Construction of 50 New Residential Houses at CHC at Jakhal in Distt. Fatehabad. (Pdg. E.I only) RECALL

Amount

Main Switches: HSR 31.12 (a) : Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . (v) Double pole switch 32 amp. 415 Volts Cat-B.

(xiv) Triple pole switch with neutral link 32 amp. 415 Volts Cat-B.

(xv) Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

(xvi) Triple pole switch with neutral link 100 amp. 415 Volts Cat-A

HSR 31.13: Supply & erection of MS angle iron frame duly welded for housing MS sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide (ii) Size 40 mm x 40 mm x 6 mm

HSR 31.14 (i) M.S. Sheet: Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

(K) Distribution board with plug and socket. HSR 31.15: Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (ii) S.P.N. enclosure for single pole MCB 20 amp.

HSR 31.16: Blanking Sheet: (i) Supply and erection of blanking sheet in existing distribution board.

(L) Miniature Circuit Breaker and Isolator.: HSR 31.17: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (ii) SP MCB 6 amp. To 32 amp

(iii) SPN MCB of 6 amp. To 32 amp.

(vi) TPN MCB 6 amp. to 32 amp.

(x) TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories.: HSR 31.18 (M) (vii) Call bell 220/230 Volt A.C. Bakelite with double coil.

(ix) (b) Bell push flush type ( without flexible wire ) in existing sheet.

(xi) Bakielite angle/ straight button holder large size

(xii) Switch 5 amp. On existing sheet.

(xiii)Wall socket 5 amp. On existing sheet.

(xxvi) Supply and erection of hexegonal M.S. box 1.60 mm thick having each side 8 cms, 7.5 cms deep, top covered with M.S. lid by means of screws including 10mm dia 30cm long mild steel rod made into suitable suspension hook and erected in R.C.C. slab for erection of fan, the bottom covered with 3mm thick bakelite sheet with suitable holes, painting etc. complete with all labour and material required to complete the job.

Erection and carriage of fans.: HSR 31.20 (O) (i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station/Goods transport/PWD store to the site of work

(iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

(v) Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick

Pipe Laying.: HSR 31.21 (P) Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

(xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

(xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) (b) Size 20 mm dia.

Earthing: HSR 31.22 (Q) (i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

(xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Miscellaneous .HSR 31.35 (X) (vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of Bakelite sheet.

PVC Insulated wiring in recessed conduit. : HSR 31.36: Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. i Fan Poin (b) Medium Point

c) Long Point

Light Point : a) Short Point

b) Medium Point

c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long Point

HSR 31.40: S/E of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. i) Cable size 1.5 sqm(3/0.81 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. ii) 8-way, SP&N (Horizontal)

iii) 12-way, SP&N (Horizontal)

v) 4-way,TP&N (Horizontal)(8+12)

vii) 12-way,TP&N (Horizontal)(8+36)

HSR 31.44: S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. b) 25mm dia

HSR 31.47: S/E of MS box of size of 200mmX150mmX100 mm deep covered with Bakelite sheet including cost and flushed erection of 32 A DP switch, 15A socket and switch with necessary connections complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

HSR 31.55: Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Deluxe model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. upto the entire satisfaction of the Engineer-in-Charge of the work.

M/S SHIV ELECTRICAL AND CONSTRUCTIONS