Providing and fixing of chain-link fencing in cement concrete blocks and planting of 6500 willow at Gyamtsa community area of Leh Forest Range for the year 2024-25. Under (SDP new Scheme),

Amount

Earth work in excavation by manual means, the digging pits in hard soil over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including gathering out and disposal of excavated earth lead upto 50mm and rift) upto 1.5m, as directed incharge. (All kind in soil.)

Providing and laying in cement concrete of specified grade include.Curing but excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size crushed stone aggregate ) in blocks.

Providing and fixing of angle iron fence post made of MS angles (50 x 50 x 6mm) in built up sections and framed works including. Cutting housing single section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bends.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns etc for mass concrete.

Providing and fixing of G.I chain link fencing fabric 4mm dia fence cold dip galvanized of required mesh size 10 cm x 10 cm wire of ( 4" x 4") mesh, including strengthening /binding with 2mmdia G.I wire or nut bolts and washer as required completely.

Providing and laying and strengthening of barbed wire at top of the fence post including all jobs.

Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm dia etc of complete job. Flat

Providing and installation of fabric iron Gates 6' x 12'= 1 Nos with angle iron framed including. Master pillars( 6'' x 6'') with cutting hoisting welding and all fitted and fixture and all lead completely

Providing and installation of fabric iron Gates 4'x6'=1 Nos with angle iron Framed including. Master pillars (6''x6'') with cutting hoisting welding and all fitted and fixture and all lead completely.

Providing and fixing MS iron sheet 3mm of require pattern for Sign Board for main Gate Entrance with one coat of steel primier and two coats of paint including departmental logo and writing etc with cement concrete, sizing (6'x4'') with 7'.00'' legs (50x50x6mm) 1 Nos including all jobs as directed by incharge.

Carriage of sand and stone agg. By Mechanical Tansport from source to working site for a distance of 20.00km.

Carriage of Cement. By Mechanical Transport from Leh to Gyamtsa by an average of 15 Km.

Carriage of Fencing Materials by mechanical Transport from Leh to Gyamtsa for an average of 15km.

Purchase of willow green cutting from progressive farmer, this including collection, bundling and internal carriage etc.

Pits Planting of willow green cutting this including excavation of pits 0.45x0.45x0.45m along the contour as well as on flat surface.

Carriage of planting materials from near sources to planting site by M. transport, this includes loading and unloading charges etc.

Earth work in excavation by mechanical means ( hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.

M/S BALTOK WIRE AND NAIL MANUFACTURING (BID ID -153328)

M/S JIGMET DORJEY (BID ID -153410)

M/S GYALCHAN STEEL FABRICATION (BID ID -153048)

TSETAN GAILSON (BID ID -153313)

MIRZA HUSSAIN (BID ID -153471)

sonam tundup (BID ID -153583)

M/S TASHI NAMGAIL (BID ID -153513)

M/S STANZIN CHOTZANG (BID ID -153510)

Aggxima Entrprise (BID ID -153081)

M/S JIGMET RINCHEN GOVT CONTRACTOR (BID ID -153531)