Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC SHAKTI NAGAR UDHAMPUR TEH DISTT UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹11.8 L+₹3.8 L (47.8%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹13.0 L+₹5.0 L (62.5%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
| Sl No | Description | Qty | Unit | VEE KAY IND L1 | shivom builders L3 | RAJ MOHD L2 |
|---|---|---|---|---|---|---|
| 1.00STEEL FURNITURE : Taking down worned out components of the following steel furniture and S&F new component as per shape and size specified on respective drawings complete all as specified and directed by Engineer-in-charge. | ||||||
| 2.00ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) complete all as specified and directed by Engineer-in-charge. . | ||||||
| 2.01 | Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coat of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. | 32 | Each | 100 ₹3,200 Lowest | 420 ₹13,440 | 500 ₹16,000 |
| 2.02 | Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. | 21 | Each | 100 ₹2,100 Lowest | 430 ₹9,030 | 400 ₹8,400 |
| 2.03 | side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. | 14 | Each | 100 ₹1,400 Lowest | 390 ₹5,460 | 300 ₹4,200 |
| 2.04 | Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. | 21 | Each | 100 ₹2,100 Lowest | 310 ₹6,510 | 200 ₹4,200 |
| 2.05 | Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. | 42 | Each | 100 ₹4,200 Lowest | 190 ₹7,980 | 200 ₹8,400 |
| 2.06 | Six Levers brass lock complete all as specified and directed by Engineer-in-charge. Make : Godrej/Harrison/Link with duplicate keys | 32 | Each | 150 ₹4,800 Lowest | 310 ₹9,920 | 400 ₹12,800 |
| 2.07 | Three way Locking Device of 10 mm dia MS rod with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces. | 32 | Each | 50 ₹1,600 Lowest | 150 ₹4,800 | 300 ₹9,600 |
| 2.08 | Chromium plated Steel Handle 125mm complete all as specified and directed by Engineer-in-charge. | 42 | Each | 100 ₹4,200 | 40 ₹1,680 Lowest | 80 ₹3,360 |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
24 Jul 2025, 6:00 pmClosed
GE AF UDHAMPUR
GE (AF) STN UDHAMPUR
REPAIR / MAINTENANCE TO STEEL FURNITURE INCLUDING PAINTING AND OTHER CONNECTED WORKS AT AF STATION NATHATOP UNDER GE (AF) UDHAMPUR
2025_MES_717000_1
GEAFU-19/2024-25
Open Tender
Civil Works
Works
270 days
GE (AF) STATION UDHAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (AF) UDHAMPUR
₹30,000
20 Aug 2025
26 Jun 2025
26 Jul 2025
26 Jun 2025
24 Jul 2025
10 Jul 2025
26 Jun 2025 - 3 Jul 2025
Amount
STEEL FURNITURE : Taking down worned out components of the following steel furniture and S&F new component as per shape and size specified on respective drawings complete all as specified and directed by Engineer-in-charge.
ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) complete all as specified and directed by Engineer-in-charge. .
Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coat of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge.
Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge.
side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge.
Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge.
Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge.
Six Levers brass lock complete all as specified and directed by Engineer-in-charge. Make : Godrej/Harrison/Link with duplicate keys
Three way Locking Device of 10 mm dia MS rod with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.
Chromium plated Steel Handle 125mm complete all as specified and directed by Engineer-in-charge.
Chromium plated MS Key plate fixed with screw and nuts complete all as specified and directed by Engineer-in-charge. .
Leg made of 1.6 mm thick MS sheet with Gas welding incl two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Almirah Small/ Medium steel (FD-350 /1032/243)
Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. .
side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. .
Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. .
Six Levers brass lock complete all as specified and directed by Engineer-in-charge. Make : Godrej/Harrison/Link with duplicate keys.
Three way Locking Device of 10 mm dia MS rod with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Chromium plated Steel Handle 125mm complete all as specified and directed by Engineer-in-charge. .
Chromium plated MS Key plate fixed with screw and nuts complete all as specified and directed by Engineer-in-charge. .
Leg made of 1.6 mm thick MS sheet with Gas welding incl two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Locker Bedside Steel ( FD-1029) complete all as specified and directed by Engineer-in-charge. .
Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint overa coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. .
side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. .
Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side complete all as specified and directed by Engineer-in-charge. .
Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
Chromium plated 125mm Steel Handle 'D' type for Locker Bedside steel complete all as specified and directed by Engineer-in-charge. .
Leg made of 1.6 mm thick MS sheet with Gas welding incl two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed by Engineer-in-charge. .
75mm Chromium plated hasp & stapple fixed with rivets of locker steel complete all as specified and directed by Engineer-in-charge. ..
Hanging Rod of 1.6mm thick chromium plated MS Rod complete all as specified and directed by Engineer-in-charge. ..
Chair Visitor of all models (TP) complete all as specified and directed by Engineer-in-charge. .
Repair to chair visitor with cushion of all models, including repair/replacement of seat, and back, welding of broken joints of frame of chair visitor to make the chair serviceable complete all as specified and directed by Engineer-in-charge. .
Chair Revolving high back (TP) complete all as specified and directed by Engineer-in-charge. .
Replacement of complete seat with new moulded foam cushioned 40mm thick of requirment density as shape and size and fixed over 12mm thick hot pressed plywood, covered with synthetic leatherate as approved and as directed by Engineer-in-charge
All as per item No 6.01 here-in-before but for back frame complete all as specified and directed by Engineer-in-charge. .
Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front complete all as specified and directed by Engineer-in-charge. .
Pedestal assembly complete all as specified and directed by Engineer-in-charge. .
Twin wheel coasters press fitted at the bottom of leg complete all as specified and directed by Engineer-in-charge. .
Hydraulic system complete all as specified and directed by Engineer-in-charge. .
CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) complete all as specified and directed by Engineer-in-charge. .
Seat frame of Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality as shown in drawing complete all as specified and directed by Engineer-in-charge.
All as per item No 7.01 here-in-before but back frame complete all as specified and directed by Engineer-in-charge. .
All as per item No 7.01 here-in-before but Seat frame for Chair CB Steel without Arms complete all as specified and directed by Engineer-in-charge. .
All as per item No 7.01 here-in-before but back frame for Chair CB Steel without Arms complete all as specified and directed by Engineer-in-charge. .
Arms rest for Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish complete all as specified and directed by Engineer-in-charge. .
PVC cap at top of the frame of the chair (02 Nos to each chair) complete all as specified and directed by Engineer-in-charge. .
PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair) complete all as specified and directed by Engineer-in-charge. .
Chair Verandah (FD-250) complete all as specified and directed by Engineer-in-charge. .
Taking out old U/S cane and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge
Provn of Gas welding to the broken joints/parts upto 4-6 joints including provision of MS conduit pipe 15 mm dia (upto the length of approx 2 feet long) where required to complete the parts of frame of chair verandah including its smoothening for repainting/recanning all as per complete all as specified and directed by Engineer-in-charge.
PVC/Rubber shoes as per sample approved complete all as specified and directed by Engineer-in-charge. .
Charpoy GI Pipe with plywood top: (FD-220) complete all as specified and directed by Engineer-in-charge. .
3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams complete all as specified and directed by Engineer-in-charge.
Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams complete all as specified and directed by Engineer-in-charge.
Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends complete all as specified and directed by Engineer-in-charge.
Short rail converted out of retrieved Long rail, Item No 8.03 above incl cutting, threading as required and complete all as specified and directed by Engineer-in-charge.
Leg converted out of retrieved Short rail, Item No 8.04 above incl cutting, threading as required and complete all as specified and directed by Engineer-in-charge.
Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail complete all as specified and directed by Engineer-in-charge.
Taking out old existing unserviceable plywood top from charpoy GI pipe and supply and fixing of new top made out of plywood commercial of size 6.5ftx3ftx12mm thickcomplete all as specified and directed by Engineer-in-charge.. Make : Kitply/Greenply.
Replacement of existing rusted/corrosion flat iron strip with new flat iron strip of size 50mmx50mmx 5mm with appropriate size headless bolt and nut on frame of charpoy GI pipe complete all as specified and directed by Engineer-in-charge.
TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006) complete all as specified and directed by Engineer-in-charge. .
Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top complete all as specified and directed by Engineer-in-charge.
Drawer made of 22 gauge MS sheet with a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
Six levers Lock of Godrej/Harrison with duplicate keys complete all as specified and directed by Engineer-in-charge.
PVC Shoe at bottom of the leg of the Table complete all as specified and directed by Engineer-in-charge.
TABLE 3' x 3' STEEL (FD-291/1009) complete all as specified and directed by Engineer-in-charge. .
Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top complete all as specified and directed by Engineer-in-charge.
PVC Shoe at bottom of the leg of the Table complete all as specified and directed by Engineer-in-charge.
TABLE 3' x 2' STEEL WITH DRAWER ( FD-283/1008)/Table for Hav & OR Steel (FD-223/1007) complete all as specified and directed by Engineer-in-charge. .
Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top complete all as specified and directed by Engineer-in-charge.
Drawer made of 22 gauge MS sheet with a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
PVC Shoe at bottom of the leg of the Table complete all as specified and directed by Engineer-in-charge.
CHARPOY IP WITH PLYTOP (FD/MAP-II/01) complete all as specified and directed by Engineer-in-charge. .
12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) to be fixed to frame with MS nuts & screws complete all as specified and directed by Engineer-in-charge.
PVC Shoe at bottom of the leg of the Charpoy complete all as specified and directed by Engineer-in-charge.
Painting of steel furniture:- Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt and rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to the following steel furniture items and applying two coats of synthetic enamelled paint by using spray machine both internally and externally complete all as specified and directed by Engineer-in-charge.
Almirah Steel Large with Shelves, FD-351/1031 complete all as specified and directed by Engineer-in-charge.
Almirah Small/medium steel (FD-350 /1032/243) complete all as specified and directed by Engineer-in-charge.
Locker Bedside Steel ( FD-257/1029) complete all as specified and directed by Engineer-in-charge.
Table office clerk steel (FD-1007) complete all as specified and directed by Engineer-in-charge.
Table (900x600x760)mm steel with drawer (FD-283/1008 complete all as specified and directed by Engineer-in-charge.
Table 3'x3' steel (FD-291/1009) complete all as specified and directed by Engineer-in-charge.
Table office officer steel complete all as specified and directed by Engineer-in-charge.
Rack side steel complete all as specified and directed by Engineer-in-charge.
Book shelf open large steel (Rack 6 tier) complete all as specified and directed by Engineer-in-charge.
Book shelf open large steel (Rack 3 tier) complete all as specified and directed by Engineer-in-charge.
Book shelf open small steel complete all as specified and directed by Engineer-in-charge.
Book Case L/Pattern complete all as specified and directed by Engineer-in-charge.
MS rack 5 1/2'x2 1/2'x2' with shelves complete all as specified and directed by Engineer-in-charge.
MS rack 16x2 1/2'x2' with shelves complete all as specified and directed by Engineer-in-charge.
CHARPOY IP WITH PLYTOP (FD/MAP-II/01) complete all as specified and directed by Engineer-in-charge.
RAJ MOHD (BID ID -3370368)
shivom builders (BID ID -3362219)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .