COMPREHENSIVE MAINTENANCE OF WATER SUPPLY INSTALLATION UNDER GE(U) BATHINDA.

Amount

Demolition of cement concrete (un-reinforced) in floors / pavings n exc. 15cm thickness, (below or above ground level) complete all as specified and directed.

M&L for 25 mm thick Cement concrete (1:2:4) type B-0 ( using 12.5mm graded srushed stone aggregate) as in floor to recieve top level complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in Hard standing finished even and smooth without using extra cement (PCC shall be laid in alternate bays in panels of size not exc 2.4m x 2.4m or as directed) complete all as specified and as directed.

M&L for Forming 12 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' complete all as specified and directed.

M&L for PCC 150 mm thick (1:3:6) type C2 (using with 40 mm graded crushed aggregate) in su b base floor complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Demolition of cement concrete (reinforced) in floors / pavings n exc. 15 cm thickness, (below or above ground level) complete all as specified and directed.

M & L for pre-cast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in man hole cover slabs, of any thickness, size or shape including necessary from work, finished concrete surfaces fair and even in cement mortar (1:4) complete all as specified and directed.

M&L for Reinforced cement concrete, (1:2:4) Type B1 (using 20 mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified and directed.

M & L for mild steel 10 mm dia and over TMT bars cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed. .

Hacking out old broken glass from metal frame of any thickness including punching or drilling out old glazing pins/springs clips and S&F for 3mm thick ordinary sheet glass and glazing with oil putty nexc .50 sqm in each pane complete all as specified and directed.

S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. .

Dismantling of brick work built in cement mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for Bricks work with sub class 'B' bricks , in brick on edge walls (less than 1/2 brick thick), build in CM (1:4) and flush pointing in CM (1:3) complete all as specified and directed.

M&L for Brick work with subclass ‘B’ bricks, in brick-on-edge on floor, bedded and jointed in CM (1:6) and flush pointing in CM (1:3) complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices complete all as specified and directed.

M & L for glazed ceramic coloured tiles 7mm thick 300 x 450 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10 mm thick cement sand rendering (1:4) complete all as specified and directed.

M & L for glazed ceramic coloured tiles 7mm thick 300 x 200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10 mm thick cement sand rendering (1:4) complete all as specified and directed. Note:- Tiling is on curved surfaces like walls of RCC circular tanks and RCC rectangular channels, rates deemed to included for all these aspects and nothing extra will be paid.

M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15 mm thick cement and sand screed (1:6) as in floors complete all as specified and directed.

M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15 mm thick cement and sand screed (1:6) as in floors complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes in opening as per specification & drawing given in SSR-2009 complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘c’ channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheets 5 mm thick for top rail, lock rail & bottom rail on either side & as gap insert for tap rail & bottom rail, paneling of plain colour PVC sheets to be fitted in the MS frame walded/sealed to the stiles & rails with suitable PVC sheet beading and joined to getger with solvent cement supplying & filling in the frame at site as per specification & drawing given in SSR-2009 complete all as specified and directed.

S&F 100 mm Aluminium anodised,barrel tower bolts of extruded section complete all as specified and directed.

F&F Butt hinges 100mm , extruded Aluminium alloy with galvanized mild steel hinge pin,anodised and fixed , type B-21 complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type,anodised complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters but area exceeding 1.00 Sqm and not exceeding 2.0 Sqm complete all as specified and directed.

S & F pressed steel door frames of size 105X60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

M&L for plain Cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) for filling of pressed steel frame and hold fast blocks complete all as specified and directed.

S & F plain framed paneled shutters, any No. of panels with panels of plywood 9mm thick for two or more panel construction and 12mm for single panel construction, BWR conforming to IS fixed to timber frame of 2nd class hard wood, 35mm thick all style & rail are as per SSR Part – I complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, hamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and directed.

S & F mild steel bow handle stove enamelled black, 150 mm long complete all as specified and directed.

S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250 mm complete all as specified and directed.

M & L for preparation of new suface of wood or wood based surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F factory made steel windows, with side hung shutters including projecting type hinges/box type qith steel handle and steel peg stay complete with glazing bars dovetailed or welded with one shop coat of red oxide primer complete all as specified and directed.

S & F in repairs factory made steel ventilators with top hung shutter incl hinges steel pegs & stays complete all as specified and directed.

S&F for 3mm thick ordinary sheet glass and glazing with oil putty nexc .50 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

M & L for preparation of new suface of steel over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&Fanodised Aluminium frame for doors,windows, ventilators with section weighting 0.98 kg/rm with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodised Aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

Supply & fixing aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate140mm complete all as specified and directed.

S&F in repair vitreous china urinal Half stall type white with grating and union for discharge pipe including providing and fixing plugs bedding urinal against wall in CM (1:2) securing urinal to plugs with and including wast pipe & Urinal Spreader complete all as specified and directed.

S & F in repair Vitreous china wash hand basin white flat black of size 550 x 440 mm including brackets, waste pipe and waste fitting 40 mm brass chromium plated and waste pipe and 15 mm dia PVC connection with brass nuts complete all as specified and directed .

S & F in repair vitreous china squatting pan Orrisa pattern size 580 mm x 440 mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed.

S&F in repairs vitreous china Wash down water closet (padestal pattern) EWC with s and p trap including connection to drain ( or outgoing pipe ) and to flush pipe including seat cover complete all as specified and directed.

S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.

S & F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including fixing camber brackets and connecting union to pipe overall size 495 mm x 420 mm bowel size 410 mm x 330 mm x 160 mm including waste pipe and coupling complete all as specified and directed.

S&F in repair waste pipe (LDPE) of 32mm dia for waste coupling complete all as specified and directed.

S&F in repair 15 mm bib taps , chromium plated fancy type cast copper alloy with crutch or butterfly handle , screwed down, secrewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair15 mm Pillar taps, cast copper alloy, with capstan heads, chromium lated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm concealed stop valve fancy type chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

Taking down steel tubing 15 mm bore and connections complete all as specified and directed

S & F 15 mm bore medium grade tube galvanised with all fittings and fixed in complete concealed including groove cutting for concealing to walls & ceiling or laid in floor complete all as specified and directed

Taking down steel tubing 20 mm bore and connections complete all as specified and directed.

S & F 20 mm bore medium grade tube galvanised with all fittings and fixed in complete concealed including groove cutting for concealing to walls & ceiling or laid in floor complete all as specified and directed.

Dismantling water tanks of 500 ltrs and removing to store complete all as specified and directed.

S & F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed.

S&F 20 mm float Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 1 0 gms ) complete all as specified and directed

S & F in repairs 20 mm, fancy type chromium plated bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

Taking down cement plaster/dado on brick wall including racking out joints, hacking for keys scrubbing down with water complete all as specified and directed.

M & L for 5 mm thick rendering in Cement Mortar (1:3) to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces or other than fair faces of brick work in CM (1:6) finished even & smooth complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work in CM (1:4) finished even & fair without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick on concrete surfaces straight/curved in CM (1:4) finished even & fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered suface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered suface of wall and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of new plastered suface of wall and applying two coats of cement base paint over a coat of primer on wall complete all as specified and directed.

S&F in repair 1.25 mm lath thickness rolling shutters, without ball bearing, as specified including top cover, anchoring rod , hasp and staple and one shop coat of primer ; erected in position as indicated, complete : push pull or manual type, complete all as specified and directed.

All as per serial item No. 76 above but fixing and greasing or other material required to make that in woking condition.

M&L for Preparing old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

M&L for Preparing old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots and applying two coats of white wash complete.

M&L for Preparing old painted surfaces of walls, Chajjas, etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified and directed.

M&L for Preparing old painted wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparing old painted steel and iron surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter wide & not exceeding 1.5 meter in depth for foundations of manholes, sewerage pipe lines etc including getting out complete complete all as specified and directed.

S & F PVC pipe grade ‘A’ single socketed 110 mm dia in any length, jointing with cement solvent solution, laid in trenches or in floors including demolition of existing pipecomplete all as specified and directed.

Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pip up to and incl 150 mm bore pipes complete all as specified and directed.

M & L PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in concrete bed to drain pipes of 150 mm dia including packing under and completely surrounding the pipes with concrete after laying and testing of the pipes complete all as specified and directed.

M&L for 150 mm dia ( internal) SGSW pipes grade ‘A’ laid in trenches & jointed complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for providing 75 mm thick plain cement concrete (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over 20mm cement screed base as in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as directed.

M&L for providing and laying chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in copings, packing around interlocking paver blocks complete all as specified and directed.

M&L for rendering 20 mm thick (avg thickenss) on roof surface including flashing and junctions of parapets etc finished even and fair in CM (1:3) mixing with WPC as per recommended by manufacturer ratio after brushing cement slurry @ 1.2 Kg/Sqm all as specified (WPC to be measured and paid separately) complete all as specified and directed.

Dismantling wrought iron or mild steel wotk of any description not other wise provided for complete all as specified and directed.

S & F framed work such as grills, cooler stand ,grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embeded in conc, bk wk, etc, incl taking out embeded portion and making good disturbed ground, complete all as directed.

Dismantling Chain link fencing/wire Mesh , any type complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm thick, watering and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using (40 mm graded crushed stone aggregate) as in foundation of boundry pillars, posts (including caps and bases) complete all as directed.

S&F mild steel work as in posts and struts in fencing including cutting tops in shape as directed drilling holes, notching for wire etc. etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair galvanised, 2 strands, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. complete all as specified and directed.

M&L for preparation of steel surfaces or surface of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply ony mild steel galvanised chain link fencing of mesh size 100 x 100mm and dia of wire as 10 gauge etc completred all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provission of binding wire complete all as specified and directed.

Supply only Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,n exc 5cm long and dia of Neck 11-15mm complete all as specified .

Supply only Mild steel round bars of 10mm dia and above etc all as specified .

Material and Labour for Preparation of new steel and iron surface of any description n.exc 10cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply only integral water proofing Compound ISI marked.

M&L for steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes complete, tubes conforming to IS 1161-1979 complete all as specified and directed.

M/s Kataria Construction Company

M/s GURFATEH BUILDERS

MODERN ENTERPRISES

MS GURTEJ SINGH CONTRACTOR

M/s Rohit Construction Co.