SPECIAL REPAIR TO INTERNAL ROADS AT HQ EAC (U) AF

Amount

Material and labour for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified.

Material and labour for 75 mm thick premix bituminous macadam laid/rolled and compacted to required gradient and camber with 4% of paving bitumen VG-10 by weight of total mix complete all as specified. Note : Thickness shall be consolidated

Material and labour for preparation of surface prior to application of primer and applying evenly a priming/tack coat of cut back bitumen with bituminous primer at 5 kg per 10 sq metre complete all as specified.

Material and labour for preparing existing black top surfaces by brushing with wire brushing for removing caked/mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dust and Applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-10) at 05 kg per 10 sq metre and laying semi-dense asphalt concrete (Design Mix) 30 mm thick consolidated thickness, with binder content @5.5% by weight og total mix with hydrostatic sensor paverfinisher, rolled and consolidated with power roller exc. 8 tonne but not exc. 12 tonne capacity to required camber and gradient complete all as specified and as directed.

Material and labour for preparing bituminous surfaces of road and marking 2.0mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. complete all as specified and directed. Make: Asian Apcomark/ STP/ Shalimar Paints Ltd/ Berger Paint Ltd/ Jenson & Nicholson Paints Ltd/

Material and labour for preparation of new or previously treated surfaces for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, with adequate no of coats white or golden yellow., complete all as specified and directed.

Supply and fix as in repairs solar cat eyes (studs) made of aluminium dicasted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystaline solar panel(2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargable battery (1.2 V/1600 MA) having six super bright LEDs with 10000 to 18000 mcd (millicandela), view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardner etc as per manufacturer's instructions at the location complete all as directed. Model/Make: Make: Dark Eye/3M/ M/S Tata BP Solar

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. Make: Dark Eye/3M/ M/S Tata BP Solar

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified.

Material and labour for pavement floor vitrified ceramic tiles of size exceeding 0.09 sqm but not exceeding 0.36 sqm, 10 mm thick set and jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour to match existing surfaces laid over 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Nitco/ Orient Bell Ltd

Material and labour for 25 mm thick PCC 1:2:4 type B0 using 12.50 mm graded crushed stone aggregates as inlevelling coarse of floors, surface finished even and fair complete all as specified.

Material and labour for preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel (Ordinary tint). complete all as specified and directed. Make: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

M/s B.Citymai Syiem