Repair to certain roads in Tech area at Mil Stn Kanasar

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, depth exceeding 50 mm and not exceeding 100 mm, complete all as specified and as directed.

M&L for 75 mm thick (Compacted thickness) WBM with coarse aggregates of granite, trap or basalt stone of grading 2 (63 mm to 40 mm size) or of grading 3 (50 to 20 mm size), blended with screening of hard stone of grading ‘A’, spread, watered and rolled with 8 to 12 tonne power roller, hollows made up to form true surface and consolidated to required gradient and camber etc, complete all as specified and as directed

M&L for 150mm thick (Compacted thickness) WBM, in two layers (75 mm thick each layer) with coarse aggregates of granite, trap or basalt stone of grading 2 (63 mm to 40 mm size) or of grading 3 (50 to 20 mm size), blended with screening of hard stone of grading ‘A’, spread, watered and rolled with 8 to 12 tonne power roller, hollows made up to form true surface and consolidated to required gradient and camber etc, complete all as specified and as directed

M&L for preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc including sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 10 Kg per 10 Sqm, over paving WBM/WMM by sprayer operated hot pressure mechanism complete all as specified and as directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc including sweeping with brooms and finally fanning the cleaned surface free from dust with air compressor through air jet to remove loose dirt etc, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 5 Kg per 10 Sqm, over paving bituminous macadam complete all as specified and as directed.

M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt etc and applying evenly a premix/ tack coat of paving bitumen grade VG-10 at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated on hot pressure mechanism, Providing and laying spreading 30mm thick (consolidated thickness) of Premix Bituminous Concrete with crushed aggregates of grading 2 as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing with electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic paver finisher and rolling and consolidating to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed. Notes : (i) Paving bitumen of Grade VG-10 for premix/tack coat and bitumen of Grade VG-30 for Bituminous Concrete shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying bituminous concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item.

Description of serial item No. 6.00 contd…) (iii) Computerised print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor. (iv) The contractor shall quotes the rate against item considering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from MNIT Jaipur/ MBM Jodhpur/ Govt Engineering College/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Department and the same be submitted to the Accepting Officer for approval. Any variation in binder content on Minus side shall be adjusted @ Rs 50/Kg of binder and no adjustment shall be made on Plus side. (v) After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate.

M&L for providing, laying, spreading premix bituminous macadam with crushed and graded stone aggregate mixed together with 4% of paving bitumen of grade VG-30 by weight of total mix including heating bitumen to the required temperature, mixing bituminous macadam in automatic and temperature controlled hot mixing with electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic paver finisher and rolling and consolidating to the required gradient and camber (consolidated thickness 75 mm or less) with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed. Note : (i) The contractor shall quote the rate against item considering 4% VG-30 bitumen content. Job Mix Formula as per CIause No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out from MNIT Jaipur/MBM Jodhpur/ Govt Engineering Collage/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Department and same be submitted to the Accepting Officer for approval. Any variation in binder content on Minus side shall be adjusted @ 50/Kg of binder and no adjustment shall be made on Plus side. (ii) The bituminous macadam (BM) shall be covered with top layer/wearing course within in a maximum of 48 hours. If there is to be any delay by the contractor the course shall be covered by seal coat to the requirement of Clause 512 of MORTH (5th Rev) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately.

M&L for Thermo plastic road marking 2.5mm thick painting (lines, dashes, arrows, letters etc on new or previously treated road surfaces) with road safety spikeries glass beads including preparation of new or previously treated road surfaces and applying paint by using special applicator machine with heating arrangement complete all as specified and as directed.

M&L for Moorum / red bajri in road side berms or paving, rolled and consolidated to required gradient and camber using with 8 to 10 tonne mechanical power road roller including watering as in granular sub base and light wearing surfaces complete all as specified and as directed.

M&L for repairs to pot holes, not exc 1 square metre each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, on existing road surfaces, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm, putting in premixed bituminous macadam with crushed and graded stone aggregate mixed together with 4% of paving bitumen of grade VG-30 by weight of total mix, well rammed and sealed with binder 9.8 Kg per 10 sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exc 30mm, complete all as specified and as directed. Note : Job mix formula of premix bituminous macadam shall be approved by CWE.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

M&L for continuous Jodhpur stone slab edging, not less than 60-70mm thick, 15cm to 20cm wide (for depth of edging) and 60cm to 90cm long, laid dry vertically, jointing and pointing in CM 1:4, each stone slab self faced on both the vertical sides, edges slightly true and square on top edge, hammer dressed for the full thickness so that the depression from a straight edge held against the surfaces shall not exceed 20 mm between two joints of slab including necessary excavation and embedding stone edging to depth required and tamping ground around stone edging and also including spreading surplus soil on berms complete all as specified and as directed. Notes :- (i) The stone slabs shall be laid abutting to each other in such a way that thickness of edging is equal to thickness of stone slabs and depth of edging is equal to width of stone slabs. (ii) The stone slabs shall be obtained from “Chitter quarry” at “Jodhpur”. (iii) In case edging is laid on both sides of a road, each side of road shall be measured and paid for separately.

Ram Parkash Constructions Pvt. Ltd. (BID ID -3239193)