SPL REPAIR TO BLDG NO A-21 (SINGLE JCOs ACCN) UNDER AGE B/R-II OF GE SAUGOR

Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed. Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates. (ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder.

Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed. Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates. (ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening as per specification & drawing complete all as specified and directed.

S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 25m thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed.

S&F uPVC ventilator having provision for 250mm size exhaust fan with louvers in upper portion of ventilator and balance fixed with 5mm thick frosted glass including required rubber gasket, pins etc complete all as specified and directed.

S&F Factory made uPVG white colour Sliding window (area not exceeding 2.00 sqm each), Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. and 5mm thick glazing with selected quality glass, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: The unit rate quoted by contractor includes cost of glass, wire cloth and all other connected/ required accessories. Net Opening will be measured for payment purpose.

S&F factory made uPVC white colour casement (Openable) window (area not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. and required accessories complete all as specified and directed. Note: The unit rate quoted by contractor includes cost of all fitting and fixtures, glass, and all other connected accessories. Net opening will be measured for payment purpose

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed. Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates.

M&L for Second class hard-wood in scantlings, Timber framed and fixed, Clean sawn in repair complete all as specified and directed.