Misc Civil Related Work in 7th Flooroffices and Pantry at 8th Floor Shakti Bhawan (HQ) Lucknow

Amount

Laying and Jointing PVC Pipe. Heading

Providing and fixing tiled false ceiling of specified materialsGI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

Deluxe Multi surface paint system Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm for interiors and exteriors using Primer as per manufacturers specifications

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only.

Servicing of 1.5 Ton Air Conditioner and filling of GAS (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P.

Removal of old and damaged sunfilm from the glass panes of door and window shutters,including removal of Glue completely and carefully by scraping or by any means including cost of all materials, labour T&P etc. required for proper completion of the work

Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing & Fixing of Roller Blinds of approved shade as per drawing & specification as approved by the Architect/ Engineer -in-Charge

Providing & fixing of Centre Table And computer work station cum work table of different sizes as per requirment fitted in Room No.606.The Unit shall be measered by length x breadth of worktop and 0.76 mtr hight. The Entire Above Unit Shall be Fabricatrd with 19 mm Block Board Superior Quality Swastik Made all Extirior surface with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading.t.One no drawer nd one flap door fabricated with the help of 19 mm block board Swastik Block board /green or equivalen The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle The main table rack shall be approved matel handle and necessery m.p lock. all drawrs shall be provided with approved qaulity slider machnism. The foot board shall be also provided in above three peace .The work include cost of all labour,material T&P required for proper completion of work.

Providing and fixing superior,approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings at DIFFRENT cabin of Shakti Bhawan Extn, Lucknow as per direction of Engineer in charge. The work includes cost of all labour, material and T&P etc.

Replacing of Compressure of 1.5 Ton Air Conditioner (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P.

Providing and fixing 4 mm thick ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

AAKRITI ENTERPRISES

M/S KALPANAM CONCEPTS