SUPPLY, INSTALLATION, COMMISSIONING OF 10 KVA DA SET FOR DETC/US ETC.

Special Eligibility Criteria

1. 1

   This item is reserved to be procured from firms having satisfactory past performance of same or similar item. Firm should have supplied 01 nos of same/similar item in past 3 years.

   Document requiredConfirmation required
2. 2

   Technical Specification attached in tender, special terms and conditions , QAP, Inspection terms and Drawing must be referred.

   Document requiredConfirmation required
3. 3

   This item is reserved to be procured through Class 1/ Class 2 local supplier as per clause 28.0 of Eastern Railway GTC.

   Document requiredConfirmation required

Commercial-Compliance

1. 1

   Warranty/Guarantee shall be as specified in relevant specification. Where ever this clause is not covered in the specification, IRS Warranty/Guarantee clause will apply. Warranty/ Guarantee: 24 months from the date of commissioning.

   Document optionalConfirmation required
2. 2

   REPLACEMENT OF PARTS & ACCESSORIES DURING WARRANTY/GUARANTEE PERIOD: During this period all defective parts and accessories shall be replaced promptly free of cost to the customer & such replaced parts shall further carry the same guarantee.

   Confirmation required
3. 3

   The supplier shall depute their service engineer during the guarantee period to render free service immediately on receipt of call from the consignee.

   Confirmation required
4. 4

   After Sales Service: Shall be provided by the firm through their expert team of technicians.

   Confirmation required
5. 5

   Guarantee/Warranty certificate is required to be submitted at the time of supply of material

   Confirmation required
6. 6

   Demonstration and Training: The supplier shall demonstrate the working of the machine and shall fully and adequately train the operator and maintenance personal of the consignee free of cost.

   Confirmation required
7. 7

   Bidders should go through the Tender Documents consisting of Instructions to Tenderers, General Tender Conditions and Special Conditions of Tender and should agree and confirm to abide by the Instructions to Tenderers, General Tender Conditions, IRS Conditions of Contract and the Special Conditions of Tender.

   Confirmation required
8. 8

   Bidders must upload the Performance Statement supported by copies by Purchase Orders, Receipt Note, commissioning report and Inspection Certificates as per attached special terms & conditions.

   Document requiredConfirmation required
9. 9

   Bidders must keep their offer valid for a minimum period 90 days from the Tender closing date other wise offer will be rejected as per GTC.

   Confirmation required
10. 10

    Tenderers should mention MAKE/MODEL with their offers. Offer without particulars of MAKE/ MODEL liable to be summarily rejected

    Document requiredConfirmation required
11. 11

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the general tender condition clause 28.0. Please also mention the country of origin.

    Document requiredConfirmation required
12. 12

    Place of delivery: SSE/Crane Shop-2, Locomotive Workshop/E. Rly., Jamalpur, Munger, Bihar.

    Confirmation required
13. 13

    Earnest Money Deposit: EMD amount shall be as per "Instruction to tenders of e- tenders under section - 1" of ER General tender Condition Clause no.8.

    Confirmation required
14. 14

    Security Deposit : as per clause no 9.1.1 to 9.3.0 of General Tender conditions shall be applicable.

    Confirmation required
15. 15

    In case of Import materials documents for Country of Origin, Bill of Lading/ Bill of Entry etc. to be submitted by the supplier along with supply of materials for genuineness of the items.

    Confirmation required
16. 16

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Other Conditions

1. 1

   By TPI at manufacturer premises as per technical specification attached with tender and inspection chart.
2. 2

   Printed Technical Literature with detailed specification of the offered model /equipment to be uploaded alongwith the offer, if applicable.

   Document optionalConfirmation required
3. 3

   All other terms and conditions as per General tender conditions .

   Confirmation required
4. 4

   GST: (A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate. (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se-ranking. While submitting offer, it shall be the responsibility of the Bidders to ensure that they quote correct GST Rate and HSN number. (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST Rate if quoted by Bidders. (D) Whenever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST Rate which is lower of the GST rate incorporated in the Purchase Order or billed. (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the Purchase Order. (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

   Confirmation required
5. 5

   Manufacturer/Suppliers Trade Mark along with Year and Month of Manufacture to be embossed/Marked on the product/Boxes/Cartons as stipulated in Specification /Drawings.. Test certificate of the ordered materials and Guarantee/Warrantee Certificate of the ordered materials are to be produced at the time of Inspection and supply. Technical literature to be submitted by the bidder along with offer failing which the offer will be treated as rejected. F.O.R. free of destination

   Document optionalConfirmation required

1. 1

   Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.

2. 2

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

3. 3

   Firm must quote all inclusive rate as per basic machine cost, spares, installation and commissioning as mentioned in attached annexure.CAMC is not covered in this tender.

4. 4

   All the Latest norms issued by Central Pollution Control Board (CPCB) must be complied.