REPAIR TO PVC WALL PANELING, FALSE CEILING, ALUMINUM PARTITION IN CERTAIN BR WORKS IN ZONE-II AT MIL STN JAISALMER

Amount

Taking down chowkats or frames (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

S&F Powder coated Aluminium anodised frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed by Engineer-in-charge.

S&F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed by Engineer-in-charge.

S&F in repair Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed by Engineer-in-charge.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed by Engineer-in-charge.

S&F in repair 5.5mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

S&F in repair solar control film 50 micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified & directed by Engineer-in-charge.

S&F in repair Aluminium anodised butt hinges 125mm long complete all as specified & directed by Engineer-in-charge.

S&F 100mm brass 4 Levers mortice lock vertical type complete all as specified & directed by Engineer-in-charge.

S&F in repair 100mm brass 4 Levers mortice lock vertical type complete all as specified & directed by Engineer-in-charge.

S&F in repair Aluminium (Die cast) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg complete all as specified & directed by Engineer-in-charge.

S&F in repair mild steel 300mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed by Engineer-in-charge.

S&F in repair megnatic catch for cup board shutter complete all as specified & directed by Engineer-in-charge.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engineer-in-charge.

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified & directed by Engineer-in-charge.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified & directed by Engineer-in-charge.

M&L for Providing, precast cement concrete in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engineer-in-charge.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in flooring complete all as specified & directed by Engineer-in-charge.

M&L for vitrified ceramic tiles light shade /double charged/ultra charged as directed, 10mm thick (square /rectangular ), coloured, polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm ( actual size of tile shall be 600x 600x8mm thick), in floors etc. set with and incl provison of suitable chemical adhesive of 3mm thickness (usage of adhesive shall not be less than 3 Kg/ sqm ) and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles & floor tiling incl chemical over including screed bed or bedding layer of 15mm thick in CM (1:4) complete all as specified & directed

M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over including screed bed or bedding layer of 15mm thick in CM (1:4) complete all as specified & directed.

S&F glazed ceramic coloured tiles of size 450mmx300mmx 7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick walls , including racking out Joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-charge.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for two coats of oil bound distemper on newly plastered surfaces over a coat of chalk whiting , including preparation of surfaces complete all as specified & directed by Engineer-in-charge.

M&L for two coat of cement base paint on newly plastered surface incl a coat of alkal resistant primer complete all as specified & directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified & directed by Engineer-in-charge.

S&F anodised aluminium snap grid frame work 600x600mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed by Engineer-in-charge. Note :- Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm.

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified & directed by Engineer-in-charge.

Supply only Integral water proofing compound complete all as specified & directed by Engineer-in-charge.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet wood grain printed inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down of existing wall panelling and similar work complete all as specified & directed by Engineer-in-charge.

S & F in repairs, 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed.

M&L for 75 mm thick cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified & directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.

S & F in repair Steel rolling shutter ( thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated and including taking down of any thickness etc, complete push pull or manual type complete all as specified & directed by Engineer-in-charge.

S & F in repair Steel rolling shutter ( thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, and including taking down of any thickness etc, complete gear operated type with bevel gear box and crank handle complete all as specified & directed by Engineer-in-charge.

M&L for oiling and greasing to the MS shutters by removing the scales and to make the shutters swing freely complete all as specified & directed by Engineer-in-charge.

Repairs to MS door shutter weighing 750-1000 kg to swing freely which obstructing the movement due to pintel hinges is inclined inner words to align the shutter by means of hammering/welding/oiling /lifting the shutter by means of pully or crane by taking saftey measures complete all as specified & directed by Engineer-in-charge.

S&F in repairs MS wheel of size 125mm dia and 32mm thick to the bottem of MS shutter by welding /nut & bolting by taking fire safety precautions complete all as specified & directed by Engineer-in-charge.

Taking down unserviceable rolling shutters of any descrioption any size height upto 4 meters complete all as specified & directed by Engineer-in-charge.

