Repair/ maintenance of BFL UG Cable at BOP Kantabari 174 Bn

Amount

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. (1.1) Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. (2.1) 3½ X 95 sq. mm

3½ X 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. (3.1) 3½ X 185 sq. mm (57 mm)

Fabrication, supplying, installation, testing and commissioning of outdoor type joint box of size 600 mm x 500 mm x 400 mm deep fabricated out of 2.0 mm CRCA sheet with intermediate memberes of same material and guage as required. The box should be supported by 600 mm long legs and frame made by 50 mm x 50 mm x 6 mm thick MS angle iron at the base and almirah type single leaf hinged door with locking arrangement, gland plate at the bottom, water drip proofing arrangement at the top, air ventilation grooves at sides dust and vermin proof design, earthing studs, 200 Amps 4 Nos. aluminium strip bus bar having base connector insualation duly painted with power coated paint etc. as required.

ELECTRO MECHANICAL ENGINEERING

UNIVERSAL CONSTRUCTION