SPECIAL REPAIR TO BLDG NO P-28 AND P-29 (TOILET AND BATHROOM) AT SADILPUR AND REPLACEMENT OF GARDEN LIGHT AT LAVANYA COMPLEX UNDER GARRISON ENGINEER GUWAHATI

Amount

Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

Material & labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM (1:6) and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM (1:4) mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished fair & even without using extra cement complete, all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

Supply only liquid water proofing compound. Note :- Dose of WPC shall be used as per manufacturer's instruction.

M&L rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of white wash on walls complete all as directed.

M & L preparation of new surfaces of wall, finishing walls with Acrylic Smooth exterior paint of approved shade with two coat @ 1.67 ltr/10 sqm over and including priming coat of exterior primer @ 2.20 kg/10 sqm complete all as specified and as directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of water based acrylic distemper over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and as directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

Supply and fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single piece extruded PVC profile reinforced with MS square tube in opening & edges shall be painted to match with printed sheet as per specifications complete all as specified.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply and fixing 4mm thick Sheet glass frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete as specified and as directed.

M & L for 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work complete all as specified and directed

Supply and fixing continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap (when open) 30mm complete all as specified and directed.

Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stable complete all as specified and as directed.

Supply and fixing 200 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

M&L 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast, cast section and fixing bolts and sliding bolts of cost aluminium alloy complete all as specified.

Supply and fixing 150 mm aluminum handle cast type anodized, complete all as specified.

S&F 100mm size Butt hinges, medium weight, cold rollded mild steel complete as specified and as directed.

Supply and fixing mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection and width shall be as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L for prepolished Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray cement and no pigment including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material & labour Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exe 0.18Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 15 mm thick (1:6) complete all as specified and as directed.

Material & labour Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 10 mm thick (1:4) complete all as specified and as directed.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in over and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and as directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed.

Supply and fixing as in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in rain water/soil waste etc complete all as specified and as directed.

Supply and fixingas in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore of pipe and complete all as specified and as directed.

Supply and fixing as in repair 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fixing as in repair 110mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.

Supply and fixing as in repair 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing as in repair 110mm PVC (SWR) floor trap or Nanhi trap, plain with grating including jointing with solvent cement complete all as directed.

Taking up or down 15 mm bore GI pipe and connection complete all as specified and as directed.

M&L for 15mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and laid in floors complete all as specified and as directed.

Taking up or down 20 mm bore GI pipe and connection complete all as specified and as directed.

M&L for 20mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors complete all as specified and as directed.

Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed.

Supply and fixing as in repair ball valve high pressure of PTMT suitable for 20mm bore pipe (minimum weight -210Gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed

Supply and fixing as in repair vitreous china squatting pan, orissa pattern size 580 X440 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

Supply and fixing as in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as per directed.

Supply and fixing as in repairs coloured plastic water closet seat cover, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing Hand shower (Health Faucet) (ABS BODY) with 8mm dia, 1m long flexible tube and wall hook as in repair complete all as specified and directed.

Supply and fixing as in repairs 15mm bore fancy type Bib taps chromium plated, cast opper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing as in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) with plastic WC seat cover white closed pattern with flat bottom and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified & as directed.

S & F in repairs vitreous China wash basin, white, flat back, single 550 x 400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets, waste coupling, short connection pipe complete all as specified and as directed.

Supply and fixing as in repairs pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia,D Type 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (mimimum weight 190 gms), complete all as specified and as directed.

Supply and fixing in repair brass chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing as in repairs cast Copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing as in repairs PVC connection 15 mm bore 450mm long directed with PTMT nuts complete all as specified and as directed.

S & F in repair 32 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in waste pipe laid in trenches completed all as specified and directed.

S & F in repair 40 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in waste pipe laid in trenches completed all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F Mild steel framed work made up with 10/12mm solid square bar and MS Flat 25x6 mm such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 completed all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,tarfelt bituminous compound and brushing neat cement slurry with 3kg of cement per sqm completed all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for completed all as directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding complete all as per specified and directed

M & L for Screed bed or bedding layer of cement mortar (1:6) 20mm thick for laying floor finishes completed all as specified and directed.

M& L for Applying evenly a priming coat with bituminous primer at 10 kg per 10 sq metre complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application and applying one coat of aluminium paint over the APP based membrane @ 0.11 kg per sqm complete all as specified and as directed.

M & L Prime the surface with high performance, water based, cold applied, single component elastomeric insitu liquid membrane for waterproofing usually produced in White / Terracotta / Green colour (BTD or equivalent as approved) mixed with water @ 1:1 ratio (200gm BTD: 200 gm Water) and use as primer @ 400 gm / m². Allow the primer coat to touch dry condition. Apply 1 st coat of high performance, water based, cold applied, single component elastomeric insitu liquid membrane for waterproofing usually produced in White / Terracotta / Green colour @ 0.8 kg/ m² by brush / roller / airless spray while the primed surface is tacky. For faster and smoother application, apply with airless gun.Allow 1 st coat to dry for 10 - 12 hr. Apply 2nd coat of high performance, water based, cold applied, single component elastomeric insitu liquid membrane for waterproofing usually produced in White / Terracotta / Green colour @ 0.8 kg/ m² by brush /roller / airless spray for final DFT of 1200 micron in two coats,including taking down old APP membrane and preparation of surface complete all as per manufacturer instruction.

Excavating in trenches. n exc 1.5 m wide and n exc 1.5 m in depth ; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting put complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Supply and laying dry sand cushioning for UG cable protection in trenches with fine river sand 9 cm before laying cable and 9 cm deep cover after laying the cable complete all as specified and directed. Note:- Punned thickness shall only be measured for payment.

Material & labour for brick protection cover to underground cable with sub-class ‘B’ old size over burnt bricks laid dry and flat across the axis of cable, abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified & directed.

Material & labour for 40 mm dia GI pipe ‘light grade’ with all fittings for protection of cable laid in trenches complete all as specified and directed.

Supply, laying, jointing including testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 16Sqmm x 2core, heavy duty, with aluminium conductor, 1100 Volt grade, laid in treanchs/ ducts/ along wall / under road etc complete all as specified and directed.

Supply and fixing Tubes, 'Medium Grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors of40 mm dia complete complete all as specified and as directed.

Supply and fixing Tubes, 'Medium Grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete complete all as specified and as directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm dia complete complete all as specified and as directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm dia complete complete all as specified and as directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site complete all as specified and directed

Material & labour for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thick Modular top cover for mounting of modular fittings, switches, sockets outlets, regulators etc and provisining of 1.5 sqmm PVC insulated unsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following srl item No. 2.04 to 2.09 :-

One light/ Ceiling/ exhaust fan point controlled by one one/way switch complete all as specified and as directed.

One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and directed.

All as per item No. 92 above but wiring with 4sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and as directed.

Material & labour for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed and conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length.

Supply and fixing as in repair LED Tubelight lights fitting 1x22W, 220V, AC decorative box type with CRCA body precotaed white & pre wired for driver, holder connecting up with LED down rod three core flexible copper conductor cable of suitable size from ceiling rose including 1x22 w LED tube Rod complete all as specified and as directed.

Supply and fixing LED tubelight fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing as in repair 10W LED Bulkhead light,pressure die cast housing LED bulkhead with IP65 Protection and IK09 Impact resistance suitable for surface/wall mounted,complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing water heater storage type capacity 50 litre BEE 5 star rated Sensing LED Indicator, Rust & Shock Proof Body, ISI Marked, with Flexible Pipes, Warranty: minimum 5 year on Inner Tank, suitable High Rise Compatible (White Blue) including all necessary connections complete all as specified and as directed.

Supply and fixing exhaust fan, steel body, AC, single phase, 230V of size 380mm sweep with blades metal frame and louvers complete all as specified and as directed.

Supply and fixing Modular switch, one way, 5/6 Amps one module 240V complete all as specified and as directed.

Supply and fixing Modular switch, one way, 16 Amps one module 240V complete all as specified and as directed.

Supply and fixing Modular socket outlet 16 Amps, 6 pin, 3 module complete 240V all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite two to three terminal 65x50mm three terminal 250/230Volt, ISI marked complete all as specified and as directed.

Supply and fixing factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed.

Supply and fixing MCB, SPN, 240 volts, C Curve, 32 Amps 10 KA complete all as specified and as directed.

Supply and fixing MCB, SP, 240 volts, 20-32 Amps 10 KA, C Curve, complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc including taking down old earthing complete all as specified and as directed. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

Supply, laying, jointing including testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 16Sqmm x 4core, heavy duty, with aluminium conductor, 1100 Volt grade, laid in treanchs/ ducts/ along wall / under road etc complete all as specified and directed.

Supply, laying, jointing including testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 6Sqmm x 2core, heavy duty, with aluminium conductor, 1100 Volt grade, laid in treanchs/ ducts/ along wall / under road etc complete all as specified and directed.

S & F cable junction boxes of size 88 x 88 x 47 mm IP 55 with integrated membranes for cable entry of size upto 6.0 Sqmm complete all as specified and as directed.

S & F LED bollard fitted with glare diffuser of 10 w capacity with required quantity of PCC for foundation, including tersting on completion certificate complete all as specified and as directed.

Supply, install, test and commission LT Panel board, TPN 415 Volts, 50 Hz, out door cubical type floor mounted CPRI approved factory made, double door dust and vermin proof IP-54, fabricated out of CRCA sheet not less than 3.15 mm thick with 2mm thick for internalconpartment duly powder coated fixed on angle iron dpedestal made out of 50x50x6 mm with cable chamber for individual feeders for incomming and outging connections, one set of LED indicator lamp RYB with switch and fuse and the panel board shall be provided with proper vetillation including suitable size of cable alley copper bus bar suitable for carrying of currect 200 Amps with suitable connections from MCCB out going to main bus bar shall be carried out with TPN copper bus bars of suitable rating and connections from main bus bar to out going MCCB's (intake point)will be carried out with TPN copper bus bar as per MCCB rating duly indulated and colour coded heat shrinkable sleeve and shall be rigidly mounted on suitable size of bridge insulator including necessary PCC foundation of minimum 0.35 m height positioned and fixed with suitable nut, bolts, washers etc to the MC pedestal all as specified and directed comprising of following:-

(a) MCCB 40 Amps 4 pole 50 Hz 415 V with fix thermal and fixed magnetic release having rupturing capacity 10 KA - 01 Nos incoming). (b) MCCB 32 Amps 4 pole 50 HZ 415 V with thermal magnetic release having repturing capacity 10 KA - 1 No (Outgoing). (c) Electric timer 3 phase 415 volt - 1 No (c) 3 Ph digital multi function meter model A class1 5A with relay Vega Series - 1 No (d) Indicating lamp 240 volts LED type - set of three

SANJAY KRISHNA HAZARIKA (BID ID -3290688)

Prime Trader (BID ID -3290281)

M/S SEWAK SINGH (BID ID -3290621)