SPECIAL REPAIR/REPLACEMENT OF CERTAIN E/M HEATING / COOLING EQUIPMENTS AND OTHER CONNECTED ITEMS AGAINST BER UNDER AOR OF GE 864 EWS AT BB CANTT, SRINAGAR

Supply, fixing, installation, commissioning and testing of hi wall mounted based invertor type three star rated split AC unit of rated capacity 1.5 TR invertor based hot and cold type indoor and out door unit complete set with having both cooling and heating function and digital display inverter type complete with cordless remote control and full filling of initial refrigerant gas along with having in built heating and cooling arrangement and along with invertor rotary type compressor unit and suitable for operation for 230 Volt 50Hz single phase electric supply including providing of MS stand & bracket for fixing of outdoor unit and indoor unit system and also providing of both type/size of suction and discharge copper refrigerant piping attachment system and duly fixed both piping connected for outdoor unit to indoor unit system along with duly over lapped it by nitrile insulation, with insulation taping work and also providing of suitable size of additional drain pipe line system up to ground level for dropping out the condensing water outside area from evaporator unit attachement system and making electric connection with 3 core copper cable of suitable size and including making of hole on existing type wall/roof/ceiling etc for jointing of inter connection of indoor and outdoor system and after making good to all disturbed surface match to existing wall, complete all as specified and directed.

Supply, fixing,installation,commissioning and testing of wall mounting hanging based automatic operation based digital type automatic voltage stabilizer unit of rated capacity 5 KVA complete and suitable using for single phase naturally air cooled indoor type with having digital display and suitable for operation on single phase AC supply and with having designed voltage for input & output voltage 90 Volt to 250 Volt with accuracy + 2.5% and with having low voltage cut off 90 (-) 5 volts and high voltage cut off 250 (+) 5 volts and along with start time delay system with time delay adjustable upto 30 second to 1.5 minutes system unit, complete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with single pole and neutral enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SPN 32 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection complete all as specified and directed.

Supply and fixing of sub main wiring system with PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size single core 2 run of 4 Sqmm and 1 run of 4 Sqmm FRLS wire (Nominal area) and drawn through in heavy duty PVC casing capping/ PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall all as per decision and direction by EIC including and making electrical connection of complete system all as specified and directed. Note:- 3 runs of 4 sqmm wire and one run of PVC caseing/ capping/ conduit shall be measured as 1.00 running meter .

Supply and fixing of distribution board box SPN 6 way type 220 volt AC supply system and made out of sheet metal enclosure with duly powder coated & framing work with locking system and having double door type arrangement system and with having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical complete all as specified and directed.

S&F MCB SPN 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed.

S&F MCB SP 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed.

Supply, fixing & jointing of AC copper tubing/piping line and suitable using it for both refrigerant gas line attachment for suction/discharge piping system complete along with providing of insulating material over the both refrigerant gas pipe line attachment system and including fixing supports/ saddles etc as required at site, complete all as specified and directed.

Supply and fixing of sub main wiring system with PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size single core 2 run of 10 Sqmm and 1 run of 10 Sqmm FRLS wire (Nominal area) and drawn through in heavy duty PVC casing capping/ PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall all as per decision and direction by EIC including and making electrical connection of complete system, complete all as specified and directed. Note:- 3 runs of 10 sqmm wire and one run of PVC caseing/ capping/ conduit shall be measured as 1.00 running meter .

Supply, fixing, installation, commissioning and testing of 02 body Mortuary cabinet complete unit with ISI mark of standard size and type complete system. The Mortuary cabinet & chamber complete body system inside and outside with all exterior & interior area made out of minimum 1.0 mm thick stainless steel material (SS-304 grade) based framing work along with providing of moving tray made out of stainless steel material (SS-304 grade) with all are corrosion free metal components with advance polyurethane insulation minimum 50 mm thick to ensuring maximum efficiency and durability type and also safety door lock prevents opening with high quality door seal and concave body tray with armrest for easy to operate sliding system and also designing /planning of cabinet structure shape of two body as a vertically staged type system and also providing of heavy duty with low noise type of two nos of compressor unit and highly efficiency based two nos of condenser unit and evaporator complete for twin cooling system or double backup based cooling along with it controlling system as a one working and other one as a stand by system along with providing and maintained the complete Mortuary cabinet refrigeration temperature of system range of -10 to 4ºC complete and providing and making of strong and reliable power full quick response refrigeration gas pipe line as a ring main attachment system for both cooling chamber . Both cooling chamber should be dully inter connected to each other system and also providing of in built power panel microprocessor controller based with LCD display/digital display to show accurate parameters like temperature , alarm function with audio visual alarm system in case of any fault found in the system like high temp, low temperature, defrost compressor, condenser on/off ,volt Amp etc for each system and this system is suitable operating for single phase, 230 Volt, 50 Hz power supply system along with providing of OEM recommended suitable capacity of 02 Nos of automatic operation based digital type air cooled indoor type automatic voltage stabilizer unit complete one working and one stand by with having operation on single phase AC supply and with having designed input voltage 90 Volt & output voltage 250 Volt with accuracy + 2.5% and with having low voltage cut off 90 (-) 5 volts and high voltage cut off 250 V (+ 5) Volts along with start time delay system with time delay adjustable upto 30 second to 1.5 minutes unit complete all as decided specified and directed by EIC. and including making electrical connection of complete system all as specified and directed Note:- (a) If any miscellaneous work , minor specification of items and other minor items qty which are/is not mentioned / covered under this item/schedule but required for the Mortuary cabinet chamber machine for better safety and improvement of system purposed it shall be provided by the contractor as per manufacture specifications /recommendations and the cost of the same shall be deemed to include in the quoted rates. (b) Before installation of above equipment/plants machine unit the contractor to be produce the OEM test and specification certificate and purchase voucher etc and to be submit to GE / Engineer In Charge for their further direction and necessary action. (c) The rate quoted by the contractor on tender for the work deemed to be included for base frame foundation work along with, unloading/shifting/addition alteration of existing cabinet and installation of new Mortuary cabinet chamber and its other related equipment’s as per specified by OEM. recommendation or all as decided and directed by EIC.