Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.5 LAccepted-AOC C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹13.8 L+₹1.7 L (13.8%)Rejected-Finance KHUNMOH SRINAGAR PIN 191104 J K | SRINAGAR | SRINAGAR | J K | 191104 | L-2 | Rejected-Finance Being not L-1. |
| Sl No | Description | Qty | Unit | M/S HAFIZ AND SONS L2 | M/S A.N CONSTRUCTIONs L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation as in any type of soil for poles/stay/cable etc. including getting out in any type of soil complete all as specified and directed by Engineer-in-Charge. | 399.6 | Cum | 200 ₹79,920 | 140 ₹55,944 Lowest |
| 2.00 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick as in soils complete all as specified and directed by Engineer-in-Charge. | 227.22 | Cum | 50 ₹11,361 Lowest | 50 ₹11,361 Lowest |
| 3.00 | Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. | 172.38 | Cum | 50 ₹8,619 Lowest | 50 ₹8,619 Lowest |
| 4.00 | M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by Engineer-in-Charge.
Note: Punned thickness of 18 cms shall be measured and paid. | 119.88 | Cum | 650 ₹77,922 Lowest | 900 ₹1,07,892 |
| 5.00 | M&L for Sub Class 'B' bricks for covering protection to the electric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed by Engineer-in-Charge. | 13.74 | Per 1000 Nos | 7,000 ₹96,180 | 6,000 ₹82,440 Lowest |
| 6.00 | S&F in replacement of Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut, insulator size 100 mm height and 65mm dia 1100 volts grade complete all as specified and directed by Engineer-in-Charge. | 8 | Each | 400 ₹3,200 | 160 ₹1,280 Lowest |
| 7.00 | S&F in replacement of Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade complete all as specified and directed by Engineer-in-Charge. | 8 | Each | 550 ₹4,400 | 160 ₹1,280 Lowest |
| 8.00 | M&L for mild steel cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint complete including dismantling of existing cross arms of MS channel complete all as specified and directed by Engineer-in-Charge. | 1 | Per Qtl | 400 ₹400 Lowest | 9,000 ₹9,000 |
| 9.00 | Re-stretching only the ACSR conductor fixed on over head line pole and tightening the ACSR, taking down the conductor from insulators complete with authorised sag and rewinding with insulators in proper position after tightening with new aluminium winding wire of dia 2mm all as specified and directed by Engineer-in -Charge. | 100 | RM | 70 ₹7,000 Lowest | 70 ₹7,000 Lowest |
| 10.00 | Supply and laying in replacement GI tubing 40mm dia, light grade with all fittings laid in trenches or fixed on wall along pole including fixing arrangement nuts, bolts, clamp etc complete for protection of electric cable/strip complete all as specified and directed by Engineer-in-Charge. | 60 | RM | 250 ₹15,000 Lowest | 250 ₹15,000 Lowest |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
31 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
REPAIR AND MAINT OF EXTERNAL ELECTRIC LOW TENSION DISTRIBUTION SYSTEM AT KHUNMOH GRN UNDER GE 861 EWS
2025_MES_717497_1
GE 861 EWS-33 (T)/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹32,000
Yes
14 Oct 2025
28 Jun 2025
7 Aug 2025
28 Jun 2025
31 Jul 2025
12 Jul 2025
Amount
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation as in any type of soil for poles/stay/cable etc. including getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick as in soils complete all as specified and directed by Engineer-in-Charge.
Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by Engineer-in-Charge. Note: Punned thickness of 18 cms shall be measured and paid.
M&L for Sub Class 'B' bricks for covering protection to the electric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut, insulator size 100 mm height and 65mm dia 1100 volts grade complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint complete including dismantling of existing cross arms of MS channel complete all as specified and directed by Engineer-in-Charge.
Re-stretching only the ACSR conductor fixed on over head line pole and tightening the ACSR, taking down the conductor from insulators complete with authorised sag and rewinding with insulators in proper position after tightening with new aluminium winding wire of dia 2mm all as specified and directed by Engineer-in -Charge.
Supply and laying in replacement GI tubing 40mm dia, light grade with all fittings laid in trenches or fixed on wall along pole including fixing arrangement nuts, bolts, clamp etc complete for protection of electric cable/strip complete all as specified and directed by Engineer-in-Charge.
Supply and laying in replacement GI tubing 80mm dia light grade with all fitting laid in trenchs or fixed on wall along pole including fixing arrangement nuts, bolts, clamp etc complete for protection of electric cable/strip complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of single pointed air termination rod aluminium rod 12 mm dia and 300 mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs of aluminium strip 25mmx3.15 mm with saddles and fixing screws for roof conductor/down conductors, insulators etc. complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron strip 32 x 6 mm means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in any type of soil and disposal of surplus soil to a distance not exc 50 metres, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete all as shown in electrical plate No 3 of SSR part-I including welding with suitable electrode and testing complete all as specified and directed by Engineer-in-Charge. (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 mtrs shall be deemed to be included in the unit rate quoted against this item. (ii) M&L of S&F tubing GI med grade 40mm dia for protection of earthing strip and passing the Road/passes and etc. shall deemed to be included in the unit rate quoted against this item. (iii) On testing, after completion, if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department.
M&L for road cutting including excavation in trenches for laying LT Cable of any size not exc 30 cm wide and n.exc 75 cm depth as per site requirement including making good the disturbed surfaces with cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) and top surface neatly finished to match with the existing surface of road complete all as specified and directed by Engineer-in-Charge.
Supply, laying and testing in replacement cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 25 sq mm 3.5 core, laid in trench/ duct / along pole/wall/ road crossing etc. including making connection complete all as specified and directed by Engineer-in-Charge. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc. is included in quoted rate and no extra payment will be made for it.
Description all as per item No. 16 above but cross sectional area 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 50 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 70 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 120 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 240 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 16 Sqmm 4 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No. 16 above but cross sectional area 10 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat of size 10.0 sqmm for service connection complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat of size 16sqmm for service connection complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of danger notice board 1.6mm thick M.S sheet, vitreous enamelled white with letters, figures and conventional skull and bone in signal red colour and fixed with M.S clamps, bolts and nuts of approved size for LT 20x15cm size complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of voltmeter 0-500 volts digital type including taking down old existing unserviceable complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of Ammeter 0-400Amps digital type including taking down old existing unserviceable ammeter complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of indication lamp (RYB) including taking down old existing unserviceable complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement 2.5 Sq mm two core PVC insulated flexible copper conductor wire for street/security light connection complete all as specified and directed by Engineer-in-Charge.
S&F in replacement to existing any type fitting by LED street light 45 watt energy saving and environment friendly light fitting with electronic gear housed in pressure dia cast aluminium housing LED street light luminaires with IP66 Protection including all accessories complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement rigid non-metallic PVC conduit of size 20 mm dia including all fixing accessories for pole/ wall, couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 350 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of Changeover switch off load type 415 volts TPN in sheet metal enclosure 4 pole of capacity 100 Amps complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of Changeover switch, off load type, 415 volts TPN in sheet metal enclosure 4 pole of capacity 63 Amps complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of Changeover switch, off load type 415 volts TPN in sheet metal enclosure 4 pole of capacity 200 Amps complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of Changeover switch, off load type 230 volts Single Pole in sheet metal enclosure of capacity 32 Amps complete all as specified and directed by Engineer-in-Charge.
M/S HAFIZ AND SONS (BID ID -3372735)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .