Construction of allied supplementary works for Kausa Hospital

Amount

Excavation for foundation in earth, soils of all types, sand gravel and soft murum including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as pecified,stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed upto 1.5 mtr

Excavation for foundation in earth, soils of all types, sand gravel and soft murum including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as pecified,stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed above 1.5 mtr to 3 mtr

Add for lead including levelling. Note : Prior Specific sanction of Head of Dept. should be taken if transportation is to be done at night for above items, (i.e. between 8.00 pm. to 6 am.) and the rate shall be reduced by 10%. This item will be operated/executed with the specific sanction of the Chief Engineer. (50 km)

Filling in plinth and floors with contractor smaterial/brought from out side and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.

Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Castin situ / Ready Mix cement concrete in M15 of trap/granite / quartzite / gneiss metal for bed blocks ,foundation blocks and such other items including bailing out water,Steel centering, formwork, laying/ pumping, compacting, roughening them if special finishis to be provided, finishing unevenand honey combed surface and curing etc.complete. The Cement Mortar 1:3 plasteris considered for rendering unevenand honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc.(Wooden centering will not be allowed.),with fully automaticmic roprocessor based PLCwith SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M 30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (chrushed sand and V.S.I. grade)

Providing and laying Castin situ/ Ready Mix cement concrete M-30 of trap/granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to givea smooth and even surface or roughening if special finish is to be provided and curingetc. complete, (Excluding reinforcement and structural steel ).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ / Ready Mixcement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centring, formwork, coverblocks, laying/ pumping, compacting, curing, finishing and roughening the mif special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic microprocess or based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mixplant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast insitu/ Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C.slabs and landings as per detailed designs and drawings including steel centering,formwork,cover blocks, laying/ pumping, compaction finishing the for medsurfaces with cement mortar 1:3 of sufficient minimum thickness to givea smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel). with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying cast insitu/ Ready Mix Cement Concrete M-30 for bored piles each of load capacity and as per design and of 600 mm diameter or as directed placed through steel shells sunk to there quired depth throgh all strata except rock excluding provision of reinforcement as per detailed drawings and design approved by the Engineer-in-charge including placing with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer) etc. complete. With fine aggregate (Crusheds and VSIG rade) by tremie arrangements, compaction of concrete including chipping and dressing and with drawal of shell etc. complete.(Excluding steel reinforcement )

Chiseling through pile shells in hard strata like boulders, soft and hardrocks Beyond 550mm and upto and inclusive of 750mm dia .including removing and stacking the loose materialsetc.completeanddisposing of the unserviceable materials outside complete. 600 mm diameter

Empty boring for 525 to 600 mm dia bored R.C.C. cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metres etc. complete. Spec :(As directed by Engineer in Charge)

Carrying out low strain pile integrity test on 300mm / 350 mm/ 400 mm / 450 mm / 500 mm / 600 mm /750 mm/ 900 mm diameter pile including all arrangements for test, equipments/accessories, materials, labour, submission of test report etc but excluding the cost of installation of job pile (installation of pile shall be paid seperately as per relevent items)all complete as per specification and as directed by the engineer-in-charge.

Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps (As directed by Engineer in Charge

Providing and laying Cast in situ / Ready Mix cement concrete M-30 of trap metal for R.C.C. pile caps as per detailed designs and drawings , including bailing out water manually , centering , formwork ,laying /pumping compacting , finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate ( Crusheds and VSI Grade) complete. (Excluding steel reinforcement)

Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C.pardi of required thickness including steel centering,form work,cover blocks, laying/ pumping, compacting and roughening the mif special finish is to be provided and curing complete. ( Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position- T.M.T. FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies,coping, fins, arches, etc. as per detailed designs,drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles upto required depth with 12 mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to requied diameter and shape, welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in charge.Upto 3.00 meter deep liner

Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles upto required depth with 12 mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to requied diameter and shape, welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in ChargeFrom 3.00 to 9.50 meter deep liner

Providing structural steel work in trusses, ot her similar trussed purlins and members with all bracing, gusset plates etc.as per detailed designs and drawings or as directed including cutting, fabricating,hoisting,erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing second class Burnt Brick masonry with conventional /I.S.type bricks in cement mortar 1:6 in super structure including striking joints,raking out joints,watering and scaffolding etc. Complete

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing and applying gypsum plaster (with Gypsum material of Gypsum India/ Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and applying premium grade royale/velvet acrylic emulsion paint of approved quality, colour and shade to new surface in two coats including primer ,putty,primer with perfect leveling , clening scaffolding, preparing the surface. etc. complete.

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position and also Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including two coat water proofing & crack filling, scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.

Providing sand face plaster externally in two coats using approved screened sand in all positions,including providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receiet he sandfaced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

ETP TANK Providing and fixing 20 to 25 mm thick rough shahabad box type water proofing treatment to vertical out side faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with waterproofing liquid Algaeproof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cemnt mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with waterproofing liquid, curing, with 7 years guarantee on court fees tamp of Rs.100/-with ponding test etc complete.(excluding Cement concrete 1:3:6 base concrete)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm / kg with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. as Directed by Engineer Incharge.

Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge, grooving, moulding etc in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge.(Gangsaw Granite or Equivalent) as Directed by Engineer Incharge.

Providing and laying Polished Kota stone flooring With Hand- Cut Polished Kota Stones 25 mm to 30 mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc.complete Note-Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer )

Providing & Laying Tarkett IQ Optima (or equivalent) 2 mm thick homogeneous PVC Vinyl flooring certified by EN 649, in rolls form of 2m wide and 25m long, produced in Europe, total weight 2850 g/m2 maximum, semi directional design, surface protected with polyurethane reinforced, restorable flooring with dry-buffing, no wax and no polish required for maintenance, Abrasion group T according to EN 660 , residual indentation below 0.03 mm according to EN 433, castor wheel test qualified according to EN 425, dimensional stability ≤0.40% according to EN 434, static electrical charge < 2kv according to EN 1815, Class A clean room certified according to ASTM F51/00, 100% recyclable, VOC emission after 28days lower than ≤10μg/m3, Phthalate Free, 100% recyclable. The laid flooring shall comply the fire rating BFL S1 as per EN 13501-The joints should be thermo welded with matching multicolor welding rods provided by the manufacturer as per architect detailed drawings & design etc.complete. as Directed by Engineer Incharge.

Providing & Fixing the floor finish should terminate at the room perimeter passing over a flexible PVC profile which shall provide a neat cove allowing floor covering to be dressed up the wall to form a skirting and support floor covering at a weak point. Capping seal shall protect the exposed edge. (Skirting) provided by the manufacturer as per architect detailed drawings & design etc.complete. as Directed by Engineer Incharge.

Providing and Laying TARKETT IQ Toro SC (or equivalent) Permanently static conductive pressed homogeneous vinyl flooring (EN 649) in rolls of 2m wide, thickness of 2mm (EN429), PVC Vinyl flooring (imported) having Carbon backing and carbon particles in the design with total weight 2950 g/m2 (EN 430), XR PUR (polyurethane reinforced) ,Abrasion group P:≤4,0mm,residual indentation approx. 0,02 mm, castor wheel test qualified, dimensional stability ≤0.40%,static electrical charge < 2kv, good resistance of scratch, slip, chemical and fire, doesn’t favor in growth of fungi. Electric resistance is as per EN 1081 and ESD approved. IQ Toro SC is a high-quality static control flooring with an electrical resistance of 5 x 104–106 ohms. Restorable properties. Available in rolls. 100% recyclable. VOC emission after 28days of installation lower than ≤100μg provided by the manufacturer as per architect detailed drawings & design etc.complete. as Directed by Engineer Incharge.

AQUARELLE Wall covering - Providing and fixing 0.92 mm thick TARKETT heterogeneous PVC Vinyl wall-covering (imported) with total weight 1500 g/m2, Sanitized, dimensional stability ≤0.40%, good resistance of scratch, slip, chemical and fire. Wall covering for indoor application in accordance with the harmonized standard EN 15102. 100% recyclable. Low VOC emissions after 28days of installation (lower than ≤100μg/m3). provided by the manufacturer as per architect detailed drawings & design etc.complete. as Directed by Engineer Incharge.

Providing and fixing 15mm thick Bison board of approved make, with shapes and sizes as per drawings, including scaffolding, all screws and fastening and finishing complete. as Directed by Engineer Incharge.

Engraving the letters of sizes specified below in golden or any other approved colour on granite stone etc. complete as directed by Engineer In Charge. a) Letters upto 30mm in any language as directed. as Directed by Engineer Incharge.

b) Letters above 30mm and upto 50mm in any language as directed. as Directed by Engineer Incharge.

c) Border line upto 12mm thk. as Directed by Engineer Incharge.

Providing and laying in position skirting or dado of polished Kota Stone slab of approved quality 25mm to 30mm thick on plaster in cement mortar 1:4, including cement float, filling joints with neat cement slurry, curing polishing and cleaning etc complete.(excluding Plastering) as Directed by Engineer Incharge.

Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, half rounding,chamfering, grooving, moulding etc. smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge. (GangsawGranite or Equivalent) 18mm thk. Steelgray Granite slab for width upto 300mm ( window ) as Directed by Engineer Incharge.

Providing and applying three coats of waterproof cement paint of approved manufacture and of approved colour to new plastered surfaces including scafolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. as Directed by Engineer Incharge.

Providing & Fixing Slidding window systems are manufactured from Rigid Thermo Vinyl Polymer (RTVP) Profiles suitable for tropical development.The profile are with multichambered construction.The nominal thickness of outer wall is 2 MM.The outer frame size is 105 x 52 mm.Roller shutter frame 60 x 27 mm & Handle shutter frame 52 x 30mm. Glass panels used in window system shall be of 6mm thick clear float glass manufactured by Modiguard/Saint Gobin/Asahi or any other approved equivalent. The window systems are prefabricated in fatory.All the corners of outer frame & shutter are fusion welded under pressure to a pre-determined temp.& time ,as per the specification & design.The structural reinforcement chambers are not exposed to any drainage routing.The steel reinforcements are 1.5mm thk.hot dip galvanised & passivated for corrosion resistance & tropical development.Slidding track is made of UPVC profile, which is the part of outer frame for smooth movement of shutter. Sliding roller assembly consist of Nylon Roller & Zinc Alloy casting body.Mosquito frame is part of the slidding outer frame.Gaskets are made of Ethylene Propylene Dienemer (EPDM).which has good wheathering properties & resistance,to tear & decay to OZONE & U.V.exposure.as per manufacturers specification as directed by Engineer in Charge etc. complete as Directed by Engineer Incharge.

Fire rated Double leaf Door - Laminate Finish: Providing & Fixing of Wooden Fire door without Panic Bar of approved make and of required size, 120 minutes fire rating, integrity and insulation in accordance with the criteria of BS 476 ; Part 22 : 1987 and report 212 (1)/FR/2003; Insulation on door leaf only. Tested at Fire Research Laboratory, Central Building Research Institute, Roorkee with standard heating conditions as specified in IS : 3809-1979 and BS : 476 part 20 & 22, 1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140 degree Centigrade above the ambient temperature on the unexposed surface of the shutter). Red Mirranti Hard wood frame of section 145mm x 70mm with Intumescent strip (Imported) to take care of Hot and cold smoke of size 10mm x 2mm x 2Nos. Concealed in the grove of the frame and 55mm thick single leaf shutter made out of perimeter railing of Red Mirranti wood of size 100mm x 29mm and promina 60.9mm thick Calcium Silicate Board Fire Retardant compound on each side coated with Intumescent sealant and faced with 4mm thick marine ply with Fire and smoke Intumescent Seal of size 20mm x 2mm x 1 No., mounted in the grooves in the shutter on all sides except bottom with 10mm thick Hardwood beading on all side. The Fire Doors with frame will be as per IS: 3614 part 2 and BS: 476 part 20 at FRL CBRI Roorkee with standard heating conditions as specified in IS: 3809 - 1979 and BS: 476 part 20 & 22 1987. The door shall be finished with 1 mm thick fire retardent laminate on both side etc.,with approved Stainless steel fittings & Fixtures all complete to the entire specification as per Architect's Instruction.FRD -2 SIZE- 1.250 x 2.350m as Directed by Engineer Incharge.

Providing and fixing Concealed door closer of approved make manufactured as per IS:3564 for doors with necessary accessories materials and labour cost etc. complete.of make godrej and similar.

Providing & constructing Brick Masonary Inspection chamber 90 x 60 cm internal size & depth upto 1.2M with 15cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion,plastering from inside & outside as required in c.m.1:3 , 1:2:4 cement concrete haunches at bed, precast S.F.R.C frame & cover, etc.complete as directed by Engineer in- Charge.

a) Add for every increase in depth of 30cm or part there of

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) as Directed by Engineer Incharge.

for providing & Fixing mechanical device for operating rolling shutters. as Directed by Engineer Incharge.

providing and fixing FRP CHAMBER COVER 900*450 size capacity 40MT /Sqm as per instruction by engineer incharge

Providing and fixing HOSPITAL Cubical Partition Tracks for beds L shape with suspention rod for ceiling insalltion all Accessories including (HSN/SAC) 8302 etc. The track should be of powder coated aluminium extruded profiles of size 40mm*18mm, Pvc Profile Between Track having Weight 0.46gm/mtr., nylon runner with hooks. The aluminium profiles should be fixed at ceiling with a 12mm ceiling fixing rod along with nuts and bolts and all other required accessories

providing and fixing Hospital Curtain with Net 126 beds(HSN/SAC)8302 as per architects Drawing and instructions of Engineer In Charge.

Providing and fixing Ready Curtains with ANTI NOICE Track with plain black out along with 24mm aluminium suspension rod as well as plastic retina, etc. all complete as per the instructions of Engineer In Charge.

Providing and fixing Roller Blinds Ready. Plane blockout as per architects Drawing and instructions of Engineer In Charge.

Providing and fixing : High impact surface mount Corner Guard having Vinyl: Snap on cover of .080" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers No plasticizers shall be added (plasticizers may aid in bacterial growth). Surface shall have a pebblette texture for scratch resistant. Continuous aluminum retainer of .070" (1.8mm) thickness shall be fabricated from 6063-T5 aluminum, with a mill finish. Dimensions to be of 3" (76mm) x 3" (76mm), 90 degree. The rigid vinyl profile shall resist an impact of 30.2 ft-lbs/inch as per ASTM D-256-90b and shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It includes Top caps and bottom caps which shall be made of injection molded thermoplastics. as Directed by Engineer Incharge.

Providing and Fixing : Handrail having rigid vinyl snap-on cover(lead free) of 080" (2mm) thick, Surface shall have a pebblette texture for scratch and stain resistant rigid vinyl cover mounted on a sturdy continous aluminium retainer of .080" (2mm) thickness that shall be fabricated from 6063-T5 aluminium with a mill finsh. 5-1/2" (140mm) height x 1-1/2" (38mm) gripping diameter, extends 3" (76mm) from the wall. The system shall resist an impact of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test. The rigid vinyl shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It includes Molded end returns with black reveals and mounting brackets. as Directed by Engineer Incharge.

Providing, fabricating and fixing M.S.grill work as per approved designand as per weight specified below to fencing / compound mades out of square / round bars,M.S.flats,angles, with necessary holdfast including painting with one coat of red oxide zinc chro mate primer and two coats of approved synthetic enamel paint etc.complete as directed by Engineer In Charge. c) Mild steel grill of weight 20 to 25 Kg/sq. m as Directed by Engineer Incharge.

Providing and fixing aluminium powder coated trap door as per required size for AHU unit as per manufacture details specifications etc complete. as Directed by Engineer Incharge.

Providing, detailing, and fabricating as per specifications, transporting to site and erecting MS Openable / Sliding / Ornamental Entrance Gates including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets decorative balusters, arrow heads etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 25 to 30 kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface -Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @250 gms per Square Metre area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.complete.

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt. 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. as Directed by Engineer Incharge.

Providing and maintaining Barricading on the site 2.5 m high by using MS Pipes or angle iron frame work of verticals at 3 m c/c and horizontals at 0.90 m c/c, GI corrugated sheets, Struts, MS Clamps, etc. The verticals shall be embedded/ fixed to concrete pedestals below ground. The rate to include fabricating, cutting and fixing in position MS frame work, painting the same with two coats of approved anti rust paint, etc complete. Contractor to get structural design approved by the Engineer. Contractor shall remove and take away the barricading at his own cost on completion of the works. as Directed by Engineer Incharge.

providing and fixing Hoapital Building Outdoor Signages LED Made Of MS Febrication Hording & bracket & Inported Aluminium channel cutout letter & acrylic cutout box letter , inside Modular Led for Backlight arrangement. (fixing & transportation charges incluiding) as directed by engineer Building Top Side Hording ( 2 Nos) MS Hording Bracket for fitting arrangement. Size-- 50' x 25' Both Side . as Directed by Engineer Incharge.

Letter Size : 48" Hindi Letter as Directed by Engineer Incharge.

Letter Size : 48" Marathi Letter as Directed by Engineer Incharge.

Letter Size : 48" ( T M C HOSPITAL ) as Directed by Engineer Incharge.

Modular Led & Smps : as Directed by Engineer Incharge.

Building Frant Side Hospital Name Bracket for fitting arrangement. as Directed by Engineer Incharge.

Letter Size : 36" ( T M C HOSPITAL ) as Directed by Engineer Incharge.

Modular Led & Smps : as Directed by Engineer Incharge.

Hospital Internal All Signages Made of Imported Aluminium Anodised section with both side imported acrylic with matter 3m vinyl printing , pasting on Acrylic sheet. backside fixing arrangement. A) Size: 300 mm x 120 mm ( Door Mount One Side ) as Directed by Engineer Incharge.

B) Size: 300 mm x 120 mm ( Wall Mount One Side ) as Directed by Engineer Incharge.

Size: 600 mm x 300 mm ( Suspended ) as Directed by Engineer Incharge.

Size: 1800 mm x 450 mm ( Way Finding Suspended) as Directed by Engineer Incharge.

Size: 1800 mm x 1200 mm ( Main Floor Directory) as Directed by Engineer Incharge.

Size: 150 mm x 200 mm (WS 60 Electric Danger) as Directed by Engineer Incharge.

Size: 450 mm x 150 mm (Staircase) as Directed by Engineer Incharge.

Size: 300 mm x 200 mm (Emergency Door) as Directed by Engineer Incharge.

Size: 300 mm x 300 mm (CS 25 In Case Of Fire Do Not Use) as Directed by Engineer Incharge.

Size: 200 mm x 200 mm (Fire Hydrant / Hoses) as Directed by Engineer Incharge.

Size: 150 mm x 200 mm (Fire Extinguisher) as Directed by Engineer Incharge.

Size: 400 mm x 400 mm (Evacuation Plan As Location) as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti vibratring pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector/MSEB/MPCB/PWD as per specification, The engine filling of oil, diesel etc. whenever required upto handing over to User department. The DG set shall include all accessories items, protections, safety parameters, control Panel compatible with BMS (IP/BACNET/ ALL TYPE OF POTETIAL FREE CONTACTS/ MODBUS ETC.), base frame with anti-vibration mount pad, fuel tank of 8 Hour capacity(750Ltrs to 999 Ltrs Tank capacity) with indicator, fuel pipe with pump, residential type exhaust silencer, 2X12 volt 180 amp-hour battery complete with copper conductor battery leads of required length and socket/clamps including G.I. stands for battery with wooden base, adaptor box etc complete as required for a 500 KVA DG Set as per the manufacturer recommendations. 500 KVA DG Set as per CPCB II norms, including No Load and Full load testing at Factory Before dispatched at site. EXHAUST ROUTING TO ATMOSPHERE FROM ENGINE Exhaust system consisting of 10" ERW Pipe including bends, flanges & hardware etc.10" ERW Pipe including bends, flanges & hardware etc. r above exhaust pipe with 50 mm thk. Rockwool slab of 100 Kg/ M3 , wrapped with 24 gauge Aluminium sheet exhaust pipe with 50 mm thk. Rockwool slab of 100 Kg/ M3 , wrapped with 24 gauge Aluminium sheet exhaust pipe & silencer , with one coat of primer and 2 coats of Enamel Paint Insulation for silencer, 50mm thk. Rockwool Slab of 100 Kg/ m3 and wrapped with 24 gauge Aluminum sheet Notes :- 1) Supply of all Misc. materials, required to complete the installation on” Turnkey’’ basis are to be included in above offer.2)Required working Drawing for foundation to be furnished by Contractor. 3) Work excluded from the scope of supply under ‘’ EXCLUSIONS’’ in covering specification shall be carried out by others but as per D.G. Supplier’s instructions and supervision. 4) Charging of batteries is supposed to be included in quoted price./or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Auto Mains Failure, Auto synchronizing, auto load shearing panel for 500 KVA 4 Nos D.G.SETS with following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable Top/Bottom gland plates for incoming and outgoing connections, dust and vermin proof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. As Per single line diagram. Panel Should compatible with BMS (IP/BACNET/ ALL TYPE OF POTETIAL FREE CONTACTS/ MODBUS ETC.) INCOMEING # 01 & 02 DG SET - 2 Sets of 800 A 3 P EDO 50 KA ACB each with SC / OC / EF / UV M.P. based releases & 400 A 3P Contactor 3 Nos. LED R-Y-B Indicating Lamps. 3Nos. Control MCB's Indicating Lamps for D.G operation 9 Nos 3 Nos. 800 / 5A 15 VA class 1 C.T.'s Load Manager with V,I,PF.KW, KWH HZ, Hour Meter with 3 Nos. Control MCB's 1 Nos Auto Synchronization, Auto Load shearing, auto Mains failures Relay (Comap / Woodward with latest version 3200) Relay with 3 Nos. Control MCB's Auto/Manual /Test switch. Push Buttons 4 Nos On / Off. INCOMEING # 01 & 02 DG set Busbars 800 Amps TP(N) Al. Heat Shrink colour PVC sleeved. OUT GOING Busbars 1 Sets of 1600 A 3 P EDO 50 KA ACB each with SC / OC / EF / UV M.P. based releases & 800 A 3P Contactor 3 Nos. LED R-Y-B Indicating Lamps. 3Nos. Control MCB's Indicating Lamps for D.G operation 9 Nos 3 Nos. 800 / 5A 15 VA class 1 C.T.'s Load Manager with V,I,PF.KW, KWH HZ, Hour Meter with 3 Nos. Control MCB's 1 Nos /or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations, Terminations,Testing, Commissioning of 3.5 C X 300 Sq. mm. A Y F Y XLPE 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (G.I. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied).

Supplying, Loading, Unloading, Installations, Terminations,Testing, Commissioning of 12C x 2.5 sq mm XLPE insulated sheathed & steel armoured COPPER Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (G.I. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied).

Supplying, Loading, Unloading, Installations, Terminations,Testing, Commissioning of 4C x 2.5 sq mm XLPE insulated sheathed & steel armoured COPPER Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (G.I. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied).

EARTHING Supplying, Loading, Unloading, Installations,Testing , Commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification complete with massonry inspection chamberwith 300 X 450 mm (or nearest standerd size ) C.I. cover, test link etc complete including boring, refilling, levelling etc. to obtain Earth Resistance up to Approx. 1 OHM.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron GI Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification complete with massonry inspection chamberwith 300 X 450 mm (or nearest standerd size ) C.I. cover, test link etc complete including boring, refilling, levelling etc. to obtain Earth Resistance up to Approx. 1 OHM.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints

Supply and installation of 2mm Thk M.S.Sheet in the Standard Length of 2.5mtrs, Duly Hot Dip Galvanised After Fabrication, Inclusive of Coupler Plate and Electro galvanized Hardware. 300 mm X 50 mm X 2 mm thick (Ladder Type)

ELECTRICAL WORKS- LIGHTNING ARRESTER WORK Supplying, Loading, Unloading, Installations,Testing , Commissioning of similer to ERICO model SI 60 i OR Equivalent Early streamer emission type lightning protection terminal based on French Standards NFC 17 102 amendment 2011., SUPPLY of Terminal only. This terminal will give a coverage radius of 79 metre at level I protection, when installed on a 5 metre mast.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Aluminium Mast 5 metre in two sections with base plate and adopter for fixing the terminal. similer to ERICO model

Supply, Installation, Testing & Commissioning of ERICO/Equivalent maintenance free earthing system. Comprising of the following: 1 No 10 ft 14.35 mm dia molecular bonded copper rod with steel reinforcement The copper earth electrodes are copper molecular bonded rods with steel reinforcement and are as a sleeve. The coating is 250 micron and its life is over 20 years. As the compound is also environmentally friendly (tested at various laboratories), it will not get aggravated by any soil conditions., 1 No Earth clamp, 2 Bags of ground enhancement material (GEM) 11 kg each,

Supply, Installation, Testing & Commissioning of Lightning event counter LEC IV .

Supplying, Loading, Unloading, Installations,Testing , Commissioning of copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints.

DEDICATED EARTHING FOR MEDICAL QUIPMENTS Supplying, Loading, Unloading, Installations,Testing , Commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification complete with massonry inspection chamberwith 300 X 450 mm (or nearest standerd size ) C.I. cover, test link etc complete including boring, refilling, levelling etc. to obtain Earth Resistance up to Approx. 1 OHM.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Single core 16 sq mm PVC copper flixible cable with copper sockets ( Lugs). For Dedicated medical equipment M/c

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Single core 25 sq mm PVC copper flixible cable with copper sockets ( Lugs). For Dedicated medical equipment M/c

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Single core 50 sq mm PVC copper flixible cable with copper sockets ( Lugs). For Dedicated medical equipment M/c

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Single core 70 sq mm PVC copper flixible cable with copper sockets ( Lugs). For Dedicated medical equipment M/c

ELECTRICAL WORKS- EXTERNAL CANOPY & TERRACE LIGHTS Supply, Loading, Unloading, Installation, Testing & Commissioning of 35 W,3850LM/3500lm, 120 degree beam anagle, Ra-70, IP-66,IK-07 Canopy Light CIRCULAR OR SQUARE shaped, Input Voltage AC220-240. 50/60 Hz, Operationg Volatge Range 140-270V, High performance electronic driver ensure zero maintance, High surge protection 6KV, Average life 50000 Hrs, Optics PC diffuser for better light distribution, No harmful UV & IR radiations, Operation temprature -10 to +45 degree celcious, Having loop in loop out etc complete with necessary hanging accessories etc complete. Similer to Panasonic PWGM06358/PWGM07358. / or equivalent / as Directed by Engineer Incharge.

ELECTRICAL WORKS- EXTERNAL CANOPY & TERRACE LIGHTS Supply, Loading, Unloading, Installation, Testing & Commissioning of Bulkhead Light 10-WATT - Warm White 2700k (IP65 Water-Proof) - Wall/Ceiling Mountable FOR Terrace Parapit Wall Built-In HIGH QUALITY POWER LED DRIVER with HIGH POWER FACTOR >0.97 (True Rated Power Consumption) Voltage Surge Protection Circuit up to 4 KVa 1,000 LUMENS: Intense Lighting Performance 50,000 Hours Life-Span 100% ECO-FRIENDLY: NO UV/IR, Lead-Free, 0% Mercury, Recyclable Material IP66 Standard - Water & Dirt Resistant THD ≤ 20%, Lumen output - 600, Housing - High pressure die cast aluminum Excellent Heat Management Product Dimensions: 21.5 cm x 13 cm x 6 cm, perfectly suitable for outdoor applications. Similer To Philips EnduraLED - Bulkhead / or equivalent / as Directed by Engineer Incharge.

ELECTRICAL WORKS- DISTRIBUTION BOARD AND MCB, RCCB, TPMCB, SPMCB ACCESSORIES WORK Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 WAY Incomer- 8 SubIncomer- 2+2+2 Outgoing- 4+4+4 IK 09-Horizontal PPI Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 6 WAY Incomer- 8 SubIncomer- 2+2+2 Outgoing- 6+6+6 IK 09-Horizontal PPI Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 8 WAY Incomer- 8 SubIncomer- 2+2+2 Outgoing- 8+8+8 IK 09-Including Internal Wiring Horizontal PPI Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings .

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 12 WAY Incomer- 8 SubIncomer- 2+2+2 Outgoing-12+12+12 IK 09-Horizontal PPI Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of High Rating MCBs 100A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of High Rating MCBs 80A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 63A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 40A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 32A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 80A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 63A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 40A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 32A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations / or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 25A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 25A 2P 30ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 6 TO 32A 1P 10KA Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Wide Range of Current Ratings – 0.5A to 125A Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 WAY Incomer- 8 Incomer-8 Outgoing- 4+4+4 IK 09 Vertical TPN DB with Modular Incomer, IK 08-for single door DBs, IK 09-for double door DBsAvailable in CRCA sheet steel, RAL 9003, powder coatedReady to use DBs - Provided with insulated vertical phase bus-bars | neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labelsWith provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP/TP MCBs as outgoings .

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 63A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 6 to 20A 3P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 6 TO 32A 1P 10KA Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Wide Range of Current Ratings – 0.5A to 125A Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•

ELECTRICAL WORKS- UPS & INVERTER BATTERY ACCESSORIES Supplying, Loading, Unloading, Installations,Testing , Commissioning of expandable moduler IGBT BASED 80KVA (20kva modules) UPS 3 PHASE INPUT & 3 PHASE OUTPUT with reversal protection, Nominal Voltage 415 V AC (3 Ph + N), +/- 15% Frequency 50 Hz, +/- 1%. Thd I <= 3% (at full load and Vthd<1%), Power Factor -  0.99 Inverter Bridge Space Vector Modulation & IGBT Technology Qty. Similer to DELTA make Modular UPS 80 kVA NH + frame 4 X 20 kVA power module with SNMP /Modbus Card.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of SMF battery set, Battery Bank Rack, and battery connecting accessories for 80 KVA incloding all terminals and enter battery cabling SMF batteries 12V 150Ah 40 Nos. SMF Batteries for 30 Mins Backup (72000VAH) / Quanta or Equivalent make.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Inverter of 50KVA, Three phase input and output with Tubular Battery(12X30) 200 AH Duration 4 Hrs. as per specification.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 100/125 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going/UPS & INVERTER

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 160 / 200 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going UPS & INVERTER.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 250 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 315/400 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of XLPE unarmoured cable 1 core 50 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe for Inverter .

Supplying, Loading, Unloading, Installations,Testing , Commissioning of XLPE unarmoured cable 1 core 95 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe for UPS..

ELECTRICAL WORKS- LIGHT AND FAN SUSPENSION ACCESSORIES Supplying, Loading, Unloading, Installations,Testing , Commissioning of Light Suspension Kit Stainless Steel Hang Rope Hook Galvanized Steel Cable Hanging lights Grow light Fixtures Max.Workpiece Weight:10kg/22lbs(Small), 15kg/33lbs(Big) SteelLength:320mm(Small), 510mm(Big) Weight:30g(Small), 50g(Big) Feature:ROHS. as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of „B‟ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. as Directed by Engineer Incharge.

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 to 12 mm dia x 75 mm long with necessary materials for ceiling fan. Load bearing: 250 kg Screw diameter: approx 16mm / 0.6 inch. as Directed by Engineer Incharge.

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations,Testing , Commissioning of Copper Flexible lead cables upto Chiller panel 185 sq.mm x 1 core used for RYBN phase. as Directed by Engineer Incharge.

FIRE SEALANT FOR PIPE AND DUCT HOLES AND ANY OTHER. Supplying, Loading, Unloading, Installations, Testing , Commissioning of fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler. as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations, Testing , Commissioning of 75 mm internal dia. 3.5 mm thk. (weight approx. 6.66 Kg./Rm.) centrifugally cast C. I. pipes Confirming to IS 3989, sockets spigots type pipe for rain water/soil waste and ventilation with all fittings including scffolding, 1 : 1 CM jointing proper embedding and fixing on wall & column etc complete as directed. as Directed by Engineer Incharge.

Supplying, Loading, Unloading, Installations, Testing , Commissioning of 100 mm internal dia. 3.5 mm thk. (weight approx. 6.66 Kg./Rm.) centrifugally cast C. I. pipes Confirming to IS 3989, sockets spigots type pipe for rain water/soil waste and ventilation with all fittings including scffolding, 1 : 1 CM jointing proper embedding and fixing on wall & column etc complete as directed./ or equivalent / as Directed by Engineer Incharge.

Providing and fixing Bib cock stop tap brass heavy 15mm including necessary socket union nut complete.

Supply / Installation / Testing / commissioning of Brass Chromium plated body Ball Valve with necessary fitings. Supply / Installation / Testing / commissioning of 50 MM DIA as Directed by Engineer Incharge.

RO PLANT Supplying, Loading, Unloading, Installations, Testing, Commissioning of 3000 LPH RO PLANT having following specifications & As per Engineer In charge. a) PLANT CAPACITY-Treatment flow 3000 Litre/hr, Operating Hrs. 8 hrs/day (b) INLET PARAMETERS- pH 7.6,Turbidity 0.2 NTU,Total Hardness (As CaCO3) 300 mg/lit, Chlorides 196 mg/lit, Total Alkalinity 283 mg/lit, TDS 150 mg/lit. (c ) OUTLET PARAMETERS(After Tertiary Treatment) pH 6.5 – 8.5, Turbidity ≤1 NTU, Total Hardness (As CaCO3) ≤ 25 mg/lit , Suspended Solids ≤ 05 mg/lit , Chlorides ≤ 01 mg/lit, TDS <25 mg/lit . d) RAW WATER PUMP- Type Horizontal Centrifugal Capacity 6m3/ Hr , Head Mtr 30, Power 1.10 kw / 3 phase, MOC of Body Cast Iron, MOC of Impeller SS 316, MOC of Shaft SS 316, Pipe Size at Suction mm 32, Pipe Size at Discharge mm 25, Make CRI/Grundfos/xylem , Quantity No. 2 e)PRESSURE SAND FILTER - Capacity 6m3/ hr , Make Aventura/ Pentair/ Equivalent Diameter mm 600, HOS mm 1500, MOC FRP, Piping Size NB 40, Valves Type Top Mounted Multiport Valve, MOC of Valve PP, Filter Media Multi grade Sand, Media Quantity Kg 500 Kg, Maximum Working Pressure Kg/cm2 3.5, f) ACTIVATED CARBON FILTER - Capacity m3/ hr. 6, Make Aventura/ Pentair/ Equivalent, Diameter mm 600, HOS mm 1500, MOC FRP, Piping Size NB 40, Valves Type Top Mounted Multiport Valve, MOC of Valve PP, Filter Media Multi grade Sand, Media Quantity Kg 500 Kg, Maximum Working Pressure Kg/cm2 3.5, Quantity Nos 1 g) MICRON FILTER - Capacity m3/hr 2, Size 4” Dia x 20” long, Type Spun Micron, Pore Size 5 Micron, MOC PP, Quantity Nos 3 h) ANTISCALING DOSING SYSTEM -Capacity LPH 6, Type Metering, Power 0.013 kw, Make E dose/ Equivalent, Tank MOC HDPE, Quantity No 1 No. i) HIGH PRESSURE PUMP- Type Vertical Multistage Pump, Capacity m3/hr 5, Head m 110, Power HP 5, MOC Of Body CI, MOC of Impeller SS 316, MOC of Shaft mm SS 316, Make CRI/Grundfos/xylem, Quantity No. 2 j) REVERSE OSMOSIS MEMBRANE- Type Spiral Wound, Capacity LPH 3000, Membrane Size 8” Dia x 40” length, Three Element, Recovery No 60 - 70% , Membrane Make GE/Hydranautics/Equivalent, MOC of Membrane PVDF, Membrane Housing 8” Dia x 40” length, Two Elements, No. of Housing 1 No. (Three Elements), MOC of Housing SS 316, No. of Membrane No 3, Housing Make UKL/ Equivalent, RO Skid SS 304, Material for Skid No. Square Tube, Quantity Lot 1/ or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of stainless steel pipes 15 mm 1mm thick Make-Jindal conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 1100 centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of Jindal approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -200 to 1100 C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete/ or equivalent / as Directed by Engineer Incharge..

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of stainless steel pipes 20 mm 1.2mm thick Make-Jindal conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 1100 centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of Jindal approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -200 to 1100 C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. / or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of stainless steel pipes 25 mm 1.2mm thickMake-Jindal conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 1100 centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of Jindal approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -200 to 1100 C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. / or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of stainless steel pipes 32 mm 1.5mm thick Make-Jindal conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 1100 centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of Jindal approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -200 to 1100 C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. / or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of stainless steel pipes 40 mm 1.5mm thick Make-Jindal conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 1100 centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of Jindal approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -200 to 1100 C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. / or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of stainless steel pipes 50 mm 1.5mm thick Make-Jindal conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 1100 centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of Jindal approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -200 to 1100 C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. / or equivalent / as Directed by Engineer Incharge.

ETP PLANT: Design, supply, installation, testing and commissioning of 50 KL ETP PLANT having following specifications & As per Engineer In charge. PLANT CAPACITY 50 KLD ETP Treatment flow 3 m3/hr ,Operating 18Hrs INLET PARAMETERS-pH 7.7 -8.1,COD 500 -600 mg/lit,BOD (5 days @ 25 0 C) 300-400 mg/lit, Suspended Solids 400-600 mg/lit,Oil & Grease 50 - 60 mg/lit, OUTLET PARAMETERS(After Tertiary Treatment),pH 6.5 – 7.5 ,COD≤ 50 mg/lit,BOD (5 days @ 25 0 C) ≤ 10 mg/lit, Suspended Solids≤ 10 mg/lit, Oil & Grease≤ 10 mg/lit ETP -50 KLD Bar screen Medium & Fine ,MOC SS 304,Perforation 4mm, Size in mm 600 x 800,Quantity No 1, Influent Transfer Pump, Submersible Type, Capacity 3M3/Hrs, Head 15Mtr, Power 0.5HP, MOC of Pump SS 316, MOC of Shaft & Pump SS316, Make CNP/Equivalent, Quantity 2 Nos. (1W + 1 SB), Air Blowers Capacity 91M3/Hrs, Pressure 0.4kg/cm2, Type Twin Lobe, Service Continuous, Type of Drive V Belt, Motor rating 3HP, Blowers Speed 1400 RPM, Discharge 40 mm, Air Distribution Aeration Grid Make Airvak/Everest/Kay Quantity 2Nos. Air Blowers Capacity 110m3/hr, Pressure 0.4kg/cm2,Type Twin Lobe Service Continuous, Motor rating 3HP, MOC of Body Cast Iron, Air Distribution Aeration Grid, Discharge Size 40 mm, Make Airvak/Everest/Equivalent, Quantity 2Nos, Lime Dosing System - Capacity 12LPH, Type Metering, Make E-Dose /Equivalent, Power 0.13 kw, MOC of Pump Poly Propylene, Dosing Tank Capacity 100Ltr, MOC Of Tank LDPE/HDPE, Quantity 1No, Type Of Mixing Agitator, Speed 60RPM, MOC MSEP, Quantity No.1, Alum Dosing System, Capacity 12LPH, Type Metering, Make E-Dose / Equivalent, Power 0.13 kw, MOC of Pump Poly Propylene, Dosing Tank Capacity 100Ltr, MOC Of Tank LDPE/HDPE, Quantity 1No, Type Of Mixing Agitator, Speed RPM 60, MOC MSEP, Quantity 1No, Flocculator-Capacity 1m3/hr Speed 72RPM, Power 0.13 kw,Make Universal Aqua Technology/Equivalent ,MOC MSEP,Quantity 1No ,Poly Electrolyte Dosing System, Capacity 6LPH, Type Metering, Make E-Dose/ Equivalent, Power 0.013 kw, MOC of Pump Poly Propylene, Dosing Tank Capacity Ltr. 100,MOC Of Tank LDPE/HDPE Quantity 1No, Type Of Mixing Agitator-Speed RPM 60, MOC MSEP, Quantity No. 1 Tube Media-MOC PVC, Shape of tube Square, Thickness 1.0 to 1.2 mm, Vertical Height 520 mm, Max. Working temp. 45° deg. C, Quantity 2m2. Sludge Transfer Pump Type Self-priming, Capacity 2m3 / hr, Head 14 M, MOC CI, Solid Handling Capacity 7-10 mm, Power 0.5HP, Make Kirloskar/ Equivalent, Quantity 2Nos. Filter Feed Pump- Type Horizontal Centrifugal Pump, Capacity 3m3/hr, Head 30Mtr, Power 1HP, Pump Size at Suction 25mm, Pump Size at Discharge 25mm, MOC CI, Make Kirloskar/Equivalent, Quantity 2Nos, Pressure Sand Filter- Capacity 3m3/ hr, Make SGI, Diameter 600 mm, HOS 1500 mm, Shell Thickness 5mm, Disk Thickness 5mm, MOC MSEP, Frontal Piping MSEP, Piping Size 40 NB, Valves Type Butterfly valve, Filter Media 500 Kg Multi grade Sand, Test Pressure 5.5Kg/cm2, Maximum Working Pressure 3Kg/cm2, Quantity 1No. Activated Carbon Filter- Capacity 3m3/hr, Make SGI, Diameter 600mm, HOS 1500mm, Shell Thickness 5mm 5, Disk Thickness 5mm 5, MOC MSEP, Frontal Piping MSEP, Piping Size 40 NB, Valves Type Butterfly valve, Filter Media 200 Kg Sand + 150 kg Activated Carbon, Test Pressure Kg/cm2 5.5, Maximum Working Pressure 3Kg/cm2, Quantity 1No. Centrifuge Unit- Capacity 2m3/hr, Make NES/ Apollo/ Equivalent, Size 12”, Basket Speed 1200RPM, Bag Type Perforated, Solid Handling Capacity 5Kg/18 litre, Power 1HP, Quantity 1No. Ultraviolet Unit -Qty. 1No, Capacity 3m3/hr, Make Alfa/ Sukrut/Equivalent, MOC SS 316, No. of UV Lamp No. 1, Std UV Lamp Cable Length 2m, Power Per UV Lamp 90w, Operating Pressure range 0-10 Kg/cm2. Operating Temperature range 4 – 80° C, Protection Class IP 54. Interconnecting piping & fitting - Qty. 1 lot within the battery limit, MOC UPVC sch 40, Make Prince/ Astral/ Equivalent, Piping for Air MS/GI, Make TATA/ Jindal. Electrical control panel and Equipment’s-(With BMS COMPATIBLE (bacnet support/modbus, open protocall) Electrical Control Panel 1 No, Cabling 1 lot, Type Automatic, Cable Tray 1 lot, PLC 1 no. (ETP MANUFACTURER-SGI/ EVERGREEN/ SHREE WATER TREATMENT/ BRISANZA/ OXYBEE)

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of Grease trap (0.60m liquid height) constructed out of 230 mm brick masonry with PVC Tee connection for inlet outlet & vent, DI MD Manhole cover and frame (Cover size 0.9 x 0.45 m wide 2 nos.) , 40 mm thick Kaddappa baffle wall situated across the chamber. Trap shall be internally smooth plastered with internal & externally Complete with 2 Nos 0.4 M x 0.85 M x 0.1 M high SS 304. perforated trey's with handles on both side including all accessories mounting. complete as specified in drawing/ or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :/ or equivalent / as Directed by Engineer Incharge.

Constructing brick masonary inspection chamber rectangular 0.9M x 0.6M and 0.6M deep -do- including M 20, 30 cm thick cap c.c. Bedding & including C.I. other RA heavy duty air tight frame and cover weighing minimum 270kg complete as per description in item No. SE-8-1 with necessary centering etc. allcomplete as per plan and directed./ or equivalent / as Directed by Engineer Incharge.

Constructing on sewer brick masonry conical manholes 1.2M dia. at bottom 0.56 M. dia. at top, built in brick masonry in cement mortar 1:3, plastered both inside and outside with 20 mm thick cement mortar 1:2 and neat cement rendering so as to give a smooth surface, including 300 mm thick M.15 cement concrete in foundation and in haunches and channels finished smooth with 20mm thick cement plaster in cement mortar 1:1 and providing C.I. steps (weighing 5.4 kg each) staggered at 300 mm. c/c including 75mm wide vata all round the external portion of the manhole and the foundation concrete in cement mortar 1:1 and supporting the incoming pipes with brick masonry wherever necessary including C.I. other RA heavy duty (EHD) air-tight circular frame & cover (minimum 230 Kg.) with hinge/chain resting on 30 cm high cement concrete M.20 cap with necessary centering etc. all complete as per standard specifications and directions including finishing the cap with cement plaster on both sides 1:2 and neat cement rendering so as to give a smooth surface in line and level with the brick masonry surface and as per drawing in DyCh.E.(Sewerage)P&D's office without excavation depth upto 1.5 M.(Depth of Manhole measured from top of manhole cover to Invert level of manhole) / or equivalent / as Directed by Engineer Incharge.

FIRE FIGHTING WORKS Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of M.S Air vessel (air cushion tank) on top of each 150 mm dia. wet riser 300 mm dia. and 1200 mm high with necessary cut off, air release valve to release water hammers and air locks as necessary, including two coats of enamel paint of approved colour over a primer coat after testing, complete as specified./ or equivalent / as Directed by Engineer Incharge.

Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings as per specification no. FF-PP/ or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of 150 mm installation control valve with 24 V hooter; connection at pump room and fire console room complete with drain pipe leading to drain, cabling, pressure & flow switches,Bell etc.complete. (For sprinkler system)/ or equivalent / as Directed by Engineer Incharge.

Supplying & installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete./ or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete ./ or equivalent / as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of G.I.pipe above ground of ‘C’ class ERW of size 32mm dia with necessary fittings as per specification no. FF-PP/ or equivalent / as Directed by Engineer Incharge.

Supplying & Installing cast iron double flange butterfly valve of size 250 mm dia. as per specification No. FF-VL/BFV/ as Directed by Engineer Incharge.

Supplying & Installing cast iron double flange butterfly valve of size 200 mm dia. as per specification No. FF-VL/BFV/ as Directed by Engineer Incharge.

Supplying and installing double flange NRV of size 50 mm dia as per specification No. FF-VL/NRV/ as Directed by Engineer Incharge.

Supplying and installing double flange NRV of size 200 mm dia as per specification No. FF-VL/NRV/ as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV/ as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of 100 mm dia end line strainer for +ve suction./ as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of 150 mm dia end line strainer for +ve suction./ as Directed by Engineer Incharge.

Supplying, Loading, Unloading, fixing, jointing Installations, Testing , Commissioning of specially designed gun metal orifice plates on hydrant outlets including distance pieces of suitable size for adjustment of delivery pressure complete with necessary companion flanges, nuts, bolts, gaskets etc. complete as specified. as Directed by Engineer Incharge.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall./ or equivalent / as Directed by Engineer Incharge.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 9/10 kg capacity with necessary clamp for erection on Wall. as Directed by Engineer Incharge.

Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. as Directed by Engineer Incharge.

Supplying and erecting D.C.P. type fire extinguisher 9/10 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete./ or equivalent / as Directed by Engineer Incharge.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete./ or equivalent / as Directed by Engineer Incharge.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with other RA handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete./ or equivalent / as Directed by Engineer Incharge.

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 100MM / or equivalent / as Directed by Engineer Incharge.

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 150MM / or equivalent / as Directed by Engineer Incharge.

Supplying, installation, testing & commissioning of sprinkler flexible pipe 1500mm(UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required./ or equivalent / as Directed by Engineer Incharge.

CHILLERS Supply, Installation, Testing & Commissioning of 200 TR (ACTUAL CAPACITY), AIR COOLED SCREW CHILLERS complete with single / multiple, hermetic / semi hermetic, rotary signle/twin screw compressors Air cooled condensers, chillers with victaulic grooves, Refrigerant, oil, micro-Processor Control panel with open protocol for hook up with BMS, unit mounted IP54,Star Delta Strater . Single/Double refrigerant circuit, elec panels, isolators, victaulinc / flange connections,The Evaporator shall be flooded type. Blygold coating & fins with anticorrosive coating Condensors Fins and Tubes/Pipes.All coatings must be rated for minimum 4000 hours of salt spray test.The Quoted price should also include lifting shifting of the chiller upto the terrace of the building and a mximum height of upto 15 Mtr (bldg height is 10 mtr). BMS Compatibility including BMS Card. Vibration Isolator: Rust Resistant Spring Isolators with neoprene pads for Air Cooled Chiller- 1 Set with each chiller Victaulic Couplings (chilled water )- 1 Set with each chiller Motor shall be suitable for 415 V +5%, 50 C/S, 3 Phase, AC supply. Refrigerant used shall be R 134a as mentioned in Specifications Chiller Chilled Water Inlet/outlet Temp.:- 53.6 / 44.6 Deg F ( 12 C / 7 C) Fouling Factor 0.0001 FPS, Noise Level, Maximum Noise Level 72 dbA or better at 3 meter distance, 200 TR at above conditions,Full Load C.O.P. at design conditions 2.8 , Full Load C.O.P. at ARI conditions 3.1, NPLV of 4.18 or Better Note- All Equipment, chillers, AHU's, Pumps quantities shall be procured as per Approved shop Drawing./ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Flexible Bellow as per Technical Specifications of 125 MM DIA/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Flexible Bellow as per Technical Specifications of 150 MM DIA/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Hardware & software required for integration of chiller microprocessor with BMS system/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Chiller Plant Manager to control Chillers, Primary Pumps, Secondary Pumps & Motorized Isolation Valves/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Water Circulating Centrifugal Pumps.Primary Chilled Water Pumps Supply, Installation, Testing & Commissioning of Cenrifugal Back Pull Out, End Suction,Flexible coupled supplied with Cast Iron housing, Bronze Impeller & Shaft Mechanical seals with TEFC motor suitable for 3 Phase, 415 V + 10%, 50 c/s, AC Power supply mounted on common base frame etc. having spring type isolator With Sutaible speed RPM. Water Flow rate (Each Pump) - 540 USGPM System, Head 16 Meter,(2 No. working + 1 No. standby)./ or equivalent / as Directed by Engineer Incharge.

Secondary Chilled Water Pumps Supply, Installation, Testing and Commissioning of Back Pull Out, Secondary Centrifugal pump sets with Cast Iron casing & bronze Impeller & Shaft seals with TEFC motor suitable for 3 Phase, 415 V + 10 %, 50 c/s, AC Power supply mounted on common base frame etc. The pump shall be duly insulated ,Micro-processor based VARIABLE SPEED PUMPING SYSTEM consisting of variable frequency drive (VFD) for three secondary pump including one standby, three nos. differential pressure transducer along with microprocessor based pump controller complete with pumping software & along with required sensor / Transmitters (2 Working & 1 Standby) Water Flow rate (Each Pump) - 660 USGPM System Head 26 Meter (2 No. working + 1 No. standby)./ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 32 MM DIA 2-Way Motorized Modulating Valve controller & proportionating thremostat/ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 40 MM DIA 2-Way Motorized Modulating Valve controller & proportionating thremostat/ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 50 MM DIA 2-Way Motorized Modulating Valve controller & proportionating thremostat/ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 65 MM DIA 2-Way Motorized Modulating Valve controller & proportionating thremostat/ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 20 MM DIA-FCU/CASSETTE ON/OFF Type Control Valve with Thermostat/ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 25 MM DIA-FCU/CASSETTE ON/OFF Type Control Valve with Thermostat/ or equivalent / as Directed by Engineer Incharge.

AHU/ FCU Controls : SITC of FCU/AHU Control valves, Thermostat, Interconnection wiring up to Panel etc. Supply, Installation, Testing & Commissioning of 32 MM DIA-FCU/CASSETTE ON/OFF Type Control Valve with Thermostat/ or equivalent / as Directed by Engineer Incharge.

Chilled Water Piping Supply, Installation, Testing & commissioning of M.S. 'C' class Varoius Diameter of piping confirming to IS: 1239/3569 heavy class Chilled water piping including all necessary fitting like anchor fasteners, pipe supporting frame structure, couplings, seamless bends, elbows, Tees, union, reducers, expander ASA 150 ISRF flanges, CAF gaskets, nuts & bolts etc. All indoor piping & valves insulated 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' Nitrile Rubber finished with factory fabricated black Glass cloth as per specifications. All expose piping & valves insulated with Nitrile Rubber finished with factory fabricated black Glass cloth and UV paint as per specifications. Note - The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. Supply, Installation, Testing & Commissioning of 200 MM DIA (32 mm thick insulation)/ or equivalent / as Directed by Engineer Incharge.

Chilled Water Piping Supply, Installation, Testing & commissioning of M.S. 'C' class Varoius Diameter of piping confirming to IS: 1239/3569 heavy class Chilled water piping including all necessary fitting like anchor fasteners, pipe supporting frame structure, couplings, seamless bends, elbows, Tees, union, reducers, expander ASA 150 ISRF flanges, CAF gaskets, nuts & bolts etc. All indoor piping & valves insulated 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' Nitrile Rubber finished with factory fabricated black Glass cloth as per specifications. All expose piping & valves insulated with Nitrile Rubber finished with factory fabricated black Glass cloth and UV paint as per specifications. Note - The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. Supply, Installation, Testing & Commissioning of 250 MM DIA (32 mm thick insulation ) / as Directed by Engineer Incharge.

Valves & Fittings With PN 16 pressure rating and its insulation thickness will be its connected piping insulation repectively Supply, Installation, Testing & Commissioning of Wafer Swing Check Valves as per Technical Specifications Supply, Installation, Testing & Commissioning of 150 MM DIA / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 32 MM DIA Butterfly Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 40 MM DIA Butterfly Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 50 MM DIA Butterfly Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 65 MM DIA Butterfly Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 125 MM DIA Butterfly Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 150 MM DIA Butterfly Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 125 MM DIA- Motorized Actuator with Controller Wiring. / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 20 MM DIA "Y" Strainers as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 32 MM DIA "Y" Strainers as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 40 MM DIA "Y" Strainers as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 50 MM DIA "Y" Strainers as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 65 MM DIA "Y" Strainers as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 150 MM DIA "Y" Strainers as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 32 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 40 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 50 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 65 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 80 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 100 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 125 MM DAI Balancing Valves as per Technical Specifications / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning of Forged Brass Chromium plated body Ball Valve of PN-16 rating with two coats of Zinc Chromate paint for anti-rust and then shall be finally painted with Epoxy paint of required colour including all fittings like valves, flanges and unions, etc. in position conforming to technical specifications:necessary ancillaries like hot dipped galvanized nut & blots & washers,rubber gaskets, washers, matching flanges,sockets, coupling etc (For Drain) Supply, Installation, Testing & Commissioning of 15 MM DIA / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning of Forged Brass Chromium plated body Ball Valve for AHU/CSU/FCU/CASSETTE of PN-16 rating with two coats of Zinc Chromate paint for anti-rust and then shall be finally painted with Epoxy paint of required colour including all fittings like valves, flanges and unions, etc. in position conforming to technical specifications:necessary ancillaries like hot dipped galvanized nut & blots & washers,rubber gaskets, washers, matching flanges,sockets, coupling etc Supply, Installation, Testing & Commissioning of 20 MM DIA / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning of Forged Brass Chromium plated body Ball Valve for AHU/CSU/FCU/CASSETTE of PN-16 rating with two coats of Zinc Chromate paint for anti-rust and then shall be finally painted with Epoxy paint of required colour including all fittings like valves, flanges and unions, etc. in position conforming to technical specifications:necessary ancillaries like hot dipped galvanized nut & blots & washers,rubber gaskets, washers, matching flanges,sockets, coupling etc Supply, Installation, Testing & Commissioning of 25 MM DIA / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning of Forged Brass Chromium plated body Ball Valve for AHU/CSU/FCU/CASSETTE of PN-16 rating with two coats of Zinc Chromate paint for anti-rust and then shall be finally painted with Epoxy paint of required colour including all fittings like valves, flanges and unions, etc. in position conforming to technical specifications:necessary ancillaries like hot dipped galvanized nut & blots & washers,rubber gaskets, washers, matching flanges,sockets, coupling etc Supply, Installation, Testing & Commissioning of 32 MM DIA / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning of Forged Brass Chromium plated body Ball Valve for AHU/CSU/FCU/CASSETTE of PN-16 rating with two coats of Zinc Chromate paint for anti-rust and then shall be finally painted with Epoxy paint of required colour including all fittings like valves, flanges and unions, etc. in position conforming to technical specifications:necessary ancillaries like hot dipped galvanized nut & blots & washers,rubber gaskets, washers, matching flanges,sockets, coupling etc Supply, Installation, Testing & Commissioning of 25 MM DIA- Ball Valve With Strainer / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning of Forged Brass Chromium plated body Ball Valve for AHU/CSU/FCU/CASSETTE of PN-16 rating with two coats of Zinc Chromate paint for anti-rust and then shall be finally painted with Epoxy paint of required colour including all fittings like valves, flanges and unions, etc. in position conforming to technical specifications:necessary ancillaries like hot dipped galvanized nut & blots & washers,rubber gaskets, washers, matching flanges,sockets, coupling etc Supply, Installation, Testing & Commissioning of 20 MM DIA- Ball Valve With Strainer / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Dial Type Pressure Gauge the of approved Make & Range 0-10 Kg/cm2 & Dial Size 100mm. As per technical specification mention in tender. / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Temp Gauge with thermowell of approved Make & Range 0-50 Deg C , Dial Size 100 mm.The Temp. Guage to be of Industrial type and all Internal working Parts in SS 304 Quality. Sensor Probe Length - apx. 200mm.As per technical specification mention in tender. / as Directed by Engineer Incharge.

AIR HANDLING EQUIPMENT Supply, Installation, Testing, Commissioning of Double Skin Floor Mounted Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section SISW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 11.0 TR - 4200 CFM / 65mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / Mixing Box (Appox. VFD Rating - 2.24KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) With Canopy For Dialysis / or equivalent / as Directed by Engineer Incharge.

AIR HANDLING EQUIPMENT Supply, Installation, Testing, Commissioning of Double Skin Floor Mounted Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section SISW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 15.0 TR - 5800 CFM / 50mm St.Pr. / 10µ & 20µ COMBINATION FILTER /UVGI Lamp (Appox. VFD Rating - 2.24KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) For Strile Area/ or equivalent / as Directed by Engineer Incharge.

AIR HANDLING EQUIPMENT Supply, Installation, Testing, Commissioning of Double Skin Floor Mounted Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section SISW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 18.0 TR- 2800 CFM (100% FA) / 65mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / UVGI LAMP / Exhaust Fan(2800 CFM) (Appox. VFD Rating - 1.50KWx2 +VFD and Stater Panel+Harmonic Filter (Thid<30%)) With Canopy For TB Ward/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 7.0 TR - 2400 CFM / 40mm St.Pr. / 10µ & 20µ COMBINATION FILTER(Appox. VFD Rating - 0.746KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) OT And ICU Control Waiting Area/Pediatric Ward/4 Meter Corridor/MRI/CT SCAN Corridor/Procedure 3 Meter Corridor./ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning Vertical floor Mounted AHU of 7.0 TR - 2400 CFM / 40mm St.Pr. / 10µ & 20µ COMBINATION FILTER / MIXING BOX (Appox. VFD Rating - 1.12KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) MRI/CT SCAN/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 8.0 TR - 3100 CFM / 40mm St.Pr. / 10µ & 20µ COMBINATION FILTER(Appox. VFD Rating - 1.12KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Pre-OP/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 8.0 TR - 3100 CFM / 55mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / UVGI LAMP (Appox. VFD Rating - 1.50KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / NICU/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 10.0 TR - 3900 CFM / 45mm St.Pr. / 10µ & 20µ COMBINATION FILTER(Appox. VFD Rating - 1.20KW+VFD and Stater Panel+Harmonic Filter (Thid<30%))/Changing Rooms And Corridor/OPDS/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 10.0 TR - 3900 CFM / 40mm St.Pr. / 10µ & 20µ COMBINATION FILTER (Appox. VFD Rating - 1.20KW+VFD and Stater Panel+Harmonic Filter (Thid<30%))/Waiting Area and consulatnats rooms/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 11.0 TR - 4200 CFM / 50mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER /UVGI LAMP(Appox. VFD Rating - 1.50KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Post-OP/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 11.0 TR - 4200 CFM / 125mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER + 0.3µ FILTER (Appox. VFD Rating - 3.80KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Sterile Corridor/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 14.0 TR - 5400 CFM / 45mm St.Pr. / 10µ & 20µ COMBINATION FILTER (Appox. VFD Rating - 2.24KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Labs Area/LABS/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 15.0 TR - 5800 CFM / 45mm St.Pr. / 10µ & 20µ COMBINATION FILTER (Appox. VFD Rating - 2.24KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / OPDS/CHANGING ROOMS/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Floor Mounted AHU Supply, Installation, Testing & Commissioning of 15.0 TR - 5800 CFM / 60mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER (Appox. VFD Rating - 3.80KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Triage/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 15.0 TR - 5800 CFM / 55mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / UVGI LAMP + (Appox. VFD Rating - 2.24KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / ICU/PICU / ANC/PNC/LABOUR ROOM/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 16.5 TR - 6400 CFM / 50mm St.Pr. / 10µ & 20µ COMBINATION FILTER (Appox. VFD Rating - 2.24KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Administration Area/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 4.0 TR - 1600 CFM / 32mm St.Pr. / 10µ & 20µ COMBINATION FILTER (Appox. VFD Rating - 0.38KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / /Labour Waiting /Offices and waiting area/ BMS Area/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 4.0 TR - 1600 CFM / 40mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER (Appox. VFD Rating - 1.12KW+VFD and Stater Panel+Harmonic Filter (Thid<30%))/Labour Room/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Ceiling Suspended Double Skin Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet.Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Unit should be internally accoustic insulated because of noise absorbtion. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Supply, Installation, Testing & Commissioning of 5.0 TR - 2000 CFM / 40mm St.Pr. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER (Appox. VFD Rating - 0.56KW+VFD and Stater Panel+Harmonic Filter (Thid<30%)) / Post OP Hold / Procedure Rooms/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Double Skin Floor Mounted Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable, Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with SISW/DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. All AHU suitable for outdoor condition. Supply, Installation, Testing & Commissioning of 9.00TR / 2,500 CFM / 150 MM ST.PR. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / MIXING BOX / UVGI LAMP / DEFUMIGATION FAN / HOT WATER COIL (Appox. VFD Rating - 3.73KW+VFD and Stater Panel+Harmonic Filter (Thid<5%) +Auto Bypass Starter)/6 KW (2 KW- 3Nos.) HEATER BANK WITH HUMIDIFISTAT (FOR HUMIDITY CONTROL) With Conpy For AHU And Exhaust Fan With 1200 CFM Defumigation Fan For C-section OT./ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Double Skin Floor Mounted Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable, Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with SISW/DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. All AHU suitable for outdoor condition. Supply, Installation, Testing & Commissioning of 14.00TR / 3,800 CFM / OT / 150 MM ST.PR. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / MIXING BOX / UVGI LAMP / DEFUMIGATION FAN / HOT WATER COIL (Appox. VFD Rating - 5.60KW+VFD and Stater Panel+Harmonic Filter (Thid<5%) +Auto Bypass Starter)/6 KW (2 KW- 3Nos.) HEATER BANK WITH HUMIDIFISTAT (FOR HUMIDITY CONTROL) For Septic OT./ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing, Commissioning of Double Skin Floor Mounted Air Handling unit with thermal break profile and internal coving, double skin panels minimum 43±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Filter washable Combination filter of 90% down 20 to 10 micron(MERV 5 & MERV 7 ) + 99% down to 3 Microns (MERV 13 ) , The AHU shall comprise of Fresh Air Module with EU4 (MERV-7) filter and volume control damper, Mixing Chamber, Coil Section with min. 6/8 Row Chilled water coil, Four Pass PVC Moisture Eliminator Removable, Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with SISW/DIDW centrifugal imported fan driven by High Energy Efficient (EFF1) motor and assembly. AHU Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft suitable for Manual & Motorised operation & Necessary cabling & earthing strip. Limit switches for AHU doors, inspection lamps with fire proof Double Canvass connection (Fungal and Lint free). Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. All AHU suitable for outdoor condition. Supply, Installation, Testing & Commissioning of 14.00TR / 3,800 CFM / OT / 150 MM ST.PR. / 10µ & 20µ COMBINATION FILTER / 3µ FILTER / MIXING BOX / UVGI LAMP / DEFUMIGATION FAN / HOT WATER COIL (Appox. VFD Rating - 5.60KW+VFD and Stater Panel+Harmonic Filter (Thid<5%) +Auto Bypass Starter)/6 KW (2 KW- 3Nos.) HEATER BANK WITH HUMIDIFISTAT (FOR HUMIDITY CONTROL) With 1200 CFM Defumigation Fan / With Conpy For AHU And Exhaust Fan For Major OT-01/OT-02/OT-03/OT-04/ or equivalent / as Directed by Engineer Incharge.

CASSETTE UNITS Supply, Installation, Testing & Commissioning of water Cooled Cassette, Horizontal Ceiling suspended type, Powder coated,as given below Supply ,Installation ,Testing and commissioning of Chilled Water Four Way Cassette Units, complete with copper tube aluminum finned coil 2/3 row deep chilled water coil, shall be with factory fitted with complete valve station consists of copper piping and maniflods & drain pan, Pre- filters, high efficiency centrifugal fan easily cleanable synthetic filter, and Supply Remote control suitable for connect to DIGITAL THERMOSTAT to operate temeprature and On/Off with necessary power and control wiring with PVC conduit etc. for the opreration of a 3 speed fan & Temperature control. other accessories etc. 3C x 1.5 Sq.mm.Power cable of 3 mtr.length with 3 pin plug top from unit motor to the nearest power socket shall be included in the scope of supply. 2 way ON/OFF Control chilled water valve will be of PN16 rating complete with motor 220/230 volt of actuator of suitable torque.The valve should be IEC 534 compliant , have 20 mm stroke.All necessary supporting hanger, MS structure for supporting units, anchor fastners, nut , bolts etc. to be included in the scope .All Cassette units shall be suitable for 220±6% volts, 50 cycles single phase power supply.Cassette unit shall be of following arrangement and of cooling capacity as mentioned below :Necessary cabling with perforated cable trey & earthing strip unit motor to scocket. Supply, Installation, Testing & Commissioning of 4.0 TR [1000 CFM]/ or equivalent / as Directed by Engineer Incharge.

CASSETTE UNITS Supply, Installation, Testing & Commissioning of water Cooled Cassette, Horizontal Ceiling suspended type, Powder coated,as given below Supply ,Installation ,Testing and commissioning of Chilled Water Four Way Cassette Units, complete with copper tube aluminum finned coil 2/3 row deep chilled water coil, shall be with factory fitted with complete valve station consists of copper piping and maniflods & drain pan, Pre- filters, high efficiency centrifugal fan easily cleanable synthetic filter, and Supply Remote control suitable for connect to DIGITAL THERMOSTAT to operate temeprature and On/Off with necessary power and control wiring with PVC conduit etc. for the opreration of a 3 speed fan & Temperature control. other accessories etc. 3C x 1.5 Sq.mm.Power cable of 3 mtr.length with 3 pin plug top from unit motor to the nearest power socket shall be included in the scope of supply. 2 way ON/OFF Control chilled water valve will be of PN16 rating complete with motor 220/230 volt of actuator of suitable torque.The valve should be IEC 534 compliant , have 20 mm stroke.All necessary supporting hanger, MS structure for supporting units, anchor fastners, nut , bolts etc. to be included in the scope .All Cassette units shall be suitable for 220±6% volts, 50 cycles single phase power supply.Cassette unit shall be of following arrangement and of cooling capacity as mentioned below :Necessary cabling with perforated cable trey & earthing strip unit motor to scocket. Supply, Installation, Testing & Commissioning of 3.0 TR [800 CFM]/ or equivalent / as Directed by Engineer Incharge.

CASSETTE UNITS Supply, Installation, Testing & Commissioning of water Cooled Cassette, Horizontal Ceiling suspended type, Powder coated,as given below Supply ,Installation ,Testing and commissioning of Chilled Water Four Way Cassette Units, complete with copper tube aluminum finned coil 2/3 row deep chilled water coil, shall be with factory fitted with complete valve station consists of copper piping and maniflods & drain pan, Pre- filters, high efficiency centrifugal fan easily cleanable synthetic filter, and Supply Remote control suitable for connect to DIGITAL THERMOSTAT to operate temeprature and On/Off with necessary power and control wiring with PVC conduit etc. for the opreration of a 3 speed fan & Temperature control. other accessories etc. 3C x 1.5 Sq.mm.Power cable of 3 mtr.length with 3 pin plug top from unit motor to the nearest power socket shall be included in the scope of supply. 2 way ON/OFF Control chilled water valve will be of PN16 rating complete with motor 220/230 volt of actuator of suitable torque.The valve should be IEC 534 compliant , have 20 mm stroke.All necessary supporting hanger, MS structure for supporting units, anchor fastners, nut , bolts etc. to be included in the scope .All Cassette units shall be suitable for 220±6% volts, 50 cycles single phase power supply.Cassette unit shall be of following arrangement and of cooling capacity as mentioned below :Necessary cabling with perforated cable trey & earthing strip unit motor to scocket.Supply, Installation, Testing & Commissioning of 1.5 TR [600 CFM]/ or equivalent / as Directed by Engineer Incharge.

Fan Coil Units Supply, Installation, Testing & Commissioning of FCU, Horizontal Ceiling suspended type, Powder coated,as given below. Supply, Installation, Testing, Commissioning of Chilled Water Fan Coil Unit with thermal break profile and internal coving, double skin panels minimum 24±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Coil Section with min. 2/4 Row Chilled water coil, Metallic Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported direct driven fan by High Energy Efficient (IE1) motor and assembly. Provide Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft & Necessary cabling & earthing strip. Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Supply Remote control suitable for connect to DIGITAL THERMOSTAT to operate temeprature and On/Off with necessary power and control wiring with PVC conduit etc. Necessary cabling with perforated cable trey & earthing strip unit motor to scocket. Supply, Installation, Testing & Commissioning of 2.5 TR [1000 CFM]/ or equivalent / as Directed by Engineer Incharge.

Fan Coil Units Supply, Installation, Testing & Commissioning of FCU, Horizontal Ceiling suspended type, Powder coated,as given below. Supply, Installation, Testing, Commissioning of Chilled Water Fan Coil Unit with thermal break profile and internal coving, double skin panels minimum 24±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Coil Section with min. 2/4 Row Chilled water coil, Metallic Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported direct driven fan by High Energy Efficient (IE1) motor and assembly. Provide Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft & Necessary cabling & earthing strip. Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Supply Remote control suitable for connect to DIGITAL THERMOSTAT to operate temeprature and On/Off with necessary power and control wiring with PVC conduit etc. Necessary cabling with perforated cable trey & earthing strip unit motor to scocket. Supply, Installation, Testing & Commissioning of 2.0 TR [800 CFM]/ or equivalent / as Directed by Engineer Incharge.

Fan Coil Units Supply, Installation, Testing & Commissioning of FCU, Horizontal Ceiling suspended type, Powder coated,as given below. Supply, Installation, Testing, Commissioning of Chilled Water Fan Coil Unit with thermal break profile and internal coving, double skin panels minimum 24±2 mm thick fabricated out pre-plasticized 22 swg GSS on outer side and plain 22 swg Galvanized sheet on inner side with PUF insulation density not less than 40 kg/m3 sandwiched between inner and outer sheet. Coil Section with min. 2/4 Row Chilled water coil, Metallic Moisture Eliminator Removable , Sliding Type Arrangement with access door, and SS drain pan, Supply air Blower section with DIDW centrifugal imported direct driven fan by High Energy Efficient (IE1) motor and assembly. Provide Dampers to be of Extruded Aluminum Low Leakage Aerofoil Volume Control Dampers with extanded shaft & Necessary cabling & earthing strip. Junction box with contactor strip to be provided on the outer panel with positive isolation for electrical shock for heater connection. Supply Remote control suitable for connect to DIGITAL THERMOSTAT to operate temeprature and On/Off with necessary power and control wiring with PVC conduit etc. Necessary cabling with perforated cable trey & earthing strip unit motor to scocket. Supply, Installation, Testing & Commissioning of 1.5 TR [600 CFM]/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing and Commissioning of Scrubber for Kitchen each comprising of extract air intake section, electrostatic precipitation technology, dry type air cleaner to remove oil, smoke and fumes from exhaust air, as per the Specifications. It also include require co-ordination and connecting pieces to installation the scrubber along with respective exhaust air fans: Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area with 14" deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state UL Listed, Module of capacity above below CFM shall be equipped with Pulse width modulating (PWM)The system should be fitted with interlock switch for safety . The syste should allo connection to a fan section to achieve 500 FPM velocity across the air cleaner with Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Stater Panel & scrubber should be sutaible for outside condition with canopy. Supply, Installation, Testing & Commissioning of 11,000 CFM With 65mm Static/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing and Commissioning of Scrubber for Kitchen each comprising of other RAct air intake section, electrostatic precipitation technology, dry type air cleaner to remove oil, smoke and fumes from exhaust air, as per the Specifications. It also include require co-ordination and connecting pieces to installation the scrubber along with respective exhaust air fans: Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area with 14" deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state UL Listed, Module of capacity above below CFM shall be equipped with Pulse width modulating (PWM)The system should be fitted with interlock switch for safety . The syste should allo connection to a fan section to achieve 500 FPM velocity across the air cleaner with Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Stater Panel & scrubber should be sutaible for outside condition with canopy. Supply, Installation, Testing & Commissioning of 20,000 CFM With 65mm Static/ or equivalent / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning Of Double Skin Floor Mounted Kitchen exhaust SISW/DIDW Fans & Casing With Drive Package, External Grease Plenum & Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Stater Panel & unit should be sutaible for outside condition with canopy.Supply, Installation, Testing & Commissioning of 11,000 CFM With 65mm Static/ or equivalent / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning Of Double Skin Floor Mounted Kitchen exhaust SISW/DIDW Fans & Casing With Drive Package, External Grease Plenum & Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Stater Panel & unit should be sutaible for outside condition with canopy. Supply, Installation, Testing & Commissioning of 20,000 CFM With 65mm Static/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Floor Mounted FRESH AIR SISW/DIDW Fans & Casing With Drive Package Following Capacities For Kitchen double stage Airwasher. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Stater Panel & Unit should be sutaible for outside condition with canopy. Supply, Installation, Testing & Commissioning of 10,000 CFM With 50mm Static/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Floor Mounted FRESH AIR SISW/DIDW Fans & Casing With Drive Package Following Capacities For Kitchen double stage Airwasher. Necessary cabling with perforated cable trey & earthing strip stater panel to unit motor. Stater Panel & Unit should be sutaible for outside condition with canopy. Supply, Installation, Testing & Commissioning of 18,000 CFM With 50mm Static/ or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 12.50 HP(Star Delta Starter) IP-65 With Canopy / or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 10 HP(Star Delta Starter) IP-65 With Canopy / or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 7.50 HP(DOL Starter) IP-65 With Canopy / or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 5.00 HP(DOL Starter) IP-65 With Canopy / or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 0.50 HP(DOL Starter) IP-20/ or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 0.25 HP(DOL Starter) IP-20/ or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 0.20 HP(DOL Starter) IP-20/ or equivalent / as Directed by Engineer Incharge.

Electrical Panels : Supply, Installation, Testing & Commissioning of Fresh Air / Exhaust Air Fans Starter Panel Board - Panels for Indoor Application will be IP-20 and for Outdoor Application will be IP-65 Protection. All Stater panel should be BMS compatibility.Starter Panel HP is decided as per Supply, Installation, Testing & Commissioning of 0.15 HP(DOL Starter) IP-20/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of XLPE Armoured Copper cables with cable trays, suitable earthing, laying & terminations of 10 sq.mm x 4 core for Primary Pump/ or equivalent / as Directed by Engineer Incharge.

Supply, Installation, Testing & Commissioning of XLPE Armoured Aluminium cables with cable trays, suitable earthing, laying & terminations of 25 sq.mm x 4 core For Secondary Pump/ or equivalent / as Directed by Engineer Incharge.

Supply / Installation / Testing / commissioning Of Air Cooled Type Split Unit with the following components- The average distance between indoor and outdoor units 15 RMT.Indoor evaporating unit comprising of cooling coils, insulated sand-witched drain tray, 20 Micron HDPE washable filters, blower, electrical junction box etc.Outdoor condensing unit comprising of hermetic compressor, condenser coils, propeller / axial fans pressure switches / cutouts etc.Necessary Refrigerant Gas and oil charge.Inter-connected refrigerating piping of copper duly insulated with EXPANDED POLYETHYLENE SECTIONS Complete electrical power wiring of Al. & control wiring of copper required from indoor and outdoor units. Earthing of the complete system with 8 G G.I. wire.Electrical Panel will be complete with necessary starters, fuses, switches, timers, over-load relays, contactors, push button, and indicating lamps, single phasing PREVENTOR etc and ALSO WITH REMOTE CONTROL WITH CORDING.The panel should have 1 No. potential free contactor to connect with central fire detection system. The panel should also have voltage scanner to ensure stabilized power input to the machine. All outdoors units shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.The frame structure shall be mounted on MS plate & serrated rubber pads.Complete clamping and saddling of cabling work and refrigerant piping, and drain piping covered with P V C conduiting. 1.50 TR/600 CFM (5 Star Rated)/ or equivalent / as Directed by Engineer Incharge.

Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 25 mm Dia/ or equivalent / as Directed by Engineer Incharge.

Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 32 mm Dia/ or equivalent / as Directed by Engineer Incharge.

Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 40 mm Dia/ or equivalent / as Directed by Engineer Incharge.

Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 50 mm Dia/ or equivalent / as Directed by Engineer Incharge.

Providing and supplying MS Chairs Model :Lux-801 HB Technical Specification: Frame and Stand : Stainless Steel Grade 304 of guage 16 Arms : Stainless Steel capsule Pipe frame of Grade 304 of guage 16 with padding of matching Upholstery Seat & Back : 50 density foam quilted with In Composite Leather within the range of Rs.200/- per mtr. Height Adjustment : Pneumatic Gas Lift Tilt: Multilock Tilt lockable Castors: Nylon castors / or equivalent / as Directed by Engineer Incharge.

Providing and supplying MS Chairs Model :Lux-802 MB Technical Specification: Frame and Stand : Stainless Steel Grade 304 of guage 16 Arms : Stainless Steel capsule Pipe frame of Grade 304 of guage 16 with padding of matching Upholstery Seat & Back : 50 density foam quilted with In Composite Leather within the range of Rs.200/- per mtr. Height Adjustment : Pneumatic Gas Lift Tilt: Multilock Tilt lockable Castors: Nylon castors / or equivalent / as Directed by Engineer Incharge.

Provide and supplying Executive Chairs Ace Mid Back Frame & Stand: Mild Steel Powder coated of Guage 16. Seat and back : 50 density foam quilted with In Composite Leather within the range of Rs.200/- per mtr. Height Adjustment : Pneumatic Gas Lift Tilt: Syncro Tilt lockable at 1st position Castors: Nylon castors Arms: Standard Black Polyurethane arms (Executive chairs) / or equivalent / as Directed by Engineer Incharge.

Provide and supplying Staff Chairs Model : Pavo Low Back Frame & Stand: Mild Steel Powder coated of Guage 16. Seat and back : 50 density foam quilted with In Composite Leather within the range of Rs.200/- per mtr. Height Adjustment : Pneumatic Gas Lift Tilt: Syncro Tilt lockable at 1st position Castors: Nylon castors Arms: Standard Black Polyurethane arms ( staff chair )/ or equivalent / as Directed by Engineer Incharge.

Provide and supplying Visitors chairs Model :New Itsa Low Back Frame & Stand: Mild Steel Powder coated of Guage 16. Seat and back : 50 density foam quilted with In Composite Leather within the range of Rs.200/- per mtr. Height Adjustment : Pneumatic Gas Lift Tilt: Syncro Tilt lockable at 1st position Castors: Nylon castors Arms: Standard Black Polyurethane arms ( Visitors Chairs )/ or equivalent / as Directed by Engineer Incharge.

Provide and supplying Meeting Chairs Loop Low Back Frame & Stand: Mild Steel Powder coated of Guage 16. Seat and back : 50 density foam quilted with In Composite Leather within the range of Rs.200/- per mtr. Height Adjustment : Pneumatic Gas Lift Tilt: Syncro Tilt lockable at 1st position Castors: Nylon castors Arms: Standard Black Polyurethane arms ( Meeting Chairs )/ or equivalent / as Directed by Engineer Incharge.

Provide and supplying Dining chairs Gc-112 Seat and Back : 12mm thk Hotpressed wooden shell Perforated and finished with melamine polished to a choice of colors. Frame: Mild Steel Powder coated of Guage 16 ( Dinning chairs)/ or equivalent / as Directed by Engineer Incharge.

Provide and supplying Classic Perfo CS Seat and Back : Metal Perforated Sheets Frame: Mild Steel Powder coated of Guage 16. 3 seater chairs ( 3 seater waiting chairs )/ or equivalent / as Directed by Engineer Incharge.

Provide and supplying Classic Perfo CS Seat and Back : Metal Perforated Sheets Frame: Mild Steel Powder coated of Guage 16. ( 2 seater chairs)/ or equivalent / as Directed by Engineer Incharge.

Inquiry Security Desk With Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-001 sectoin A Securuty Desk (SIZE: 2.1 X 0.6 X 1.05 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Inquiry Security Desk With Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-001 Elevation B Side Storage Full Height Storage (SIZE: 1.425 X 0.45 X 2.1 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Inquiry Security Desk With Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-001 Elevation C Side Storage Full Height Storage (SIZE: 1.425 X 0.45 X 2.1 m approx.)/ or equivalent / as Directed by Engineer Incharge.

OPD Ragistration Room-Workstation With Wall Low Height Storage & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-003 Elevation A Workstation 1200mm (SIZE: 1.23 X 0.45 X 1.05 m approx.)/ or equivalent / as Directed by Engineer Incharge.

OPD Ragistration Room-Workstation With Wall Low Height Storage & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-003 Elevation B Overhead Storage (SIZE: 3.525 X 0.45 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

OPD Ragistration Room-Workstation With Wall Low Height Storage & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-003 Elevation C Running Counter Storage (SIZE: 3.525 X 0.45 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

OPD Ragistration Room-Workstation With Wall Low Height Storage & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-003 Elevation D Magnetic Board (SIZE: 3.525 X 0.425 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Back Office Desk & Low Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-004 Elevation A Workstation (SIZE: 1.175 X 0.6 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Back Office Desk & Low Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-004 Elevation B Storage (SIZE: 6.525 X 0.45 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Back Office Desk & Low Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 0-004 Elevation C Storage (SIZE: 1.175 X 0.45 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Despensary Room-Workstation & Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick with 12 mm thick Thounghd Glass As per drawing 0-005 Elevation A Workstation (SIZE: 1.475 X 0.6 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Despensary Room-Workstation & Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick with 12 mm thick Thounghd Glass As per drawing 0-005 Elevation B Storage Low Height Storage & Overhead Storage 18mm Thick In Commericial Ply 2675mm Length/ or equivalent / as Directed by Engineer Incharge.

Despensary Room-Workstation & Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick with 12 mm thick Thounghd Glass As per drawing 0-005 Elevation C Storage Low Height Storage & Overhead Storage 18mm Thick In Commericial Ply 2150mm length approx./ or equivalent / as Directed by Engineer Incharge.

Despensary Room-Workstation & Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick with 12 mm thick Thounghd Glass As per drawing 0-005 Elevation D Magnetic Board 575Ht Length 2675mm approx./ or equivalent / as Directed by Engineer Incharge.

Despensary Room-Workstation & Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick with 12 mm thick Thounghd Glass As per drawing 0-005 Elevation E Magnetic Board 575Ht Length 2150mm/ or equivalent / as Directed by Engineer Incharge.

Store Dispensary Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With 12 mm thick Open Thounghd Glass Open Shelf With Drawer As per drawing 0-006 Elevation A Side Full Height Storage 18mm Thick In Commericial Ply 2100mm Height 6050mm length approx./ or equivalent / as Directed by Engineer Incharge.

Store Dispensary Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With 12 mm thick Open Thounghd Glass Open Shelf With Drawer As per drawing 0-006 Elevation B Side Full Height Storage 18mm Thick In Commericial Ply 2100mm Height 4400 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Store Dispensary Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With 12 mm thick Open Thounghd Glass Open Shelf With Drawer As per drawing 0-006 Elevation C Side Full Height Storage 18mm Thick In Commericial Ply 2100mm Height 1280 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With Open 12 mm thick Thounghd Glass Open Shelf With Drawer As per drawing 0-007 Elevation A Side Full Height Storage In Commercial Ply 2100mm Height 1275 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With Open 12 mm thick Thounghd Glass Open Shelf With Drawer As per drawing 0-007 Elevation B Side Full Height Storage In Commercial Ply 2100mm Height 3075 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With Open 12 mm thick Thounghd Glass Open Shelf With Drawer As per drawing 0-007 Elevation C Side Full Height Storage In Commercial Ply 2100mm Height 2250 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With 12mm thick Open Thounghd Glass Open Shelf With Drawer As per drawing 0-008 Elevation A Side Full Height Storage In Commercial Ply 2100mm Height 1750 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With 12mm thick Open Thounghd Glass Open Shelf With Drawer As per drawing 0-008 Elevation B Side Full Height Storage In Commercial Ply 2100mm Height 3020 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.(As per drawing) 0-008 Elevation C Side Full Height Storage In Commercial Ply 750mm Height 2275 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Chemist Store Room Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. All Product In 18mm Thick With 12mm thick Open Thounghd Glass Open Shelf With Drawer As per drawing 0-008 Elevation D . Desk Work Station In Commercial Ply (SIZE: 0.9 X 0.45 X 0.75 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Radiology Room- Woskstation & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-030 Elevation A Workstation 1200mm length / or equivalent / as Directed by Engineer Incharge.

Radiology Room- Woskstation & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-030 Elevation B Workstation 1850mm length/ or equivalent / as Directed by Engineer Incharge.

Radiology Room- Woskstation & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-030 Elevation C Overhead Storage ( size : 1.2 x 0.45 x 0.775 m approx.)/ or equivalent / as Directed by Engineer Incharge.

Typical X Ray Room- Workstation Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing (SIZE: 1.375 approx. X 0.6 X 0.75 M)/ or equivalent / as Directed by Engineer Incharge.

Back Office Desk Radiology Room - Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. With Overhead & Full Height Storage As per drawing 0-031 Elevation A Workstation 2200mm length / or equivalent / as Directed by Engineer Incharge.

Back Office Desk Radiology Room - Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-031 Elevation B Overhead Storage ( size : 1.8 x 0.45 x 0.775 m. approx.)/ or equivalent / as Directed by Engineer Incharge.

Back Office Desk Radiology Room - Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-031 Elevation C Full Height Storage 4200 mm legth approx. 2100mm height/ or equivalent / as Directed by Engineer Incharge.

Radiology Store Room- Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-032 Elevation A Side Full Height Storage 2900mm length/ or equivalent / as Directed by Engineer Incharge.

Radiology Store Room- Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-032 Elevation B Side Full Height Storage 1650mm length approx./ or equivalent / as Directed by Engineer Incharge.

Radiology Store Room- Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-032 Elevation C Side Full Height Storage 2900mm length approx./ or equivalent / as Directed by Engineer Incharge.

Sister Incharge Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-023 Elevation A - Storage With Glass Shelf & Drawer 3300mm length/ or equivalent / as Directed by Engineer Incharge.

Sister Incharge Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-023 Elevation B - Storage With Glass Shelf & Drawer 4150 mm length appro/ or equivalent / as Directed by Engineer Incharge.x.

Sister Incharge Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-023 Elevation C - Storage With Glass Shelf & Drawer 1425 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Granite Counter : Only Carpaintory Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-024/ or equivalent / as Directed by Engineer Incharge.

Sample Collection Room :Desk With Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-024/ or equivalent / as Directed by Engineer Incharge.

Nurce Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-049 Elevation A Desk Work Station 2000mm length approx/ or equivalent / as Directed by Engineer Incharge..

Nurce Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-049 Elevation A Counter Storage With Overhead Storage 2100mm length approx./ or equivalent / as Directed by Engineer Incharge.

DU Counter Low Height Storage Made Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-068,0-047 / or equivalent / as Directed by Engineer Incharge.

Report Writing Room-Back Office Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-041 Elevation A Workstation 1450mm length approx./ or equivalent / as Directed by Engineer Incharge.

Report Writing Room-Back Office Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-041 Elevation B Overhead Storage Height 750mm lenght approx./ or equivalent / as Directed by Engineer Incharge.

Radiologiast Room- Work Desk With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-042 Elevation A Desk Work Station (1.5 x 0.75 x 0.75 m )/ or equivalent / as Directed by Engineer Incharge.

Radiologiast Room- Work Desk With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-042 Elevation B Low Height Storage 3375mm length approx./ or equivalent / as Directed by Engineer Incharge.

Radiologiast Room- Work Desk With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-042 Elevation C Magnatic Board 3375mm length approx./ or equivalent / as Directed by Engineer Incharge.

Radiologiast Room- Work Desk With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-042 Elevation D Overhead Storge 3375 mm length approx./ or equivalent / as Directed by Engineer Incharge.

On Call Doctor Rest Room: Desk & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-045 Elevation A Desk Work Station 1800 mm length approx./ or equivalent / as Directed by Engineer Incharge.

On Call Doctor Rest Room: Desk & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-045 Elevation B Overhead Storage 1800 mm length approx./ or equivalent / as Directed by Engineer Incharge.

On Call Doctor Rest Room: Desk & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-045 Elevation C Magnatic Board 1500 mm length approx./ or equivalent / as Directed by Engineer Incharge.

TB Ward Room : Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing (1943 mm length approx.)/ or equivalent / as Directed by Engineer Incharge.

TB Ward Waiting Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-071 Elevation A Waiting Desk 2525mm length approx./ or equivalent / as Directed by Engineer Incharge.

TB Ward Waiting Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-071 Elevation B Back Side Storage 2525mm length approx./ or equivalent / as Directed by Engineer Incharge.

Medical Air Conditioned Store Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-077 Elevation A Desk Work Station 2650mm length approx./ or equivalent / as Directed by Engineer Incharge.

Medical Air Conditioned Store Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-077 Elevation B Overhead Storage ./ or equivalent / as Directed by Engineer Incharge.

Medical Air Conditioned Store Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-077 Elevation C Magnatic Board 2650 mm length approx./ or equivalent / as Directed by Engineer Incharge.

General Store Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-078 Elevation A Desk Work Station 1800 mm length approx./ or equivalent / as Directed by Engineer Incharge.

General Store Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-078 Elevation B Back Storage 1800 mm length/ or equivalent / as Directed by Engineer Incharge.

Medical Store Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-079 Elevation A Desk Work Station 1800 mm length/ or equivalent / as Directed by Engineer Incharge.

Medical Store Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-079 Elevation B Back Storage 1800 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Purchase Manager Desk : Cabin Table With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-082 Elevation A Desk Work Station 1500mm length approx./ or equivalent / as Directed by Engineer Incharge.

Purchase Manager Desk : Cabin Table With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-082 Elevation B Storage Low Height Storage & Overhead Storage 18mm Thick In Commericial Ply 3675 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Purchase Manager Desk : Cabin Table With Back Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-082 Elevation C Magnatic Board 3675 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Dieticians Office : Desk With Side Storage & Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing0-135 Elevation A Desk With Side Storage 1500 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Dieticians Office : Desk With Side Storage & Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing0-135 Elevation B Full Storage With Magnatic Board 1654 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Dieticians Office : Desk With Side Storage & Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing0-135 Elevation C Full Storage With Magnatic Board 3115 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Director Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing (2400mm length approx L- shape) 0-012-013-014-015-016-017-018-019-020-021(0-072,0-073,0-111 )/ or equivalent / as Directed by Engineer Incharge.

Unloading Area Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing (1800mm length approx )/ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-081 / or equivalent / as Directed by Engineer Incharge.

Back Office Workstation Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-081 Elevation A With Overhead Storage/ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-123 Elevation A Workstation 1240mm length approx./ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-123 Elevation B Storage 1200 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-123 Elevation C Magnatic Board 13000 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Report Writing Office Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-101 Elevation A Desk 1350mm length approx./ or equivalent / as Directed by Engineer Incharge.

Report Writing Office Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-101 Elevation B Overhead Storage 1350 mm length approx/ or equivalent / as Directed by Engineer Incharge.

Report Writing Office Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-101 Elevation C Full Height Storage/ or equivalent / as Directed by Engineer Incharge.

Report Writing Office Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-101 Elevation D Magnatic Board 5400 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Reception Desk Blood Bank Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-110 Elevation A MAIN TABLE/ or equivalent / as Directed by Engineer Incharge.

Reception Desk Blood Bank Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-110 Elevation B Side storage/ or equivalent / as Directed by Engineer Incharge.

Reception Desk Blood Bank Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-110 Elevation C Back Side Storage/ or equivalent / as Directed by Engineer Incharge.

Purchase Manager Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-133 Elevation A Desk 2500 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Purchase Manager Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-133 Elevation B Storage 2814 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Purchase Manager Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-133 Elevation C Magnatic Board 2814 mm length approx./ or equivalent / as Directed by Engineer Incharge.

HOD Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per drawing 0-120 Elevation A Desk 2500 mm length approx./ or equivalent / as Directed by Engineer Incharge.

HOD Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per drawing 0-120 Elevation B Storage 2375 mm length approx./ or equivalent / as Directed by Engineer Incharge.

HOD Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per drawing 0-120 Elevation C Magnatic Board 2375 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Pathologist Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.k As per drawing 0-100 Elevation A Desk 2500 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Pathologist Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-100 Elevation B Storage 2375 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Pathologist Desk With Back Full Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-100 Elevation C Magnatic Board 2375 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Treatment Room Counter Only Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing (3200mm length approx.) 0-12A,0-13A,0-14-A,0-15A,0-16A,0-17A,0-18A,0-19A,0-20A,021A,0-24A/ or equivalent / as Directed by Engineer Incharge.

Emergency ENT. Lobby Room Table With Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-054. 2600 mm length approx./ or equivalent / as Directed by Engineer Incharge.

Miner procedure room 1 With O.H.S Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-055 . Back Side Counter Low Height Storage With Overhead Storage/ or equivalent / as Directed by Engineer Incharge.

Miner procedure room 2 With O.H.S Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.As per drawing 0-056 Back Side Counter Low Height Storage With Overhead Storage/ or equivalent / as Directed by Engineer Incharge.

