INTEGRATED WELCOME MAINT AND PERIODICAL SERVICES INCLUDING CERTAIN E/M and B/R WORKS TO OTM AND MD ACCN AT CQA(V) AND DAD COMPLEX UNDER GE(SOUTH) AHMEDNAGAR

Amount

Taking down cement or cement lime plaster of any description on brick work or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete and removing debris all as specified and as directed.

M&L for brick work with fly ash bricks (old size), straight or curved on plan, exc 6 m mean redius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar 1:4 mixed with water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed. (Note : Supply only integral water proofing compound shall be measured and paid seperately under respective item)

M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick/concrete surfaces, finish even & smooth without using extra cement all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces on ceiling, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound etc complete all as specified and as directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered wall surfaces including cornices, pillars etc, and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying 2mm thick (minimum) wall care putty including sanding of putty surfaces after drying to achieve even and smooth finish and applying two coat of distemper oil emulsion over a priming coat of chalk whiting complete all as specified and as directed.

M&L for preparation of wall surfaces and applying two coats of distemper oil emulsion using roller complete all as specified and as directed.

M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper using roller all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint over and including primer complete all as specified and as directed.

M&L for complete removal of existing treatment from old decorated walls including brooming down or by steel wire brushes, scrapping down smoke spot mould & efflorescent salt & greasy spots etc. and applying three coats of white wash complete all as specified and as directed.

All as per item serial No 16 here-in-before but on ceilings.

M&L for preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceilings and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceilings and applying two coats of distemper oil emulsion complete all as specified and as directed.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment from wall surfaces and applying 2mm thick (minimum) wall care putty over prepared surfaces including sanding of putty surfaces after drying to achieve even and smooth finish to receive paint complete all as specified and as directed.

M&L for complete removal of existing treatment from ceiling surfaces and applying 2mm thick (minimum) wall care putty over prepared surfaces including sanding of putty surfaces after drying to achieve even and smooth finish to receive paint complete all as specified and as directed.

M&L for preparation of old plastered or unplastered wall surfaces and applying one coat of cement base paint complete all as specified and as directed.

M&L for complete removal of existing treatment fom wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted surfaces of iron/CI pipes of any description exceeding 10cm in width or girth and applying one coat of black bituminous paint complete all as specified and as directed.

M&L for applying 2 mm thick (Minimum) wall care putty on new or old decorated surfaces to achieve smooth finish complete all as specified and as directed

M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specifed and as directed.

M&L for preparation of old decorated wall surfaces and applying one coat of acrylic emulsion, exterior grade paint complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistant as per IS 15489: 2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm all as specified and as directed.

M&L for preparation of old plastered or unplastered wall surfaces including cornices etc. and applying two coats of luster paint, interior grade complete all as specified and as directed.

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour including filling of cracks/holes by crack filler complete all as specified and as directed. Note: Model of mechanical sander shall be approved by GE.

M&L for applying water proof wall care putty (1.50mm to 2.00mm thick as required to make the surfaces smooth over prepared surfaces for desired smoothness and levelling of surfaces in two or more layers) including sanding of the putty surfaces after drying to achieve even and smooth finish surfaces for receiving painintg complete all as specified and as directed. Note: (a) Contractor shall inform to the Engineer-in-Charge/GE after preparation of surface and application of wall putty for site inspection and approval before applying further external finishes. (b) External finishes shall start only after approval of the prepared surfaces by Engineer-in-Charge/GE.

M&L for preparation of surface of new plastered wall surfaces and applying two or more coats of 100% premium exterior acrylic emulsion paint, Alkali & fungal resistance, dirt resistance, of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. Note: (a). Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces by using airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr. The spray machine shall be of reputed manufacturer with pro guard technology and capability of tracking pressure complete as approved by Engr-in-Charge/GE. (b). Allow 6-8 hrs to dry the surfaces for painting of subbsequent coats.

M&L for applying two or more coats of weather proof exterior acrylic emulsion paint, Alkali & fungal resistance, dirt resistance, of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed by Engr-in-charge. Note: (a). Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces by using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete as approved by Engr-in-Charge/GE. (b). Allow 6-8 hrs to dry the surface for painting of subbsequent coats.

Demoltion of cement concrete (unreinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

M&L for glazed coloured ceramic tiles of size 300 mm x 200 mm x 7mm / 450 mm x 300 mm x 7mm thick on vertical surfaces such as dado/skirting, laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Colour and design of tiles shall be as approved by GE.

S&F renewing tiles in patches area not exc 5sqm, light colour vitrified ceramic tiles, 8 to 9 mm thick (square / rectangular), area of each tile exc 0.36 sqm but n exc 0.42 sqm, shade as approved by GE in floor etc laid over and including 15mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed. Note: Colour and design of tiles shall be as approved by GE.

S&F renewing glazed tiles in patches, area n exc 5sqm each patch including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete Note: Colour and design of tiles shall be as approved by GE.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Colour and design of tiles shall be as approved GE.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Colour and design of tiles shall be as approved GE.

All as per serial item No.46 here in before but as in skirting laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square or rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm (600 mm x 600 mm) as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed.

All as per serial item No.48 here in before but as in skirting laid over and including 10 mm thick backing coat in cemrnt mortar 1:3 complete all as specified and as directed.

M&L for 8-9mm thick vitrified tiles, double charged, (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Colour and design of tiles as approved by Engr-in-charge.

All as per serial item No 50 here in before but as in skirting laid over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

Dismantling of stone slabs and stone tiles or interlocking tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and as directed.

M&L for 20-25 mm thick machine cut cudappah stone slab, laid over and including 20 mm thick bedding layer cement mortar 1:6 including roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for 20mm thick granite (of any type & color) table rubbed and polished as in steps, jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 10mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed. Note: Colour granite shall be as approved by GE.

Taking down chowkats or frames with shutters (without taking off shutters from the frames, area not exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames, area exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down shutter of any description, area exc 1 Sqm & not exc 2 Sqm each and refixing in the same opening after easing and adjusting etc complete all as specified and as directed.

Taking down shutter of any description, area not exc 1 Sqm each complete all as specified and as directed.

Taking down shutter of any description, area not exc 1 Sqm but not exc 2 sqm each complete all as specified and as directed.

S&F mild steel window/ventilator with pressed steel frame made out of 1.25mm thick steel sheet having two rebate with glazed shutters and fly proofing shutters with side hung shutters including projecting type hinges with steel handle, and steel peg stay with and without glazing bars dovetailed or welded complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, framed guard bars etc confirming to Fe 410-W Gde-E-250 quality-A with ends of bars shouldered and/or rivettd or forged into spikes and similar works including one shop coat of red oxide primer and fixed complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications & drawing all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawing all as specified and as directed.

S&F factory made solid panel PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded feathered edges plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour feathered edges PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable for feathered edges PVC sheet, and jointed together with solvent cement, suppling and fixing in the frame at site as per specifications & drawing all as specified and as directed.

S&F factory made solid panel PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded feathered edges wood grain printed PVC sheet used instead of plain colour PVC sheet & 5 mm thick x15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mmx 10 (90 degree) used instead of exposed portion of PVC sheet beading suppling and fixing in the frame at site as per specification & drawing all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet Polyurethane painted on the front face & 2mm prelam PVC sheet on back face , supplying & fixing to frame at site as per specifications & drawing all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangements complete all as specified and as directed.

S&F first class soft wooden beads, straight (any size ) for gauged joinery including mitres and removing old beads after tightening & nailing of wire mesh including two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed.

S&F 30 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkats complete all as specified and as directed.

S&F 35 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkats complete all as specified and as directed.

S&F 35 mm thick second class hard wood, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bar any numbers, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specifed in SSR Part 1, section 8, clause 8.24(a); supplied and fitted to chowkats all as specified and as directed.

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of pink primer complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Hacking out of old broken glass (any thickness, size quality or description and from any height) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane of any description complete all as specified and as directed.

S&F 3mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

M&L for welding work in repairs n. exc 2.5cm in length to n.exc 6mm thick of metal surfaces for window / ventilators, including hinges / bracket complete all as specified and as directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed with screws complete all as specified and as directed.

S&F 100 mm long stainless steel, butt hinges, medium weight and fixed with screws complete all as specified and as directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and as directed.

S&F aluminum handle, cast type, anodized, 125mm size complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F in repairs, 40 mm dia cupboard knobs fixed with nails, screw and washer of mild steel brass polished, bright finished complete all as specified and as directed

S&F in repairs, door stopper of aluminiam alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm all as specified and as directed.

