Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.1 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹32.4 L+₹1.6 L (5.26%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹39.4 L+₹8.6 L (27.9%)Rejected-Finance NEAR GURUDWARA JHANSI BHOPAL ROAD SAUGOR M P 470002 | SAUGOR | SAGAR | MADHYA PRADESH | 470002 | L3 | Rejected-Finance 3rd lowest bid |
Tender Value
₹37.4 L
EMD Value
₹75,000
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Saugor
GE Saugor
SPL REPAIRS TO OR BATHROOM AND TOILET BUILDINGS OF 36 RSR AND SPL REPAIR, REPLACEMENT OF BDY PILLAR AT BAMORI FIELD FIRING RANGE UNDER GE SAUGOR.
2022_MES_535324_1
GE/SGR/TOK-34 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Saugor
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAUGOR
₹75,000
Yes
23 Aug 2022
2 Jul 2022
27 Jul 2022
2 Jul 2022
25 Jul 2022
13 Jul 2022
60 days
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed
M&L for raking out joints/ pointing to brick work in walls built in cement mortar complete all as specified and directed
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles and rubbish off the premises complete all as specified and directed
Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed
Demolition of RCC in any location and any thicknes (reinforced) complete all as specified and directed
M&L for moorum/red bajri filling in floors or pavings laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm each complete all as specified and directed .
M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
M&L for mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.
M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
M&L for coloured non - skid seramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
M&L for coloured glazed ceramic tiles 450mmX350mmX7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces such as skirting/dado set laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in lintel band complete all as specified and directed
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed
M&L for plain cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregates) as in sub base complete all as specified and directed
M&L for 25mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed.
M&L for rendering 20mm thick cement plaster in cement mortar 1:6 on stone masonary / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed .
M&L for two coat cement plaster, first coat 15mm thick in CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 mixed with WPC, surface finished even and smooth without using extra cement complete all as specifie and directed. Note:-WPC shall be measured and paid seperately under respective item.
Supply only integral water proofing compound complete all as specified and directed .
M&L for preparation of old wall surfaces and applying two coats of white wash complete all as specified and directed .
M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed .
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Taking down and refixing Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed..
S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Aluminium section thickness 2mm }
S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed .
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet on the front face & 4mm prelam PVC sheet on back face complete all as specified and directed .
Taking down door shutters and frames of any description exc 1 Sqm but not exc 2 Sqm and re-fixing in same opening or different opening after closing and adjusing to the size including necessary hinges complete all as specified and directed .
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.
M&L for one coat of synthetic enamelled paint on old painted steel based surface of any desription over 10cm width or girth including preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed .
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed .
S&F 100mm size butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed .
M&L for cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. one brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed .
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm bore GI tubing and connections complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm bore GI tubing and connections complete all as specified and directed
S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.
S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed .
S&F in repair chromium plated bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed
S&F in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed .
S&F in repair concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed .
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed ..
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed .
S&F in repair vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified and directed.
S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580mmx440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed.
S&F in repairs vitreous China bowl urinal angle back of size 430mm x 370mm x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed .
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed ..
S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), ISI marked, three layered wall construction hoisted & fixed in position complete all as specified and directed.
S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]
S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or in trenches including mild steel clamps complete all as specified.
S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed .
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repairs PVC(SWR) vent cowl of 110mm dia complete all as specified and directed .
S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed .
Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) complete all as specified and directed .
M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed
M&L for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed
S&F polished red stone 20mm to 25mm thick of size 20cmX20cm fixed on pillar including engraving the letters and numbers complete all as directed.
M&L for concealed point wiring with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed:-
For one light, fan point controlled by one switch
For one 5 Amp independent socket point controlled by one switch
For one 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.68 here in before but for power point wiring using with 2.5 sqmm PVC-FR insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-
S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed
S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed
S&F socket modular 6/16 Amp, 2/3 pin combined, 2 module 230 Volt complete all as specified and directed
S&F modular ceiling rose, surface backlit,three terminal. complete all as specified and directed.
S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.
S&F in replacement MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. complete all as specified and directed.
All as per Srl item No.22 above but SPN 40 Amps, 240 V -ditto-
S&F in replacement sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed.
S&F in replacement TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet / Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL
S&F in replacement LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make:- Havells cat part No LHEXCGP7UN5W013/BAJAJ cat part No BIBWP10WLED /CG cat part No LBH-10-CDL.
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make -Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 core complete all as specified and directed
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable and getting out in any type of soil complete all as specified and directed.
M&L for sand cushioning in trenches for the cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid
Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed
Removing excavated surplus material not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and directed.
M&L for kiln burnt bricks sub class 'B, laid in trenches for cable protection complete all as specified and directed
S&F in replacement of GI pipe light grade 40mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
M&L for earthing complete with galvanised steel earth plate electrode, 600mmx600mmx6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate No 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.
anil kumar sahu
SAGAR MOTOR AND TRACTOR CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .