Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹51.8 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L-1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L-2₹56.1 L+₹4.4 L (8.41%)Rejected-Finance H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L-2 | Rejected-Finance Not being lowest bidder | |
| 3 | L-3₹57.1 L+₹5.4 L (10.4%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L-3 | Rejected-Finance Not being lowest bidder | |
| 4 | L-4₹61.1 L+₹9.3 L (18.0%)Rejected-Finance | L-4 | Rejected-Finance Not being lowest bidder | |
| 5 | L-5₹61.9 L+₹10.2 L (19.6%)Rejected-Finance | L-5 | Rejected-Finance Not being lowest bidder |
Tender Value
₹74.9 L
EMD Value
₹1.4 L
Closing Date
9 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bathinda
HQ CWE Bathinda Bathinda Mil Stn
PROVN OF CERTAIN SANCTIONED WORKS (PART-I) UNDER AGE B/R-II UNDER GE (S) BATHINDA AT BATHINDA MIL STN
2023_MES_631013_1
CWE BTD/TOKEN-25/2023-24
Open Tender
Civil Works
Item Rate
270 days
Bathinda Mil Stn
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (South) Bathinda
₹1.4 L
HQ CWE Bathinda
16 Feb 2024
4 Dec 2023
11 Jan 2024
4 Dec 2023
9 Jan 2024
26 Dec 2023
11 Dec 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and directed.
Removing surplus excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Removing surplus excavated material exceeding 250m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Material and Labour for hard core of broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm, deposited, spread, and levelled in layers not exceeding 15cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.
Material and labour for cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed.
Material and labour for cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors as in boundary pillars and posts including caps and bases complete all as specified and as directed.
Material and Labour for mild steel work in tubular trusses, tubular/rectangular MS pipe such as vertical post, trusses, rafter, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
Supply and fixing Red colour Pre- painted galvatume sheet of CRIMP Profile (Curved Section) aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Material and Labour for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in kerb stone, manhole covers, kitchen sink slab etc with plain fair faces including chamfers, atherings,throating etc. and setting in mortar set in cement mortar (1:6) complete all as specified and as directed.
Material and Labour for Extra for forming fair finished drain or channel not exceeding 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed .
Material and labour for cement concrete (1:2:4) type B-0, using 12.50 mm graded stone aggregates as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and as directed.
Material and labour for Brick work with fly ash old size bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.
Material and labour for Brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing fair & even mixed with water proofing compound as per manufacturer's instructions but without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and Labour for formwork for rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
Material and Labour for formwork for rough finish surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.
Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed.
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and as directed.
Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and as directed.
Material and Labour for formwork to (rough finished surface of concrete) edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 05cm but not exceeding 10cm wide complete all as specified and as directed.
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for RCC M-25 design mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and in chajja etc complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
All as per item No 34 here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed.
Material and labour for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of of alkali resistant priming paint complete all as specified and directed.
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified and directed.
Material and labour three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of appropriate primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface complete all as specified and as directed.
Material and labour for 25 mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floor finished even and fair without using extra cement complete all as specified and as directed.
Material and labour for 75 mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. finished even and fair without using extra cement complete all as specified and as directed.
Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.
Material and labour for PCC 1:3:6 type C1 (using 20mm graded crushedstone aggregates) as in filling back of pressed steel door frames/chowkhats and for fixing hold fasts, etc. complete all as specified and directed.
Supply and fixing Pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified and directed (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micorn) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., minimum thickness of powder coating 50 micron complete all as specified and directed . Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after ascertaining the actual weight of aluminium at site.
Supply and fixing powder coated Anodised aluminium(minimum thickness of powder coating 50 micorn) window and ventilator shutter, glazed side/top hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, luminum snap beading screws, screws, anodised aluminium fittings such as peg stay 150mm long (1 No), hinges type B-21 100mm long ( 2 Nos), suitable size handle ( 1No) complete all as specified complete all as specified and directed .
Supply and fixing Factory made steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as speciofed.
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
S & F 5.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing 5.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fixing MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.
Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.
Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2020) and all as shown on drawing of SSR Part-II (2020) complete all as specified and directed .
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 149. complete all as specified and as directed.
Supply and fixing extruded aluminium anodised type B-21, 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed .
Supply only mild steel Butt Hinges, 100 mm size, heavy weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
Supply and fixing aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed .
Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified
Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified
Supply and fixing aluminium anodised handles, 100 mm long, cast type, (ISI marked) complete all as specified and as directed .
Supply and fixing aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .
Supply and fixing aluminium anodised handles, 150 mm long, cast type complete all as specified and as directed .
Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black complete all as specified and as directed
Material and labour for preparation of roof/wall concrete/plastered surfaces and applying a coat of cold bituminous primer over cleaned plastered surface @ 0.30 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.50 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by any manufacturer as per list of make in tender documents approved by GE, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and directed.
Material and labour for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set, jointed and pointed in neat cement slurry @ 3 Kg per Sqm in floors,with grey cement and pigments and cut and polished over and including Material and labour for 15mm thick screed bed in CM (1:4) mixed with liquid water proofing compound as per manufactureer's instructions as on roof top surfaces, of finish even and fair without using extra cement complete all as specified and directed. Note:- (i) Only toka sand will be used as coarse sand in this item. (ii) WPC shall be measured and paid separately under appropriate item of this BOQ.
Supply and fixing Vitreous china under counter wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed . Note:- Labour for fixing pillar tap is included in quoted rate. Nothing extra shall be paid on this account.
Supply and fixing Vitreous china wash hand basin, white, flat back, size 450 x 300 mm including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed . Note:- Labour for fixing pillar tap is included in quoted rate. Nothing extra shall be paid on this account.
Supply only 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
Supply and fixing PVC connection 15 mm size with PTMT nuts on both ends and washers length 600mm of approved quality complete all as specified and directed.
Supply and fixing brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and directed.
Supply and fixing vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including material and labour for lime concrete with 40mm graded stone aggregate with lime mortar 1:3 complete all as specified and directed.
Supply and fixing PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing vitreous china bowl type Urinal, flat back typeof size 465 mm x 355mm x 265mm, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and pointing around urinal back in cement, grating and union for discharge etc. complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed .
Supply and fixing vitreous china urinal, half stall type, white excluding flushing cistern but including flush pipe, and waste pipeand also including connections to flushing pipe and outpipes, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing arount urinal back in cement complete all as specified and directed .
Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed .
Supply and fixing tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed.
Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.
Supply and fixing chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .Note :- The minimum weight shall be as given in SSR or in relivent IS.
Supply and fixing fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .Note :- The minimum weight shall be as given in SSR or in relivent IS.
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .
Supply and fixing fancy type chromium plated stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing chromium plated with long shank and cup ( concealed type) stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .Note :- The minimum weight shall be as given in SSR or in relivent IS.
Supply and fixing 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specifed and directed.
Supply and fixing 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specifed and directed.
Supply and fixing 75 mm bore PVC (SWR) bend any type complete all as specifed and directed.
Supply and fixing 75 mm bore PVC (SWR) tee any type complete all as specifed and directed.
Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specifed and directed.
Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
Material and labour for 10 user 2000 ltrs capacity FRP moulded Anaerobic Septic Tank for an anaerobic design in which bacteria treats waste under most favourable conditions, process effectively prevents rapid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet- outlet short circuit of wastewater which is prevented to ensure longg and enough retention time for effective treatment, thus the effluent dose not contain any solid or scum that could clog up the pipe line.The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the bottom of the septic tank (known as sludge). The liquid wastes are also held in the septic tank while bacteria break down solids into liquids in an anaerobic environment, process is know as primary treatment some bacteria and viruses are adsorbed onto solid particles and held in the sludge or scum layers, allowing for limited removal of disease causing organisms at the stage. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided and tank is ready to use incl PCC 1:4:8 below foundation and vent shaft connection, including excavation, returning and filling, removal of excess soil, connection to existing sewage line incld site clearance etc.complete all as specified and directed by Eng-In-Charge.
Material and labour for Soakage well of size 1.8 Mtr dia x 3.0 mtr effective depth complete as Excavation ,returning filling and removal, Concrete work PCC (1:4:8) Type D2 using 40mm graded stone aggregate, Brick work in CM 1:4 using with Burnt clay sub class ‘B’ bricks , Honey combing brick work in CM 1:3 using with brunt clay sub class ‘B’ bricks , Brick bats of broken burnt clay brick aggregates of size 40mm to 80mm and 80mm to 150mm ,15mm thick Rendring in cement mortar 1:4 with using water proof compound , Reinforced cement concrete work in M-25 (Design mix) ,Reinforced Concrete pipe Class NP3 of 200mm , Bed of cement concrete for Reinforced Concrete pipe Class NP3 of 200mm in PCC 1:4:8 Type D2 using 40mm graded stone agreegates with packing under and haunching against the sides of pipies , PVC pipe 110mm bore for inlet and outlet,PVC Cowel shall be 75mm,TMT Reinforcement all as specified in particular specifications Section-II in clause 42.00 and as per drawing shown on serial page no.175 of tender documents. Note: The cost of material and labour to construct and to make the soakage well fully functional is included in this item and nothing shall be paid extra on this account.
Supply and fixing Salt-glazed stoneware drain pipes 150mm bore (internal) of grade 'A' laid in trenches and jointed etc. complete all as specified and directed .
Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW/RCC) drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed . Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.
Supply and fixing reinforced concrete pipes, class NP3 of 200mm dia bore , laid in trenches and jointed complete with collars all as specified and directed .
Supply and fixing cast iron spun soil waste and vent pipe 75mm bore with or without ears fixed with cement joints laid in trenches/floors complete all as specified and directed.
Supply and fixing cast iron spun soil waste and vent pipe 100mm bore with or without ears fixed with cement joints laid in trenches/floors complete all as specified and directed.
Supply and fixing Cast iron spun soil waste and vent pipe 75mm bore with or without ears fixed with cement joints fixed to walls complete all as specified and directed.
Supply and fixing Cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with cement joints fixed to walls complete all as specified and directed.
Supply and fixing 100mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
Supply and fixing 100mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.
Supply and fixing 100mm bore Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply and fixing 75mm bore Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply and fixing 100mm bore Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
Supply and fixing 75mm bore Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
Supply and fixing 100mm bore cast iron cowl fixed with cement joint in cement mortar (1:2) complete all as specified and directed.
Supply and fixing 75mm bore cast iron cowl fixed with cement joint in cement mortar (1:2) complete all as specified and directed.
Supply and fixing 100mm dia grating doom of PTMT having minimum weight 25gm complete all as specified and directed.
Supply and fixing cast iron floor trap, 100mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.
Supply and fixing cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.
Material and labour for Salt-glazed stoneware gully traps of size 150mm x150mm, square or round mouthed, type 'S' including squre chromium plated 150 mm dia grating complete all as specified and directed by Engineer-in-Charge.
Material and labour for non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed .
Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces such as skirting/dados and riser to steps etc of size 450mmx300 mm x7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including rendering 10mm thick plaster in CM 1:4 for rough finish to receive tiles on vertical surfaces complete all as specified and directed.
Material and Labour machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) of 60 mm thickness of M-35 grade with grey cement & pigment complete all as specified and directed .
Material and Labour for 15 mm thick screed bed in CM 1:4 as in interlocking paver block complete all as specified and directed .
Material and labour for 100mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. finished even and fair without using extra cement complete all as specified and as directed.
Material and Labour for sand filling under interlocking tiles including watering and consolidation complete all as specified.
Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Material and labour for painting to new plastered/concrete surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of priming paints plaster coat including preparation of surfaces complete all as specifed and directed.
Material and labour for Providing and fixing SFRC (Steel Fibre Reinforced Concrete) Cover and frame (heavy duty HD-20 grade designation) internal size 590x590mm & External size of frame 800x800x100mm including manhole cover having size 590x590x50mm thick and fixed over earthing manhole and set in CM 1:4 including benching in PCC 1:2:4 to fix the frame and finishing smooth complete all as specified and directed.
Supply and fixing sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed .
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, of size 550 x 400 mm including cast iron cartilever bracket ,32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed .
Supply and fixing single lever wash basin Brass CP mixer for mixing hot & cold water screwed down for 15mm bore pipe and fixed complete all as specified and as directed .
Supply and fixing Brass Chromium plated long body Bib Tap , screwed down, screwed for iron pipe or for brass ferrule for 15mm bore of pipe complete all as specified and as directed . Note :- The minimum weight shall be as given in SSR or in relivent IS.
Supply and fixing in replacement brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.
Supply & fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' trap including connection to drain ( or outgoing pipe) and to flushing pipe, anti syphonage pipe etc., including plastic water closet seat cover black pedestal pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified
Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing Stainless steel plate rack of size 900mm x 600mm x 250mm and thickness of Stainless Steel strip of 1mm fixed on wall etc. complete all as specified and directed .
Supply and fixing chromium plated angular stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed . Note :- The minimum weight shall be as given in SSR or in relivent IS.
Supply and fixing in repair PVC connection 15 mm size with brass nuts on both ends and washers length 450mm complete all as specified and directed.
Taking down or up 15 mm bore galvanised iron tubing and removal from site complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing and removal from site complete all as specified and directed.
Supply and fixing stainless steel, Chromium plated, decorative type, soap dish holder of approximate size 160 x 160 x 90 mm fixed to wall with rubber plugs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs Brass Chromium plated long body Bib Tap , screwed down, screwed for iron pipe or for brass ferrule for 15mm bore of pipe complete all as specified and as directed .
Supply and fixing grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed
Material and labour for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.and Brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and as directed by Engineer-in-Charge.
Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 10 mm thick screed plaster in CM 1:4 complete all as specified and as directed .
Dismantling of stone slab and tiles of any description or thickness in floor, aprons, kerbs, vertical surface etc laid dry complete all as specified and directed.
Material and labour for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including Material and labour for 15 mm thick screed in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge. Note:- Sample of granite for Shade and type shall be approved by GE before procurement.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed .
Material and labour for rendering 15 mm thick in CM 1:3 on fair faces of brick work or cement concrete surfaces using water proofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified.
Material and labour for applying two coats of Dr Fixit pidecrete urp in sunken floor portion of toilets & bathroom, chajja, staircase etc. by using URP+ cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush etc. complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete (1:5:10), type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches including all fittings & accessories complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches including all fittings & accessories complete all as specified and directed.
Supply and fixing in repair 100mm bore Cast Iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
Supply and fixing in repair 75mm bore Cast Iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door including jointing to to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
Supply and fixing in repair Cast iron floor trap, 100mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP grating of suitable size complete all as specified and directed.
Supply and fixing in repair Cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP grating of suitable size complete all as specified and directed.
Supply and fixing 32mm dia, waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.
M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) 20mm bore surface on wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories for one light/fan/call bell/exhaust fan point controlled by one 5/6 Amps switch and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and directed. NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ.
All as item No 159 here in before but for one socket outlet 3 pin, 6 Amp with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board but not below the switch board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc complete all as specified and directed.
All as item No 159 here in before but for one socket outlet 6 pin, 6/16 Amps 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board but not below the switch board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc complete all as specified and directed.
Supply and fixing Modular Switch 1 way 6A,1 Module complete all as specified and directed by Engineer-in-charge.
Supply and fixing Modular Socket Outlet , Multipurpose,3 Pin, 6 Amp , 2 Module complete all as specified and directed by Engineer-in-charge.
Supply and fixing Modular Switch one way 16 Amp 240 Volt, AC ,1 Module complete all as specified and directed by Engineer-in-charge.
Supply and fixing Modular Socket outlet , multipurpose, 2/3 Pin, 6/ 16 Amp 2 Module complete all as specified and directed by Engineer-in-charge.
Supply and fixing ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed .
Supply and fixing 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS16106/IS16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white , in built LED driver, power factor >0.95, including 18/20 watt tube rod complete connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and directed .
Supply and fixing energy efficient LED street light of 25 Watt with PDC aluminium body and clear glass with lens for wide beam distribution, top maintainable type with IP 66 degree of protection, PF>0.95 with voltage range 140 to 170 Volt, fitting should be provided with inbuilt 5KV minimum surge protection, short circuit and over voltage protection facility for driver and fitting including 25 watt LED lamp with GI bracket-01 No, MS clamp-02 Nos suitable for walls/columns metre long twin core round copper conductor cable of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as complete all as specified and directed .
Supply and fixing MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and directed .
Supply and fixing MCB, SPN, 32-63 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and directed .
Supply and fixing Double pole, 30mA, RCCB for EARTH LEAKAGE, PROTECTION 230V, 25A, Ac type complete all as specified and directed .
Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and directed .
Supply and fixing Blanking plate etc complete all as specified and directed .
Supply and fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and electrical connection providing twin core round copper conductor cable of suitable size including marking of MES number including fixed in position by using 4 Nos 200mm long 12mm dia fasteners, nuts and washers grouted in wall with cement mortar 1:3 complete all as specified and directed.
Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers and shutters and mounted in suitable opening arrangement in wall/window and providing electrical connection with twin core round copper conductor cable of suitable size from ceiling rose to fan including marking of MES number including fixed in position by using 4 Nos 200mm long 12mm dia fasteners, nuts and washers grouted in wall with cement mortar 1:3 complete all as specified and directed.
Material and Labour for Cutting holes exceeding 150sqcm but not exceeding 400sqcm area, not exceeding 30cm depth in brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as per site requirment and making good the distrubed wall, white washing with existing colour etc complete all as specified and directed.
Supply and fixing Angle lamp holder of PVC/Polycarbonate type including of 9/10 watt LED bulb 6000K complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed .
Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volt complete all as specified and directed .
Supply and fixing storage type electric water heater ABS body with copper inner tank and heating element upto 2 KW capacity 25 Ltr, BEE 5 star rating complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including testing after installation and marking of MES number including fixed in position by using 4 Nos 200mm long 12mm dia fasteners, nuts and washers etc grouted in wall with cement mortar 1:3 complete all as specified and directed
Supply and fixing PVC flexible pipe connection wire braided of length 300mm having 15mm size with PTMT nuts and PVC washers on both ends complete for cold water/hot water inlet/oulet line complete all as specified.
Supply and fixing PVC flexible pipe connection wire braided of length 450mm having 15mm size with PTMT nuts and PVC washers on both ends complete for cold water/hot water inlet/oulet line complete all as specified.
Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and directed. Note :- The minimum weight shall be as given in SSR or in relivent IS.
Supply and fixing stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed . Note :- The minimum weight shall be as given in SSR or in relivent IS.
Material and Labour for Sub main wiring concealed PVC conduit with two single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified & directed.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section, 2 core, solid conductor in service connections complete all as specified and as directed
Material and labour for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia medium grade, ISI marked for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.
Material and labour for Earthing complete with copper earth plate electrode of size 600mm x 600mm x 3.15 mm thick buried directly in ground, vertically total depth not less than 2.25 mtr below normal ground level with top edge of earth plate at depth of not less than 1.5 mtr below ground level surounded from all sides with alternate layers of charcoal and common salt and connected to copper earth strip 25mm x 3 mm thick by means of GI bolts, nuts washers & check nuts and soldering the strip, electrode connected to panel board or on poles or on transformer (including making of test point with copper strip of size 25mm x 3 mm) including GI protection pipe 40 mm light grade dia for protection of strip upto test point all as directed GI pipe medium grade 20 mm bore for watering including providing funnel and wire mesh, CI frame and 10 mm thick cast iron cover, PCC chamber pit with PCC (1:3:6) type C2 using 40 mm graded stone aggregates complete including excavation and earth work in any type of strata , all as specified and shown in electrical plate No 3 of SSR, PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 25mm x 3 mm copper strip and 20mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.
Supply and fixing of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos., 8mm dia, 25mm long hex. head screw complete all as specified
Supply and fixing of Air termination single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified.
Supply and fixing of Aluminium strip 25 x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified.
Supply and fixing of Copper strip 20 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified.
Supply and fixing white porcelain ceramic insulator with nut, bolt and washers for fixing earthing strip on wall/ceiling/roof complete all as specified and directed.
Material and labour for Anti- termite treatment ,Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
Material and labour for Anti- termite treatment , Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
Material and labour for Anti- termite treatment , Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
Material and labour for Anti- termite treatment , Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
Material and Labour for applying two coats of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth and complete all as specified and directed.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.
V K CONTRACTOR
M/s Kamal Builders
M/s HANS BROTHERS
STELLAR PROJECTS
SAHIL CONSTRUCTIONS
M/S KARTIK BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .