Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹9.2 L
EMD Value
₹9,150
Closing Date
25 Apr 2025, 3:00 pmClosed
Executive Officer
TOWN PANCHAYAT MELAGARAM
Erection Of liquid Based Chlorinator at Rayarthoppu OHT in Melagaram Town panchayat.
2025_DTP_547979_1
36-2/2025
Open Tender
Civil Works
Works
Melagaram
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹9,150
9 May 2025
18 Apr 2025
25 Apr 2025
18 Apr 2025
25 Apr 2025
18 Apr 2025
Supply and Delivery Erection of Skid Based Chorination system (Liquid) With Suitable ISO 14001 Mechinical Diaphragm A.Preparation Preparation tank & Storage tank ,Type:500 litre,Size:STD,Lifting Hook:Suitable Lifting Device Shall Be Provided on skid,Usuable Capacity;525 Litre,Liquid/Soultion to be handled:Chlorine,material of construction :PP/LDPE,Design pressure:ATM+Full of Liquid,Testing;Leakage test,Quantity:1Nos.B.Dosing pump/transfer Pump,make;Rotomack/ACL/Rotopump,Model:MMDP-1,Type:Meachanical Diaphragm Type,Offered Capacity:0-75 LPH,Spm/Ratio:100/15:1,Diaphragm:PTFE,Flow Control:Manually,Turn Down ratio:10:1,Pump Standard:MFG STD,Efficiency/Accuracy:97%/+_3%,Suction:Flanged Type,Discharge pressure:4.0Kg/cm2,PRV Set pressure:5.0Kg/cm2,Connection Suction:15NB,Connection discharge:15NB,Materials of wetted Parts:PP,Qty:2Nos.C.Pump Drive motor Make:CGL/BBL,Type:Squirrel cage induction Motor IEC Zone-IE 2,Supply System:3PH induction,Ac,415V+-10%,50HZ+_5%,mounting/Deg protection:B 3(foot mounted)/IP 55,No of poles/Rpm:4 Ploes/1440Rpm,Insulation class/Temp Rise:Class F/Limited ti Class B,Method of collingL:TEFC,Applicable Standards:IS 325,Rating:0.5Hp,Motor frame Type:As per DIN /IEC 34-7,Duty Class:S1:100% continuous operation,Noise leve:85DB (A) at a distance of 1Mtr,D.Motor-Pump Shaft coupling Make:Rathi couplings/Equivalent,Type:Love joy/Suitable Flexible Coupling,Qty:1 nos E.Fitting Make:Reputed &approved ISO-9000 Certified Supplier Type:15NB (SW) Material of Construction:PP F.Flanges Size:15NB SWRF#150,material of construction:PP/Upvc,Inlet Terminal Flange/Tank Flange:15NB SWRF#150,Outlet Terminal Flange/Companion Flange:15NE SWRF#150,Qty:At Actual G. Pulsation Dampner Type:Volume Bottle Type,Capacity:1.5Lit,Moc:PP/UPVC,Qty:1Nos H.Pressure Gauge with Isolation Valve Make:WAREE/WIKA/STD,Type:Bourdon Sensing Type,Mounting:Dirtect Bottom,Dial Size:100mm,Moc:SS,Accuracy:1.6%,Range:0-14Kg/cm2,Qty:1No I.NRV Type:Lift Check Type,End Connection:15NB SW,Moc:PP/UPVC,Qty:1Nos J.PRV Type:Spring loaded,Connection:15NB 300#,PRV set presure:5.0Kg/cm2,Moc:PP/UPVC Qty;1Nos K.Strainer Fliration rating:40Mesh,Size:15NB,Moc:PP/UPVC,Qty:1No l.Level Gauge Type:Transparent Tubular Type,Moc:PP,End Connection 15NB 150# Flanged,Qty:1Nos M.Ball Valve Make;Astral/Finolex/Std,Typr:Ball Valve for suction &Discharge Material of Construction;PP/UPVC,End connection:SW,Size:15NB SW #150,Qty:At Actual N.Piping Within the Skid Size/Rating of Pipe:15NB Seamless SCH40/80 Suction Moc;PP/UPVC,Discharge Moc:PP/UPVC O.Gaskets Materilas of construction Spiral Wound Gasket CS Outer Inner SS Qty:At Actual P.Fastners Make:Standard,Marterial of construction:MS Galvanised,Qty:At Actual. Q.SKID/Base Frame Base Frame: a common bae frame for tank,Pump and Lifing Lugs,Supports shall be provided to and scope of supply,Stool for pump:Pump shall rest not less than 300mm,Foundation Bolt:M-12X150mm,Material of construction:CS(IS:2062),Primer/Zinc Rich Epoxy Finish/Highbuilt Epxy:Frame shall be patient with 2 coats of epoxy primer and 2 coats of epoxy paint,colour-Blue Std R.Agitator With control Panel: 0.5Hp-1No
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .