REPAIRS / MAINTENANCE AND REPLACEMENT OF LT SWITCH GEARS, LT PANELS AND OTHER CONNECTED WORKS AT BEG AND CENTRE UNDER AGE E/M-I AT GE (CENTRAL) KHADKI.

Amount

Dismantling and taking down old/unsv cross arms, bracing, supports etc complete for reuse at site or carrying to store for sch of credit all as specified and directed.

Supply and fix cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complte all as specified and directed.

Dismantling and taking down old/unsv aluminum conductor steel reinforced conductor any size complete for reuse at site or carrying to store for Sch of Credit all as specified and directed

Supply and fix aluminum conductor steel reinforced incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection all as dercted

Dismantling and taking down old/unsv insulator of any type any size from pole/stay for reuse at site or carrying to store for sch of credit complete all as specified and directed.

Supply and fix pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade all as specified and directed.

Supply and fix shackle type, porcelian vitreous white, brown or green insulator including galvanised mild steel straps , washers, insulators bolts, washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and directed.

Supply and fix loop type insulator, porcelian vitreous brown of size 65x90mm and clearence hole 16mm complete all as specified and as directed.

Supply and fix MCCB in existing panel frame, 4 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 400 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand Cat Part No 4220-07 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 4 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 320 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand Cat Part No 44220-06 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 4 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 250 amps incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand 4202-19 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 4 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 200 amps incl dismantling taking down unsv one, complete all as specified and as directed MAKE :- Legrand 4202-18 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 4 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 160 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand cat Part No 4200-57 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 4 pole,36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 125 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand cat Part No 4200-56 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 4 pole,36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 100 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand cat Part No 4200-55 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 3 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 320 to 400 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand Cat Part No 4220-01 &02 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 3 pole, 36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 200 amps, incl dismantling taking down unsv one, complete all as specified and as directed MAKE :- Legrand Cat Part No 4202-08 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 3 pole, 36KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 160 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand Cat Part No 4202-47 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 3 pole,16KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 125 amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand Cat Part No 4200 46 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix MCCB in existing panel frame, 3 pole,16KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 40amps, incl dismantling taking down unsv one, complete all as specified and as directed. MAKE :- Legrand Cat Part No 4200 45 or equivelent model of Schneider/ABB/Merlin Gerin.

Supply and fix extended rotary handle suitable for use on WB2 MCCB CD 100 ( EH1-S) including taking down unserviceable complete all as specified and directed by Engr-in-Charge MAKE :- C&S or equivalent Schneider / ABB/ Legrand .

Supply and fix direct rotary handle suitable for use on WB2 MCCB CD 100 ( DH1) including taking down unserviceable complete all as specified and directed by Engr-in-Charge MAKE :- C&S to 4085-95 or equivalent Schneider / ABB /Legrand .

Supply and fix MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve including taking down unserviceable complete all as specified and directed by Engr-in-Charge MAKE :- Legrand cat part No 4085-87 to 4085-95 or equivalent Schneider / ABB .

Supply and fix MCB, Double Pole 6 to 32 amps, 240 Volts, 10 KA ‘’C” curve including taking down unserviceable complete all as specified and directed by Engr-in-Charge. MAKE :- Legrand cat part No 4086-09 to 4086-17 or equivalent Schneider / ABB

Supply and fix MCB TPN 32 Amps, 415 volt 10 KA, including taking down unserviceable complete all as specified and directed by Engr-in-Charge. MAKE :- Legrand cat part No 4086-59 to 4086-61 or equivalent Schneider / ABB

Material and labour for earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 25x4 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 25x4mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Material and labour for restraining of overhead aluminum conductor steel reinforced of any size of 4 wire on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed .

Material and labour for restraining of aluminum conductor steel reinforced of any size of 2 wire on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed

Cutting/Trimming of tree branches arround 3.00 mtr distance from conductors of HT over head line of span up to 50 meters including removing of creepers etc from poles.

Cutting/Trimming of tree branches arround 3.00 mtr distance from conductors of LT over head line of span up to 40 meters including removing of creepers/vegitation etc from poles

Painting of steel pole any type up to 7.5 mtr height above ground level including cross arms, clamps, stay clamps etc with two coats of aluminium paint after surface preparation all as directed by Engr-In-Charge

Numbering of HT/LT poles serially with letter/number size width and height up to 40 mm in situ with black paint on white back ground

Supply and fix heat shrink straight through joint LT 1100 volts grade 10-16 sqmm, 4 core, complete all as specified and as directed. MAKE :- Raychem, Cat No-EPKJ0123 or equivelent of M-Seal/MS Seal/3M

Supply and fix heat shrink straight through joint LT 1100 volts grade 25-50 sqmm, 4 core, complete all as specified and as directed. MAKE :- Raychem, Cat No-EPKJ0130 or equivelent of M-Seal/MS Seal/3M

Supply and fix Heat shrink straight through joint LT 1100 volts grade 70-150 sqmm, 4 core, complete all as specified and as directed. MAKE :- Raychem, Cat No-EPKJ0137 or equivelent of M-Seal/MS Seal/3M

Supply and fix Heat shrink straight through joint LT 1100 volts grade 185-300 sqmm, 4 core, complete all as specified and as directed. MAKE :- Raychem, Cat No-EPKJ0144 or equivelent of M-Seal/MS Seal/3M

Supply & fixing 4mm dia Hot Dipped Galvanized Chain Link Fencing with Zinc Coating, including line wires, any type of standards, rails, straining bolts, etc. including provission of binding wire incl dismantling taking down unserviceable one (2.8 Kg per sqm with 2"x2" mess of 3 mm wire)

Material and labour for mild steel work of angle fixed independently for fencing post and others confirming to Gde Fe 410-A incl cutting to dead end length where required, notching, drilling, fitting and welding or connecting with bolts and nuts incl dismantling taking down unsv one complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securingwith clips complete for support of chain link fencing incl dismantling taking down unsv one all as specified and directed.

Supply and fix junction box SMC type suitable for fixing on LT pole size 30cmx25 cmx15cm with side hinged door and locking arrangment and suitable for terminal single phase including MCB 6-10A SP, and fixing in position with nut, bolt clamp incl dismantling old Junction box all as specified and directed.

Material and labour for street light bracket, made out of 40/50 mm dia GI pipe as per requirement, (medium grade) 1.5 metre long bend to shape as required with nut bolt and clamp and fixing in position incl dismantling taking down unsv complete all as specified and directed.

Repair to any type of LT panel with cutting necessary worn out portion of MS sheet, angle iron and providing MS sheet of 2mm, MS angle iron of existing size and hinges to broken door etc fixed with electric arc welding, providing external locking arrangement after taking proper electric shutdown complete all as specified and as directed. NOTE :- Material such as MS sheet, angle iron, hinges measured separately as supply only here-in-after

Repair to any type of LT feeder pillar with cutting necessary worn out portion of MS sheet, angle iron and providing MS sheet of 2mm, MS angle iron of existing size and hinges to broken door etc fixed with electric arc welding, providing external locking arrangement and painting with one coat of red oxide to effected area complete afterafter taking proper electric shutdown. complete all as specified and as directed. NOTE :- Material such as MS sheet, angle iron, hinges measured separately as supply only here-in-after

Supply only MS angle iron Fe 410-W (grade E-250 quality- A) of any size/MS sheet of any thickness /MS hinges (With ref to item No- 20) all as directed.

Painting of LT feeder pillar box/distribution box/ wall panell both side with one coat of red oxide and with one coat of gray paint after surface preparation with taking proper electric shutdown all as specified and directed by Engr-In-Charge.

Painting of LT Panel both side with one coat of red oxide and with one coat of gray paint after surface preparation with taking proper electric shutdown all as specified and directed by Engr-In-Charge.

Labour for disconnecting LT cable of any size from structure/pole/transformer for finding fault , Material and labour for defect rectification LT cable laid in trenches or any location by locating fault with the help of electronic fault machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. The entire repair work to be completed with in 12 hours of instruction from Engr-in-charge as specified. NOTE :- Complaint will be notified to contractor on mobile phone at any time between 0800 to 2200 Hrs and has to be rectified with in 12 hours after notification, failing to which Rs. 500/- per day complaint will be recoverd. fault locating with electronic fault locator, excavation and earth work, disconnecting and reconnecting both end of cable, relaying of sand and protective cable covers are deemed to be included in the quoted rate all as specified and directed by Engr-in-charge. Note :- Joint kit will be measured seperately in appropriate item in this schedule

Labour only for disconnecting LT cable of any size from pole (height 7.5 to 9 mtr) /transformer panle and re-connecting of cable at both end after removing carbon /burnt insulation part of cable by cutting refixing cable with new cable lugs . The entire repair work to be completed with in 06 hours of instruction from Engr-in-charge as specified. NOTE :- Complaint will be notified to contractor on mobile phone at any time between 0800 to 2200 Hrs and has to be rectified with in 06 hours after notification, failing to which Rs500/- per day complaint will be recoverd.

Supply and fix automatic street light switch nature for street lights based on LUX level of natural light. Th sensor (Nature Switch) along with suitable Power contactor, MCB and support Terminals should be enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof,Termite proof and FR grade special moulding compound (Sintex make SMC junction box) conforming to IP54. The contactor, MCB and circuit wiring should suitable enough to take load of 8 kW single phase load, Contactor rating :40 Amps (2-pole), MCB (Single pole) Rating 63 Amps (2 Nos) complete all as specified and directed by Engr-in-Charge. Nature Switch :- Kakatiya Energy System Ltd, Hyderabad, Model : SWADEEP -02C8KW1P or quivalent

Supply and fix automatic street light nature switch using for street lights based on LUX level of natural light. Th sensor (Nature Switch) along with suitable Power contactor, MCB and support Terminals should be enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof,Termite proof and FR grade special moulding compound (Sintex make SMC junction box) conforming to IP54. The contactor, MCB and circuit wiring should suitable enough to take load of 12 kW load equally distributed over three phase load, Contactor rating : 63Amps (4-pole), MCB (Single pole) Rating 63 Amps (3 Nos) complete all as specified and directed by Engr-in-Charge Nature Switch :- Kakatiya Energy System Ltd, Hyderabad, Model : SWADEEP -02C12KW3P or equivalent

Supply and replacement of PVC flexible cable 1.5 sqmm stranded copper conductor three core cable from street light mounted on pole to Junction box including taking unsv cable from any position. MAKE :- Polycab, Havells, Anchor or equivalent.

Supply and fix of LED 120W flood light, aesthetically designed roadway luminiare with excellent thermal management, pressure die-cast aluminium alloy for housing (heat sink) with epoxy powder coated with high efficiency long life LED chip inbuilt with electronic driver with APFC and including taking down old street light fitting with bracket of any type and from any position MAKE :- Crompton Cat part No LFLN-120CDL/60M or equivalent in Philips, Wipro

Supply and fix of LED 120W street light, aesthetically designed roadway luminiare with excellent thermal management, pressure die-cast aluminium alloy for housing (heat sink) with epoxy powder coated with high efficiency long life LED chip inbuilt with electronic driver with APFC and including taking down old street light fitting with bracket of any type and from any position MAKE :- Crompton Cat part No CRP-411-120-57-HL2-GL-NSG or equivalent in Philips & Wipro

Supply and fix LED bollard light with robust design and efficient light distribution of 10 watt ,230 Volt AC with all fittings complete on PCC foundation including dismantling taking down old bollard light from PCC foundation all as specified and directed. MAKE :- CG Cat No LBLSN-10-CDL or equivalent, Philips, Wipro. NOTE :- PCC will be measured separately.

Supply and fix bright light 8 inch Milky Doom, round shape outdoor type including taking down unserviceable complete all as specified and directed by Engr-in-Charge.

Supply and fix glow sign board size 12'3" x 3'2" x 1'.1" at various sub stn holding on 3.5 mtr height MS pipe 32 mm, height 3 mtr, painting with one coat red oxide primer and 2 coat synthethic enamel paint, providing lighting /Illumination with two tuble light set including dismantling taking down old glow sign board all as specified and directed by Engr-in Charge.

Dismantling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long and kepping aside for refixing or carrying to store for credit

Material and labour for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 mtr long).

Labour only for re-fixing of steel tubular swaged pole complete with cast iron base plate , painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type (9 mtr long).

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe, cable and getting out in soft loose soil.

Description all as per item No. 60 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work including demoliton of old PCC complete all as specified and directed.

Material and labour for stone dust for cousioning of UG cable/ at cable trenches inside substation bulding

Material and labourfor brick protection with sub class 'B' brick for UG cable

Dismantling taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismantling ends from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Materisl and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core with required aluminium cable lugs all as specified and directed. NOTE :- (i) Heat shrink straight through joint 2 core/4 core will be measured and paid separatley. (ii) Serviceable GI tubing obtained from item No-60 above for cable protection will be refixed/relaid, No extra measurement/payment will be made.

Description all as per item No.69 above but 10sqmm 2 core complete all as specified and as directed

Description all as per item No. 69 above but 16sqmm 2 core complete all as specified and as directed

Description all as per item No. 69 above but 10sqmm 4 core complete all as specified and as directed.

Description all as per item No. 69 here-in-before but 16sqmm 4 core complete all as specified and as directed.

Description all as per item No. 69 above but 25sqmm 3.5 core complete all as specified and as directed.

Description all as per item No. 69 above but 50sqmm 3.5 core complete all as specified and as directed.

Description all as per item No. 69 above but 70sqmm 3.5 core complete all as specified and as directed.

Description all as per item No. 69 above but 95sqmm 3.5 core complete all as specified and as directed.

Description all as per item No. 69 above but 120sqmm 3.5 core complete all as specified and as directed.

Supply and fix GI tubing light grade 40mm bore,on pole /wall with necessary clamps, nuts, bolts and washers/under road cross ISI marked, for cable protection including taking down unsv one all as specified and directed.

Supply and fix only GI tubing light grade 50mm bore on pole /wall with necessary clamps, nuts, bolts and washers/under road cross ISI marked, for cable protection, ISI marked, for cable protection including taking down unsv one all as specified and directed.

Supplyand fix GI tubing light grade 80mm bore,on pole /wall with necessary clamps, nuts, bolts and washers/under road cross ISI marked, for cable protection ISI marked, for cable protection including taking down unsv one all as specified and directed.

Material and labour for cleaning of MES Electric supply installations / campus by surface dressing or trimming of natural ground to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth ) & carrying away the rubbish to a distance of n.exc 50 mtr away complete at an interval of every 30 days for the location - HT Main receiving sub station at TB-I approx area 900 sqm

Description all as item 82 as above but substation at APS and family accn-II approx area 600 sqm

Description all as item 82 as above but substation at MAP Accn Depot Bn approx area 200 sqm

Description all as item 82 as above but substation at Pioneer circle approx area 120 sqm

Description all items as 82 above but substation at Swimming Pool approx area 120 sqm

Description all as item 82 as above but substation at Offrs Mess approx area 120 sqm

Description all as item 82 as above substation at TB-1 MAP Accn approx area 200 sqm

Description all as item 82 as above substation at Depot Bn Line Bazar gate approx area 120 sqm

Description all as item 82 as above but sub station at TB-I near out door VCB approx area 120 sqm

Description all as item 82 as above but HT Main receiving station and back side approx 300 sqm

Supply and fix PVC line seperator suitable for 4 conductors OH Line 1100 volts grade.

Supply and fix PVC line seperator suitable for 2 conductors OH Line 1100 volts grade.

Supply and fix in repair of on load change over switch 100 Amp, 4 Pole , 440 volt steel with sheet enclosure including dismantling old unserviceable complete all as specified and directed. MAKE :- havells/L&T

Description all as as per item No 97 above but size 125 Amp

Description all as per item No 97 above but size 160 Amp

Description all as per item No 97 above but size 200 Amp

Material and labour for rigid PVC conduit of size 25mm inclusive of all fittings i.e. tees, bends, elbows, bell mount tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc in trench/wall pole including taking down old Pipe complete all as specified and directed.

Excavation in trenches in soft rock/road cutting not exc. 1.5 meter wide and not exc. 1.5 meter in depth complete all as specified and directed by Engr-in-Charge.

Material and labour for cold bitumen macadam for road surfaces dressing at road cutting area for cable laying and patches at damaged and cracked road complete all as specified and complete all as specified and directed by Engr-in-Charge.

SHRI SWAPNAYOG ENTERPRISES

ONKAR ELECTRIC AND GENERAL STORE

TULAJA ENTERPRISES