S&F in repairs, magnate catches, brass body and striking plate including lettering and fixed with cupboard shutter complete all as specified and as directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and as directed.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and as directed.

M&L for 15mm dia UPVC pipes, pressure rating 10 kgf/cm2, laid in floors / trenches/fixed to walls including fittings (Elbow, Tee, FTA, Socket, reducer, solvent etc) complete all as specified and as directed.

M&L for 20 mm dia UPVC pipes, pressure rating 10 kgf/sqcm, laid in floors / trenches/fixed to walls including fittings (Elbow, Tee, FTA, Socket, reducer, solvent etc) complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth all as specified and as directed.

S&F in repairs, 15mm bore stop valve, angle valve of cast copper alloy, fancy type, chromium plated, long body (concealed type) high pressure screwed for iron pipe complete all as specified and as directed.

S&F in repairs, 15mm bore stop valve, angle valve of cast copper alloy, fancy type chromium plated, long body high pressure screwed for iron pipe complete all as specified and as directed.

S&F in repairs, brass chromium plated towel ring with bracket fixed wirh brass chromium plated screws complete all as specified and as directed.

S&F in repairs, 15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, 15mm bore brass chromium plated center hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, chromium plated Jet with flexible tube upto 1 metre long with stainless steel triangular plate fixed to european type water closet complete all as specified and as directed.

S&F in repairs, brass, chromium plated, health faucet, 15 mm bore of pipe including flexible connection pipe, complete all as specified and as directed.

S&F in repairs, soap dish, brass chromium plated, approximate size 160 mm x 100 mm x 90 mm, fixed to plugs with chromium plated brass screws & gutties, complete all as specified and as directed.

S&F in repairs, chromium plated, stainless steel grating doom, 100 mm dia with waste hole. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs, PVC connection, 15 mm size with PTMT nuts, 600 mm long, complete all as specified and as directed.

S&F in repairs, brass chromium plated swivel shower rose, 125mm size, including shower arm, fixed to steel pipe and union complete all as specified and as directed.

S&F in repairs, 15mm dia, bib taps, fancy type, long body, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screed for iron pipe or brass ferrule, complete all as specified and as directed.

S&F in repairs, two in one bib tap, chromium plated, cast copper alloy for fixing of Jet /hand faucet/health faucet including flange complete all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580mm X 440mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet (Pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed

S&F in repairs, vitreous china wash down water closet, one piece/ curatore cascade with cistern set and soft close glossy (white) seat cover complete all as specified and as directed. Make : Cera/Hinware/Jaquar/Parryware.or eqivalent as approved by GE.

S&F in repairs, sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including chromium plated coupling complete all as specified and as directed.

S&F in repairs, 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve and handle including brackets complete all as specified and as directed.

S&F in repairs for prefabricated stainless steel plate rack of size 900 x 600mmx 300mm made out of 1 mm thick stainless steel plate jointed with brass screws complete all as specified and as directed.

S&F in repairs PVC cabinet mirror size 600 mm x 450 mm as approved by GE all as specified and as directed

M&L for cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud etc from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve or provide new as applicable as etc complete all as specified and as directed.

M&L for cleaning of service tank upto 1000 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve or provide new as applicable as etc complete all as specified and as directed.

S&F in repairs, rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and as directed.

All as per serial item No 118 here in before but 1000 ltrs all as directed.

S&F in repairs, PTMT corner shelf in 3 tiers with chromium plated guard brackets fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repairs, PTMT shelf assembly with CP guard brackets and CP railings fixed with CP brass screws complete all as specified and as directed.

S&F in repairs, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

M&L for 25mm dia aluminium powder coated fancy type curtain rod with brackets and knobs at both ends as per site requirement including taking down old curtain rods with accessories complete all as specified and as directed. Note: The cost of end brackets & knobs shall deemed to be included in the quoted rate.

M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and as directed. Note : Work has shall be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specifications as approved by GE.

All as per serial item No 124 here-in-before but floor area of WC/bath-room/toilet exceeding 1.5 Sqm but not exceeding 3.0 Sqm.

S&F in repairs 32 mm dia semi rigid PVC waste pipe sink and wash basin with length not less then 700 mm complete all as specified and as directed

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

Fixing only in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S&F in repairs, 110 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, PVC (SWR) junction of 110 mm bore single, (single Y) equal or unequal with all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) pipes single sockted any length with rubber ring joints, fixed to walls complete all as specified and as directed

Fixing only in repairs, 75 mm dia PVC (SWR) pipes single sockted any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, PVC (SWR) junction of 75 mm bore single, (single Y) equal or unequal with all as specified and as directed

S&F in repairs, PVC (SWR) junction of 110 mm bore single, (single Y) equal or unequal with all as specified and as directed

S&F in repairs PVC (SWR) junction, 110mm bore, single, (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs PVC (SWR) junction, 75mm bore, single, (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs PVC (SWR) vent cowl, 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) vent cowl, 75mm bore complete all as specified and as directed.

S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

S&F pressed steel doors frames of size 105mm x 60mm x 1.25mm thick, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

S&F providing kitchen cabinet / Cupboard with sliding shutters in required size at site made out of 18 mm thick solid plastic wood board one side laminated and other side plain fitted to wall. The panels shall be fabricated using adhesive, screwed and secure as required. All edges shall be covered with 1.5 mm thick edges leaping tapes or 90 degree edge bent finish as per manufactures instructions complete all approved by GE and as specified and asdirected.

Supply, fabrication and fixing of kitchen cabinet / Cupboard back sides, partition and shelves made out of 18 mm thick solid plastic wood board plaint fitted with necessary arrangement fixed with screws / adhesives complete all approved by GE all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and as directed for one light point or one fan point controlled by one, one way switch. NOTE: (a). Proper colour coding shall be adopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black). (b). All points shall be earthed up to fixtures ie holders, tube lights, all lights, ceiling lights, bulkhead lights, bldg security lights etc.

All as per serial item No. 145 above but for one 3 pin socket outlet, 5 Amps on same board with other switches

All as per serial item No. 145 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 1.5 sq. mm size

All as per serial item No. 145 above but for one light point controled by two, two way switch

All as per serial item No. 145 above but for one bell point controlled by one bell push

All as per serial item No. 145 above but for one 3 pin socket outlet, 5 Amps on independent board with cables, 1.5 sq. mm size.

All as per serial item No. 145 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board.

All as per serial item No. 145 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 5/15 Amps, 230V, AC. all as specified & as directed.

S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F bell push, flush type, 5 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F switch piano, flush button, 5 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified & as directed.

S&F bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F in repairs, MCB, SPN 40 to 63 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.

S&F in repairs, single pole & neutral DB, 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, single pole & neutral DBs, 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F in repairs, MCB, SPN 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.

S&F LED tube light fitting 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5sqmm with complete with all as specified and as directed. Make: HAVELLS LED PRIDE ESSENTIAL Cat No LHEXAWP7IN1W020 or equivalent model of make Philips / Crompton/ Wipro.

S & F LED tube light fitting 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed. Make : HAVELLS LED PRIDE ESSENTIAL Cat No LHEXACP7IN1W010 or equivalent model of make Philips / Crompton/ Wipro.

M & L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed. Make of wire :- Havels,Finolex, RPG, Standard, HPL.

M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed. Make of wire :- Havels, Finolex, RPG, Standard, HPL.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and plate for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch complete all as specifed and as directed. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 172 here-in-before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No.172 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane, with cables, 1.5 sq. mm size

All as per serial item No. 172 here-in-before but on independent board.

All as per serial item No. 172 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 172 here-in-before but for one light point controlled by 2 way switches.

All as per serial item No. 172 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board.

All as per serial item No. 172 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size

S&F modular switch, piano type, 5 Amp, single pole, one way, flush type, white or ivory, ISI marked all as specified and as directed.

S&F modular switch, piano type, 15 Amp, single pole, one way, flush type, white or ivory, ISI marked all as specified and as directed.

S&F modular switch, piano type, 5 Amp, single pole, two way, flush type, white or ivory, ISI marked all as specified and as directed.

S&F modular bell push, piano flush type, one way, ISI marked all as specified and as directed

S&F modular socket outlet, 3 pin, 5 Amps, flush type, ISI marked all as specified and as directed

S&F modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI marked all as specified and as directed

S&F electric door bell, 230 V, multi music type, ISI marked all as specified and as directed

M.H Construction

AZAD SERVICES