Taking down unserviceable rolling shutters of any descrioption any size height more then 4 meters complete all as specified & directed by Engineer-in-charge.

S&F steel rolling shutters without ball bearig as specified incl top cover, anchoring rod, Hasp and stapple and one shop coat of primer, erected in position as indicated, complete push pull or manual type using 1.25 mm thick laths complete all as specified & directed by Engineer-in-charge.

All as per item 46.00 above but gear operated type with bevel gear box and crank handle.

S&F Ball bearing for rolling shutter complete all as specified & directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.

S&F in repairs rolled mild steel framed work as in door or gates of angle or other section confirming to Fe 410-W grade B with gusset plates, rail braces etc complete incl taking downdrilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified & directed by Engineer-in-charge.

S&F in repairs safety lever lockers mild steel with 4 levers for rolling shutters complete all as specified & directed by Engineer-in-charge.

S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample complete all as specified & directed by Engineer-in-charge.

S&F in repair Brackets powder coated fancy type for drapery rod complete all as specified & directed by Engineer-in-charge.

Repair of steel window shutter not exc 1.5 Sqm each by replacing projected type unserviceable hinges, with welding new hinges or welding of existing broken hinges and handles to window frames and easing of shutters to proper closing with oiling to hinges and painting at welded portion to match the existing surfaces each complete all as specified & directed by Engineer-in-charge.

All as per item No. 53.00 above but ventelator shutter not exc 1 Sqm each.

Resecuring or easing and adjusting shutters of any description exc 1 Sqm and not exc 2 Sqm each without taking down of sutters complete all as specified & directed by Engineer-in-charge.

Supply and fix in repair Aluminiumn anodised barrel tower bolts 200mm length of extruded section complete all as specified & directed by Engineer-in-charge.

Supply and fix in repair Aluminiumn anodised barrel tower bolts 125mm length of extruded section complete all as specified & directed by Engineer-in-charge.

S&F in repair Aluminium alloy, anodised, sliding door bolt plate with hasp and staple (bolt type), 300mm size and fixing in clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed by Engineer-in-charge.

S&F in repairs butt hinges 100mm size medium weight cold rolled ms in any type of chowkat or frame including welding if required complete all as specified & directed by Engineer-in-charge.

S&F in repairs butt hinges 75mm size medium weight cold rolled ms in any type of chowkat or frame including welding if required complete all as specified & directed by Engineer-in-charge.

S&F in repairs 300mm, ordinary rat tail rod pattern springs, including roller and rooler plate complete including welding if required for fixing in case of pressed steel chowkat complete all as specified & directed by Engineer-in-charge.

S&f in repairs 150mm size extruded aluminium alloy handles fabricated type, anodised complete all as specified & directed by Engineer-in-charge.

S&f in repairs 100mm size extruded aluminium alloy handles fabricated type, anodised complete all as specified & directed by Engineer-in-charge.

Repair of aluminium shutter of any description and size including taking out the shutters and refixing in the same opening and easing of shutters to proper closing with oiling to hinges, floor springs etc all as specified and as directed by Engr in charge

M&L for steel door stoper double shoe fixed in door shutters all as directed fixed in repairs complete all as specified & directed by Engineer-in-charge.

S&F in repair steel window handle left and right complete fitting complete all as specified & directed by Engineer-in-charge.

S&Fin repair steel window stopper peg stay complete complete all as specified & directed by Engineer-in-charge.

S&F in repair Steel lock with two keys as per Godrej pattern complete all as specified & directed by Engineer-in-charge.

S&F in repair 3mm thick looking glass for built-in almirah complete all as specified & directed by Engineer-in-charge.

Dismantling (AC corrugated , semi corrugated etc ) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.

S&F in repair Mild steel barrel tower bolts 300mm , stove enamelled black, with bright bolt and fixed complete all as specified & directed by Engineer-in-charge.