Development of temporary structures at SWTS ITBP Damoh MP As tender form

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Ordinary rock

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with Jamuna sand under floors i/c, watering ramming consolidating and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand :4graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinthlevel :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal sizederived from natural sources.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering i/c strutting propping etc. and removal of form for: Foundations, footing, bases of coloumns etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform

Reinforcement for R.C.C work i/c straightening, cutting, bending, placing in position and binding all complete. Thermo- Mechanically Treadted bars.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with F.P.S. bricks of class designation 75 infoundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 1 Using flats 30x6mm for diagonal braces and central cross piece.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Cement concrete flooring 1:2:4 ( 1 Cement : 2 Coarse sand ; 4 garded stone aggregate) finished with a floting coat of neat cement i/c cement slurry, but excluding the cost of nosing of steps etc. complete: 40mm thick with 20mm nominal size stone aggregate

P/f glass strips in joints of terrazo/cement concrete floors. 40mmvide and 4mm thick

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion1/17/2024 : Single pushfit Coupler , 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion1/17/2024: Single tee with door size 110x110x110 mm

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required ;Roof

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Crimp curve

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

15mm cement plaster of mix : 1:4(1cement:4 C/ sand)

12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and applying wall putty of 2 mm thk over plastered surface to prepare the surface even and smooth complete.

finishing walls with water prooffing cement paint of requried shade: New work ( Two or more coats applied @ 3.84 kg/10sqm)

Finishing walls with Acrylic smooth exterior paint of required shade:New work (three or more coats)@1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works sqm 55.50

painting with synthetic enamel paint of apaproved brand and manufactory to give an even shed, two or more coats on new work

Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade :Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture on steel surface section and truss.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps,32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require : White Vireous China Wash Basin size 630 X 450 mm with a single 15mm C.P. brass pillar tap

P/f P.V.C waste pipe for sink or wash basin I/c P.V.C waste fittings complete. Flexiable Pipe. 40mm dia

P/F 600 X450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. Brassscrews and washers complets

P/F Soil , waste and vent pipes 100 mm dia. certrifugally cast (spun) iron socked pipe as per IS : 3989

P/F bend of required degree with access door , insertion ruber washer 3mm thick , bolts and nuts complete. 100 mm Sand cast iron S&S as per IS-3989

Providing lead caulked joints to sand cast iron / centrifugally cast (spun iron pipes and fitting of diameter: 100 mm dia

P/F trap of self cleansing design with screwed down or hinged grating with or without vent arm complete , I/c cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outletSand cast iron S&as per IS : 3989

Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS : 3989

P/f G.I pipes comple with G.I fitting and clamps including cutting and making good the walls etc. internal work- Exposed on wall 15mm dia nominal bore.15mm dia nominal bore

P/f G.I pipes comple with G.I fitting and clamps including cutting and making good the walls etc. internal work- Exposed on wall

P/F G.I. Pipes complete with G.I.fitting I/c trenching and refilling etc. external work. 20mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. xternal work 65 mm dia. nominal bore

Making connection of G.I. Distribution branch with G.I. Main of following sizes by P/F tee cuutting and threqading the pipe etc complete. 25 to 40mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 25mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) :65 mm nominal bore Vertical

P/F uplasticised PVC connection pipe with brass unions. 45 cm length. 15mm dia nominal bore

Painting G.I. pipes and fittings with synthetic enamel white paint overa ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe

Painting G.I. pipes and fittings with synthetic enamel white paint overa ready mixed priming coat, both of approved quality for new work : 20 mm diameter pipe

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :25 mm diameter pipe

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :50 mm diameter pipe

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :65 mm diameter pipe

P/F sand of grading zone V or coarser grade all round the G.I.pipes in external work. 20mm diameter pipe

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. 25 mm diameter pipe

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. 50mm diameter pipe

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. 65 mm diameter pipe

P/F G.I Union in G.I. Pipe including cuting and threading the pipe and making long screws etc. complete. 15 mm nominal bore

P/F G.I Union in G.I. Pipe including cuting and threading the pipe and making long screws etc. complete 20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 50 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 65 mm nominal bore

P/P on terrace (at all floor levels ) polythylene water Storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, out let overflow pipes but without fitting anfd the base support for tank.

P/F C.P. brass bib cock of approved quality conforming to is : 8931. 15mm dia nominal bore

P/F C.P. brass stop cock of standard design and of approved make conforming to IS:8931. 15mm dia nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm dia nominal bore

P/f C.P PTMT Ball cock of approved quality colour and make complete with Epoxy coated aluminiumn rod with L.P./H.P.H.D. Plastic ball. 25mm nominal bore, 152mm long.Weighing not less than 440gms

Providing & Fixing G.I Reducer Socket with necessery fittings etc: 65x 50 mm nominal bore

Providing & Fixing G.I Reducer Socket with necessery fittings etc: 50x 25 mm nominal bore

Providing, laying and jointing glazed stoneware pipes grade ‘A’ withstiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1fine sand) including testing of joints etc. complete : 200 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) all-roundS.W. pipes including bed concrete as per standard design: 200 mm dia SW pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90X80 cm and 45 cm deep I/c C.I cover with frame (light duty) 455 X 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). with F.P.S.bricks with class designation 75

Extra for depth for manholes. Size 90 X 80 cm. with F.P.S.bricks with class designation 75

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Making connection of drain or sewer line with existing manhole I/c breaking into and making good the walls , floors with cement concreate 1:2:4 mix (1 cement : 2coarse sand : 4graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement :3coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: For pipes 250 to 300 mm diameter

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line:

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With F.P.S. bricks

Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm.

Supplying and installation of 1.1 KV grade 4 Sqmm 3 core Copper Conductor submersible cable from submersible pump to panel of make Poly cab/L&T/Havells/Finolex.Heavy Duty approved brand all as per requirement and direction of Engineer-in-charge

Providing and Fixing Out door floor rested front operated, Starter panel as per the given specification fabricated from 14 SWG (2.0mm) M.S. Sheet for enclosure, Door, and partition as per requirement of size HxWxD 800x800x300 mm, with powder coating RAL 7032 Shade suitable for 5HP SUBMERSIBLE pump with all inside fittings and connection required with submersible pump as per direction of Engineer in charge : MS Stand fabricated from MS Angle of (Size 35x5 mm) of hight 1000mm. - 01 No, Copper Bus bar (size 30x3 mm) for main and connector of specified rating with color code heat shrinkable sleeves. :- 01 Set, MCB 63 A TP 10 kA :- 01 No , MCB 32A TP 10 KA :- 02 Nos . Star Delta Starter suitable for 05 HP (MN 16) :- 02 NOs . LED type phase indication lamp :_ 01 set. 6 amp Control SP MCB:- 03 Nos. Digital multifunction lamp :- 01 No, Digital Amphere meter :_ 02 Nos , Digital Voltmeter - 02 Nos, Single phase preventer - 02 Nos, Current Transformer meter 60/5 5 VA Class I :- 03 Nos, Tringular Type Door locks with key - 01 No, Concealed Hinges, Wiring (Single Core multi Strand copper wire of respective currents ratings) , Lugs and other insulation : - As required, MCB Channel and terminal block and PVC channel for wiring , Other Miscelleneous hardware

Providing and Installating 5HP Horizontal Open well submersible Pump of suitable RPM, 415 volt, 50 Hz, 3 Phase A.C. Supply complete with all accessories in all respect - 1- Total head 24-30 Mtr 2- Discharge - 11.3 to 9.2 lps or as per direction of Engr-in-charge. 3- Reqd. HP - 5HP (As per pump manufacturer) 4- Make - Kirloskar/ Crompton/Franklin 5- Suction pipe size - 65 mm 6- Delivery pipe size - 50 mm Note:- (1) The Horizontal open well submersible pump set to be installed inside the water tank with G.I Pipe and including neccessery fittings & joints as required for installation . (2) Pump shall be capable of operating as per given Head and discharge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Supplying and fixing of 25 W LED Tube Light Fitting complete 4ft size including connection ,ceiling rose, PVC box etc complete

Wiring for main with 10 Sqmm size of weather proof twin core aluminium conductor cable on GI Bearer wire etc as requires including conection etc complete

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 06 way , Single door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required1/17/2024: Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required1/17/2024:Double pole

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Earthing with G.I. earth plate 600mmx 600mmx 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangment and watering pipe of 2.7 meter long etc with charcoal/ cock and salt as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25mmx5mm G.I strip in 40 mm dia G.I pipe from earth electrode including connection with G.I nut, bolt, spring, washer, excavation and re-filling etc as required.

SANWARIYA CONSTRUCTION

CbS Technologies Pvt.Ltd