Public and staff Canteen: Coupon Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-139, 0-140 (1500x 650x 1050 mm )/ or equivalent / as Directed by Engineer Incharge.

Publc Canteen : Dining Table Top Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. Understructure In M.S Powder Coated As per drawing 0-140 Elevation A. Size 1800 X 800 X 750Ht./ or equivalent / as Directed by Engineer Incharge.

Publc Canteen : Dining Table Top Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. Understructure In M.S Powder Coated As per drawing 0-140 Elevation B. Size 1200 X 800 X 750Ht./ or equivalent / as Directed by Engineer Incharge.

Publc Canteen : Dining Table Top Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. Understructure In M.S Powder Coated As per drawing 0-139 Size 1200 X 800 X 750Ht./ or equivalent / as Directed by Engineer Incharge.

Running Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per drawing 0-139/ or equivalent / as Directed by Engineer Incharge.

Providing & fixing FULL HEIGHT BOTH SIDE LAMINATED PARTITION at required location having height more than 2.8 meter & minimum 77 mm thick made by using 50 x 50 mm (finished size) approved quality seasoned TW section framing at 600 mm center to center,covered with 12 mm marine ply generally confirming to I.S.303 / I.S.710-1980 on both sides.The partitions shall be finished with 1.5 mm thk.approved quality laminate matt/suede/fine line finished lamination pattern with grooves on both sides with necessary lipping (BTC) moulding. Antitermite treatment to plywood and woodwork,door, frame including all leads & lifts etc complete as per Architect's Drawing and instructions of Engineer In Charge. ( Basic Laminate Rate Rs.30/- per sft.) (Changing Room Male,Female,Class IV Male & Female,Security.)Changing Room Male,Female,Class IV Male & Female,Security etc.( Ground and First floor) as per Drawing 0-024 to 0-028 (1-088 to 1-093)/ or equivalent / as Directed by Engineer Incharge.

Waiting Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. With Side Storage Size Of 2100 X 600 X 750 Side Storage Size Will Be 1200 X 450 X 750Ht. One Pedestal Is Included (As Per Drawing) 1-00/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-014 Elevation A Size Of Storage (Length 2000 mm Approx., Height 1200mm)/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-014 Elevation B Size Of Storage (Length 1200 mm Approx., Height 1200mm)/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-014 Elevation C Size Of Storage (Length 800 mm Approx., Height 1200mm)/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-014 Elevation C Size Of Storage (Length 725 mm Approx., Height 1200mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per Drawing 1-103 Elevation A Side Storage Low Height Storage (Length 1325 mm Approx., Height 800mm) & Overhead Storage (Length 1475 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per Drawing 1-103 Elevation B Side Storage Low Height Storage (Length 3250 mm Approx., Height 800mm) & Overhead Storage (Length 3551 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per Drawing 1-103 Elevation C Side Storage Low Height Storage (Length 2650 mm Approx., Height 800mm) & Overhead Storage (Length 2951 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As Per Drawing 1-103 Elevation D Side Storage Low Height Storage (Length 1400 mm Approx., Height 800mm) & Overhead Storage (Length 1550 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.(As Per Drawing) 1-100 Elevation A Side Full Height Storage (Length 3700 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-100 Elevation B Side Full Height Storage (Length 1493 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-100 Elevation C Side Full Height Storage (Length 1750 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-101/1-098 Elevation A Back Side Counter With Storage Without Any Civil Work (Length 2100 mm Approx.,700mm Height)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-101/1-098 Elevation B Nurce Station Desk Pedestal & Keboard Tray is Include (Length 2100 mm Approx.,750mm Height)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-097 Elevation A Side Full Height Storage (Length 3700 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-097 Elevation B Side Full Height Storage (Length 2600 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-097 Elevation C Side Full Height Storage (Length 1750 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Counseling Room Table With Side Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-095-1-0a95/ or equivalent / as Directed by Engineer Incharge.

Anesthetist Desk & Side Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-083/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-066 Elevation A Side Storage Low Height Storage (Length 2337 mm Approx., Height 800mm) & Overhead Storage (Length 2337 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-066 Elevation B Side Storage Low Height Storage (Length 1500 mm Approx., Height 800mm) & Overhead Storage (Length 1650 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-066 Elevation C Side Storage Low Height Storage (Length 3663 mm Approx., Height 800mm) & Overhead Storage (Length 3814 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-065 Elevation A - Storage With Glass Shelf & Drawer (Length 2935 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-065 Elevation B - Storage With Glass Shelf & Drawer (Length 2804 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-065 Elevation C - Storage With Glass Shelf & Drawer (Length 985 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurce Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-063/ or equivalent / as Directed by Engineer Incharge.

Sister In Charge Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-061 Elevation A Front Desk With Pedestal (Length 1500 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Sister In Charge Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-061 Elevation B Back Side Storage (Length 1975 mm Approx., Height 750mm) With Magnatic Soft Board (Length 1975 mm Approx., Height 425mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-058 Elevation A - Storage Openable Shutter With Open Shelf (Length 1120 mm Approx., Height 2100mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-058 Elevation B - Storage Openable Shutter With Open Shelf (Length 2340 mm Approx., Height 2100mm)/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-058 Elevation C - Storage Openable Shutter With Open Shelf (Length 3270 mm Approx., Height 2100mm)/ or equivalent / as Directed by Engineer Incharge.

Doctor Rest Room- Table & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-056 Elevation A Table With Soft Board (Length 1500 mm Approx., Height 750mm) / or equivalent / as Directed by Engineer Incharge.

Doctor Rest Room- Table & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-056 Elevation B Overhead Storge (Length 1500 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Doctor Rest Room- Table & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-056 Elevation C Magnetic board (1500 x 450mm )/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-055 Elevation A Side Storage Low Height Storage (Length 2616 mm Approx., Height 800mm) & Overhead Storage (Length 2766 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-055 Elevation B Side Storage Low Height Storage (Length 890 mm Approx., Height 800mm) & Overhead Storage (Length 1040mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-055 Elevation C Side Storage Low Height Storage (Length 1275 mm Approx., Height 800mm) & Overhead Storage (Length 1576 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Panry Room Only Moduler Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-054 Elevation A Side Storage Low Height Storage(Length 2791 mm Approx., Height 800mm) & Overhead Storage (Length 2566 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Panry Room Only Moduler Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-054 Elevation B Side Storage Low Height Storage(Length 2476 mm Approx., Height 800mm) & Overhead Storage (Length 2626 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-050 Elevation A Nurse Station Desk & Counter Not Any Civil Work Include 18mm Thick In Commericial Ply With 1mm Thick Laminate Backer Laminate 0.8mm White Edgebandig All Hardwere All Product In 18mm Thick (As Per Drawing) 1-050 Elevation A Nurse Station Desk (Length 2700 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-050 Elevation B Back Side Counter (Length 2600 mm Approx., Height 800mm) with Overhead Storage (Length 2600 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-044,1-047 Elevation A Nurce Station Desk (Length 2100 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As Per Drawing) 1-044,1-047 Elevation B Back Side Counter (Length 2100 mm Approx., Height 800mm) with overhead Storage (Length 1600 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Sister In Charge Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 2100 mm Approx., Height 750mm) 1-043/ or equivalent / as Directed by Engineer Incharge.

DU Counter Low Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 2300 mm Approx., Height 800mm) 1-040,045,048/ or equivalent / as Directed by Engineer Incharge.

Wash Area Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-041,042 This item include Low Height Storage (Length 1800 mm Approx., Height 800 mm) & Overhead Storage (Length 1800 mm Approx., Height 700mm) / or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Providing, supplying and fixing the Storages made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with white Edge banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-038 Elevation A Side Storage Low Height Storage (Length 2276 mm Approx., Height 800mm) & Overhead Storage (Length 2426mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Clean Utility Room Providing, supplying and fixing the Storages made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with white Edge banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-038 Elevation B Side Storage Low Height Storage (Length 2176 mm Approx., Height 800mm) & Overhead Storage (Length 2176 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Nurce Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-037 Elevation A Desk Work Station (Length 2100 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurce Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-037 Elevation B Back Side Counter Low Height Storage (Length 3788 mm Approx., Height 750mm) With Overhead Storage (Length 1363mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

DU Counter Low Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 2500 mm Approx., Height 800mm) 1-033,040/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-031 Elevation A Desk Work Station (Length 1500mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-031 Elevation B Back Side Counter Low Height Storage (Length 1800 mm Approx., Height 800mm) With Overhead Storage (Length 1288 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-030 Elevation A Desk Work Station (Length 1500 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-030 Elevation B Back Side Counter Low Height Storage (Length 2188 mm Approx., Height 800mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-023,024 Elevation A Desk Work Station (Length 1500 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-023,024 Elevation B Back Side Counter Low Height Storage (Length 1500 mm Approx., Height 800mm) With Overhead Storage (Length 1500 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-019 Elevation A Desk Work Station (Length 2100 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-019 Elevation B Back Side Counter Low Height Storage (Length 3946 mm Approx., Height 800mm) With Overhead Storage (Length 1683 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

DU Counter Low Height Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.k (Without Civil Work) (Length 3600 mm Approx., Height 800mm) As Per Drawing 1-017/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.e (As per drawing) 1-016 Elevation A Desk Work Station (Length 2100 mm Approx., Height 750mm)/ or equivalent / as Directed by Engineer Incharge.

Nurse Station Desk Work Station Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.e (As per drawing) 1-016 Elevation B Back Side Counter Low Height Storage (Length 1500 mm Approx., Height 800mm) With Overhead Storage (Length 1500 mm Approx., Height 700mm)/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-014 Elevation A Side Full Height Storage (Length 3970 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-014 Elevation B Side Full Height Storage (Length 1600 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Storage & Administration Room Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-014 Elevation C Side Full Height Storage (Length 1600 mm Approx.,2100mm Height)/ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation With O.H.S Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost.(As per drawing) 1-013 Elevation A Workstation (Length 1200 mm Approx.,750mm Height)/ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation With O.H.S Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-013 Elevation B Overhead Storage (Length 1200 mm Approx.,775mm Height)/ or equivalent / as Directed by Engineer Incharge.

Back Office Workstation With O.H.S Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-013 Elevation C Magnatic Board (Length 1200 mm 450mm Height approx.)/ or equivalent / as Directed by Engineer Incharge.

Panry Room Only Moduler Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. Low Height Storage (Length 2050mm Approx.,800mm Height) With Overhead Storage (Length 2050 mm Approx.,700mm Height) (As per drawing)/ or equivalent / as Directed by Engineer Incharge.

Doctor Rest Room- Table & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-009 Elevation A Table With Soft Board (Length 1800 mm Approx.,750mm Height) / or equivalent / as Directed by Engineer Incharge.

Doctor Rest Room- Table & Overhead Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-009 Elevation B Overhead Storge (Length 1800 mm Approx.,775mm Height) / or equivalent / as Directed by Engineer Incharge.

M.S Cabin Room- Cabin Table Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 3300 mm Approx.,750mm Height) (As per drawing) 1-008/ or equivalent / as Directed by Engineer Incharge.

Conference table Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 3000 mm Approx.,Width 1500mm,750mm Height) (As per drawing) 1-007/ or equivalent / as Directed by Engineer Incharge.

(Cabin Desk) Cabin Table With Side Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-004-5-6 Elevation A/ or equivalent / as Directed by Engineer Incharge.

(Cabin Desk) Cabin Table With Side Storage Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-004-5-6 Elevation B As Per Elevation D Full Storage Set With Magenatic Baoard (Length 2854 mm Approx.,2100mm Height) (As per drawing)/ or equivalent / as Directed by Engineer Incharge.

Pantry Room Storge Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 3400 mm Approx.,800mm Height) with overhead storage (Length 3400 mm Approx.,700mm Height) (As per drawing) 1-002/ or equivalent / as Directed by Engineer Incharge.

Information Desk Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (Length 1800 mm Approx.,750mm Height) (As per drawing) 1-001-015/ or equivalent / as Directed by Engineer Incharge.

Sister Rest Room Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-057 size of storage (1.8 x 0.4 x 2.1 M) approx./ or equivalent / as Directed by Engineer Incharge.

Sister Rest Room Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-057 size of storage (1.8 x 0.6 x 2.1 M) approx./ or equivalent / as Directed by Engineer Incharge.

OT & ICU Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-059 size of storage ( 4.7 x 0.6 x 2.1 M) qty approx/ or equivalent / as Directed by Engineer Incharge.

OT & ICU Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. (As per drawing) 1-059 size of storage ( 3.17 x 0.6 x 2.1 M) qty approx/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per Drawing 1-102 Elevation A Size Of Storage 1525 qty approx X 400 X 1200 MM/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per Drawing 1-102 Elevation B Size Of Storage 3275 qty approx X 400 X 1200 MM/ or equivalent / as Directed by Engineer Incharge.

Store Room Only Storages Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. As per Drawing 1-102 Elevation C Size Of Storage 2050 qty approx X 400 X 1200 MM/ or equivalent / as Directed by Engineer Incharge.

Post OP Nurse Sation Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. AS Post OP Nurse Sation Desk Pedestal & Keboard Tray is Include/ or equivalent / as Directed by Engineer Incharge.

Post OP Nurse Sation Desk & Counter Providing, supplying and fixing the furniture made from plywood and laminate. including 18mm Thick Commericial Ply as specified in make list. including 1mm Thick Laminate on all visible side, White laminate of 0.8 mm thickness from inside with banding on all edges. All necessary hardware/ fixitures as per make list, finishing, cleaning etc. No civil work included in this cost. AS Back side storage/ or equivalent / as Directed by Engineer Incharge.

providing and fixing 12 mm Thk clear toughened glass as per design and drawing as directed by site engineer

providing and fixing 3 M FILM for 12 mm Thk clear toughened glass as per design and drawing as directed by site engineer

Kunal Structure India Pvt Ltd