REPAIR OF STEEL FURNITURE AT FURNITURE YARD OF GE JAIPUR

Amount

Description for item Sr No. 1.01 to 1.07 : Removing of existing unserviceable ply wood and S&F new plywood BWR Phenol bounded commercial plywood with the help of nut bolts including suitable washer as per drawing and directed.

Bed Hard Steel. FD/E6/MAP/08

Charpoy IP hardtop. FD/MAP-II/01

Charpoy IP folding with hard top. FD-388 (R)

Replacement of unserviceable pre laminated particle board from the head and foot rest assy of bed hard. FD/E6/MAP/08

S&F PVC/Rubber shoe of bed hard steel as per drg. FD/E6/MAP/08

S&F PVC/Rubber shoe of Charpoy IP hard top as per drg. FD/MAP-II/01

S&F PVC/Rubber shoe of charpoy IP folding as per drg. FD-388 (R)

S&F MS conduct pipe stiffeners of charpoy IP and bed hard made out of 25mm square MS pipe of 18 gauge wall thickness with welding and painting neatly with two coat of synthetic enamel paint black to match with existing as shown on drawing and directed. FD/MAP-II/01, FD/E6/MAP/08

M&L welding where required and filling properly at places of welding point throughout in broken joints of frame including painting of replaced part of steel portion to match with existing as directed. one broken point shall be measured as one point i.e. one unit. Bed hard steel, Charpoy IP hardtop and charpoy IP folding with hard top. FD/MAP-II/01, FD/E6/MAP/08, FD-388 (R)

Repairing as per description of Sr No 4.01 to 4.06 for Almirah Large and Medium Steel : FD-1031,1032

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for almirah large steel/almirah medium steel. FD-1031,1032

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of almirah large / medium steel all as directed. FD-1031,1032.

Taking out old unserviceable leg of almirah large/medium steel and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed. FD-1031,1032

Removing of existing unserviceable lock from almirah medium/large steel and supply and fix new brass lock 6 lever with duplicate key complete. FD-1031,1032

Removing existing locking device with MS plate, rod and S&F new locking device with plate, rod complete in almirah large steel as directed. FD-1031

All as per Item No 4.05. above but in almirah medium steel. FD-1032

Painting as per description (for item No 5.01 to 5.17) :- M&L preparation old painted steel surfaces i.e filliing all holes/cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty then by cleaning and applying one coat of synthetic enamel paint olive green/black/ white/grey (as directed) with spray gun or by manual brush and roller as per requirement in appropriate shade complete including S&F hard rubber shoe where ever required all as specified and directed by engineer in charge.

Almirah large steel with shelves both side (out side and in side) FD-67,FD-1031

Almirah large steel with shelves out side only. FD-67,FD-1031

Almirah medium steel with shelves both side (out side and inside). FD-67,FD-350,FD-1032

Almirah medium steel with shelves out side only. FD-67,FD-350,FD-1032

Chair CB steel without arms. FD-75M

Chair CB steel with arms. FD-75M

Form with back (steel frame only) FD-78M.

Form without back (steel frame only). FD-78M

Table office officer steel complete (outside and inside). FD-84,FD-1003

Table office clerk steel (outside and inside). FD-84,FD-1004

Table dining OR.FD-165M

Table 3’x2’ steel with drawer and without drawer. FD-1008

Teapoy verandah white colour. FD-255

Chair writing steel with arms. FD-360

Table 900mm x 900mm x 860mm (steel). FD-1009

Locker Steel. FD-1029

Book case steel. FD-1028

Replacement as per description of tops (6.01 to 6.07): Taking out unserviceable top and S&F new top made out of 18mm thick particle/MDF board with one side laminated sheet including plain/half round 4mm thick teak wood edging around the top duly polished with the help of necessary screw/ nut bolts all as specified in drg and directed by engineer in charge

Table dining OR . FD-165

Table office officer steel. FD-1003

Table office clk steel. FD-1004

Table typist steel. FD-1006

Table top of size 3’x2’ with or without drawer. FD-1007, FD-1008

Teapoy verandah. FD-255

Table 900mm x 900mm steel. FD-1009

Repairs to Tables (7.01 to 7.07) :

Taking out old unserviceable lock of drawers of table officer office/ clerk/ typist steel and S&F brass lock with four levers locks with duplicate keys. FD-1004, 1003, FD-1006

Taking out existing drawers of table office clerk /typist/ officers/table 3x2 steel and re-fixing same after necessary setting of drawers for free movement all as directed. FD-1004, 1003, FD-1006, 1008

Taking out old unserviceable drawers of table office clerk/ typist/ officers steel and S&F new drawers made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed. FD-1004, 1003, FD-1006

Taking out old unserviceable existing centre stiffeners/long rail of table dining OR and supplying and fixing new one made out of 25mm square MS pipe of 1.6mm wall thickness as shown on drawing and directed. FD-165

M&L welding throughout in broken joints of frame of table dining OR, teapoy verandah,table 3’x2’, 3’x3’, office officer, office clk, typist etc. Welding at one broken point will be counted as one point. FD-165,255, 1003, 1004, 1006 to 1009

Taking out old unserviceable seat plank of form with back and S&F new plank of 2nd class hard wood in one piece duly wrought upper side including edges and cleaning the other face bottom fix with MS nut and washer as shown on drawing & directed size of Plank shall be 1800mm x 255mm x 25mm. FD-77,97,78M

All as per Item No 8.00 above but form without back and size of Plank shall be 1525mm x 255mm x 25mm. FD-77,97,78M

Repair description of Steel chairs (10.01 to 10.18):

Replacing broken PVC shoe of chair CB steel with and w/o arm as per drg and directed. FD-75M

Replacing rubber/PVC plugs of chair CB steel with and w/o arm as per drg and directed. FD-75M

S&F MS flat iron 440x18x3mm in chair writing steel under seat , front and back (set of two) with welding and painting neatly in colour paint black complete all as directed. FD/E6/ MAP/12

Taking out unserviceable seat of Chair writing Steel and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. FD/E6/MAP/12

Taking out unserviceable back of Chair writing Steel and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shadewith black pvc beeding including necessary nut bolts and washer. FD/E6/ MAP/12

Taking out unserviceable PU handle of Chair writing Steel and S&F new PU handle with screw/ Nut/bolts as per drg. FD/E6/ MAP/12

Taking out unserviceable seat of Chair computer and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. FD/E6/ MAP/01

Taking out unserviceable back of Chair computer and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. FD/E6/ MAP/01

Removing of unserviceable castor from the chair computer revolving and S&F new castors as per drg and directed. FD/E6/ MAP/01

Removing of unserviceable PVC Base (5 legs) from the chair computer revolving and S&F new PVC base as per drg and directed. FD/E6/ MAP/01

Removing of unserviceable hydraulic assy from the chair computer and S&F new hydraulic assy with pvc couplings as per drg and directed. FD/E6/ MAP/01

Taking out unserviceable PU handle of Chair computer and S&F new handle with suitable screw/ Nut/bolts as per drg. FD/E6/ MAP/01

Removing of unserviceable cloth rexene and foam cushion cloth of chair easy frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed. Size of seat frame shall be 560mm x 535mm x 50mm. FD-121M

All as per Item No 10.13 above but back frame of chair easy steel of size 560mm x 355mm x 25mm (thickness of foam cushion 50mm & 40mm density). FD-121M

Taking out unserviceable writing board and S&F new prelaminated MDF board teak face of size 210x 465mm duly edged with teak wood beeding with screws as per drg. Chair CBA with hand rest. FD-260

Taking out unserviceable plastic seat and S&F new polypropylene co-polymer seat, weight not less than1.20 kg per seat to be fixed with screw/ Nut/bolts as per drg. Chair CBA with hand rest. FD-260

Chair school with hand rest:- Replacement of writing top made of 18mm thick pre-laminated MDF board of approved colour ISI marked 585mm x 500mm and fixing it to handle of chair by means of hinges 75mm all as per drg and as directed. FD/E6/MAP/05

M&L welding where required and filling properly at places of welding point throughout in broken joints of frame including painting of replaced part of steel portion to match with existing as directed. one broken point shall be measured as one point i.e. one unit. Chair writing,CBA with hand rest,school with hand rest and table bed side. FD/E6/MAP/12, FD-260, FD/E6/MAP/05, FD/E6/MAP/15

TV trolly (11.01 to 11.03) FD/E6/MAP/04 :-

Replacement of 5.5mm thick plain glass openable glass shutters with magnetic catcher and stainless steel patch fitting for glass EBCO type all as per drg as directed.

Replacement of top of TV trolly with 18mm thick pre-laminated particle/MDF board ISI marked of approved shade with 50 x 50mm moulded teak wood beading on 3 sides to shape to be provided all as per drg and as directed.

Replacement of swivel type nylon castors all as per drg and as directed.

Table bed side (12.01 to 12.07) FD/E6/MAP/15 :- Replacement of following unserviceable parts made of 18mm pre-laminated particle board ISI marked all as per drg and directed by engineer in charge.

Top of table bed side of size 440mm x 460mm alongwith 6mm PVC edging

Side/bottom pane of table bed side of size 440mm x 400mm

Back of table bed side of size 460mm x 40mm made of ply 6mm BWR grade

S&F front steel support/ leg of table bed side duly painted black in colour with the help of screws / washers as per drg and directed.

S&F rear steel legs including back of table bed side duly painted black in colour with the help of screws / washers as per drg and directed.

Tightening of steel support as well as particle board panes to make it serviceable

S&F PVC/Rubber shoe of table bed side

Locker Steel : (13.01 to 13.05) FD-1029

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for locker steel.

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of locker steel all as directed.

Taking out old unserviceable leg of locker steel and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed.

Removing of existing unserviceable haps and staple and S&F new set complete.

S&F 20mm chromium plated steel conduct pipe along with suitable bracket

Book Case Steel : (14.01 to 14.05) FD-1028

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for book case steel.

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clits, clips and washer etc all as directed.

Taking out old unserviceable glass and S&F new plain glass 3mm including fixing of glass supporing MS plate with screw/nut bolts. The shape and sizes as per drawing and directed.

Removing of existing unserviceable locks and S&F new lock set (04 Nos of lock with two keys only) as per drawing and directed.

M&L welding where required and filling properly at places of welding point throughout in broken frame of Locker steel and book case steel. One broken point shall be measured as one point ie one unit. FD-1028, 1029

Chair Dining long back (15.01 to 15.06) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD/E6/MAP/10

Front/Rear legs

Rear leg

Long back of vertical strips 30mm x 15mm all as per drg.

Front/back/side rail

Stiffeners

Replacement of nylon buffers.

Cushion of 40 density duly tapestry covered of approved quality, cost not less than 250/mtr all as specified in drg

Schedule of Credit

L.BHIMSEN

SK INDUSTRIES

S S Infrazone

B.S Constructions

F.M. KHAN SONS

AJAY TRADERS