx MCB Protected/legrand/ Indo Asian

M&L for sub main wiring along with earth wire of FR PVC insulated copper conducter , single core cable in surface of size2x4 Sqmm plus 1x4 Sqmm earth wire in and incl suitable size of PVC conduit not less than 20mm dia , ISI marked incld necessary fittings and fixing arrangement complete all as specified and directed.

M&L for Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and module complete all as specified and directed.

S&F addressable type multisensor detector with heat and smoke combination Complying with and type certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed.

S&F Fire Alarm hooters / Sirens electronic type horizontal two stage continous normal operation for atleast 50 minutes with sound level 65 db to 120 db Measured at 1.5m with sound output Variation of + 5db, 1000m range. For warning of fire connected with central control panel installed in each zone inside the rooms complete all as specified and directed.

Supply and fix Addressable manual call point resettable type complete all as specified and directed.

S&F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. of external dia 20mm complete all as specified and directed.

S&Fixing rigid non metalic PVC Junction boxes (1 to 4 way) for 20MM external dia pipe complete all as specified and directed.

Supply and drawing of PVC insulated FRLS single core multi stranded copper conductor cable (ISI Marked) of 1.5 Sqmm size drawn in to conducit complete all as specified and directed.

Supply and laying the FRLS armoured with steel wire or strip fire alarm control cable PVC sheathed copper conductor of size 1.5 sqmm 2 core complete all as specified and directed.

M&L for double compression stainless steel gland for fixing armoured cable in panel of size up to 6 sqmm 2 core complete all as specified and directed.

Supply and fix Exhaust Fan PVC body AC single phase 230mm sweep with blades, frame and louvers complete all as specified and directed. Make Havells/Bajaj/Crompton or equivalent.

M&L for point wiring for One light/fan/exhaust fan point controlled by one way 5 Amp switch complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed: -

All as per srl item no. 73 above but for 3/5 pin socket outlet for 5 Amps on independent board with 1.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor complete all as specified & directed.

S&F ceiling recessed mounting 2x2 LED panel square type, complete of capacity 36 watt including connecting wire from celing rose to light fittings compelet all as specified and directed. (i)Make-Crompton, Model-LCTLRE36FOCDL / Orient, Model- LTSAQ-36-C-VO / Jaquar, model-LULTSLS036XC as approved.

M&L for taking down carefully existing ceiling fan/exhaust fan/wall fan from site and deposite to MES store complete all as specified and directed.

Supply & fix wall mounted fans 400mm sweep 230 Volt 1450 RPM powerfull air circulation motor for continuous with high air delivery low Noice complete with accessories all as specified & directed

Supply & fix socket outlet 2 in 1, 3 pin 5/6 Amps, flush universal type complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" series and making connections complete all as specified & directed.

Supply and fixed MCB SPN 40 to 63 Amp 240V, 'C' series 10 KA, complete all as specified and directed.

S&F in repair factory made sheet metal enclosure MCB DB 240 volts, 4 ways with 200A rated bus bar, SPN, double door type IP43 suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6 sqmm drawn in and including PVC rigid conduit not less than 20mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 6 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 6 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for earthing in renewal of complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron wire of size 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete all as specified an directed.

M&L for provision of flame proof sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm drawn in and including steel conduit not less than 20mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 4sqmm cable & one run of 4 sqmm cable alongwith steel conduit including its accessories shall be measured and paid one unit length.

Supply & fix switch piano, flush type single pole, one way 15/ 16 Amps, 240 volts complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush universal type complete all as specified & directed.

Supply and fix electric water heater geyser, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 STAR rated complete with all accessories such as safety valve, thermostate, NRV, cconnection pipe etccomplete all as specified & directed.

S&F Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore complete all as specified and directed by engr-in-charge

Supply and laying of CPVC pipe of outer dia 16mm SDR 11 and plain CPVC SDR 11 fittings in trenches complete all as specified and directed by enge-in-charge.

S&F stop cock 15mm bore standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed.

S&F bib tap 15mm bore standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed.

S&F heavy duty braided PVC connecting of PTMT pipe with brass adapters 450 mm long suitable for 15 mm dia pipe and fixing in position all as approved by engr-in-charge.

Supply and Fixing of three phase industrial plug and socket 5 Pin with MCB TPN 63 Amps capacity with sheet steel enclosure mounted on wall or floor with all fixing arrangements with provision of cable connection for incoming and outgoing complete and all as specified and directed

Supply, laying commessioning, testing of XLPE , armoured heavy duty electric under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core with aluminium conductor, conforming to IS 1554, ISI laid in tranchies, fixing on wall, under road crossing, etc complete all as specified and directed.

M&L Point wiring complete for One light/fan point controlled by one switch using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 2.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) stove enameled rigid steel surface mounted conduit of size not less than 20mm dia, heavy duty ISI marked as per IS:9557 (Part I) 1980 for one light points controlled by one Switch , including HFFR insulated unsheathed unitary construction copper conductor 2.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad complete all as specified and directed.

Supply & fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified & directed.

S&F flameproof tube light fitting CIMFR certified LED flameproof batten suitable for single T8 tube of 40W. Recommended for Gas/Vapour group of IIA & llB and Zone 1 & 2 .IP65 Protected LED flameproof made of aluminium alloy LM6 etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Crompton/ Sudhir/Baliga

S&F factory made Flame Proof sheet metal enclosure MCB DB 240 volts, 4 ways with 200A rated bus bar, Incoming MCB 2P 25Amp -01No Outing MCB 1P 20Amp -2Nos for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

Supply and fix flame proof exhaust fan 305 (12") mm sweep (heavy duty) single phase 220/230 volt AC 1440 RPM, with louvered shutters including mounting frame, nut, bolts, washer, fastners cutting work making enlisting finishing by putting plaster hole & making enietc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete with fixing arrangement and all as directed and specified .Make-SHUDHIR switch gear/bajaj or Equvallent ISI marked product.

Supply & fix Static discharge plate of stainless steel of size 20X50 cm complete all as specified & directed.

M&L for earthing complete with galvaniseded steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (Earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.50M below the normal ground level with and including provision of earth test point terminal block made out of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed with & including 3 Nos. 8mm dia 25mm long hexagonal head screw and necessary connections complete, connected to GI wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe light grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, chamber in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear, incl 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS bolts & washers as required and connection from earth test point to earth electrode with same GI wire alongwith protection pipe (upto max distance of 7.5 meter is included in unit rate) and testing on completion including taking out old u/s broken galvanised steel earthing material such as plate, pipe etc complete all as specified and directed.

SCHEDULE OF CREDIT

1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB

2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on "Schedule of credit" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount.

3. The total credit amount may vary as per execution of work above different items involved in this credit schedule.

4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified.

5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained

Srl No

Rate in (Rs)

Brick bats

Total amount of credit schedule

Signature of contractor

For ACCEPTING OFFICER