PERIODICAL SERVICES TO CERTAIN BUILDINGS OF ZONE-I AND ZONE-II TECHNICAL AREA AT RCI HYDERABAD UNDER GE I RND RCI HYDERABAD

Amount

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:4, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:6, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 5mm thick rendering in cement mortar 1:3, on ceilings of concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar including disposal of debris off the premises complete all as directed.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L, preparation of New plastered surfaces of walls and applying water proof external wall care putty, including rubbing/grinding with sand paper and making surface even and smooth to receive external emulsion and applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment from externa/ internal surfaces of walls , scrapping, rubbing/wire brushing, sand papered and watering with jet etc., and applying.

M&L applying one coat of water proof wall care putty, 1.5 mm thick (average) including rubbing/grinding with sand paper and making surface smooth and even complete all as specified and as directed.

M&L applying a coat of alkali resistant primer on wall surfaces all as per manufacturer's instruction complete all as specified and as directed.

M&L applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality on exernal surfaces of walls at any height , all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparing old plastered surfaces of walls, ceilings, cornices, soffits of slabs and chajjas fins and facias etc., and applying one coat of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality all as per manufacturer's instruction complete all as specified and directed.

M&L, preparing old plastered surfaces of walls, ceilings, cornices, soffits of slabs and chajjas fins and facias etc., and applying two coat of weather proof anti algal exterior acrylic emulsion paint (100% acrylic) on over head tank or RCC Reservoir/tower including column, bracing, beam and doms etc upto the height of 21 mtr, premium quality all as per manufacturer's instruction complete all as specified and directed.

Preparation of old plastered surfaces of walls/ ceilings including cornices, pilasters etc., complete all as specified and directed.

M&L, for applying one coat of distemper oil emulsion for old surface complete all as specified and directed.

M&L applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed.

M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for one coats of synthetic enamel paint on old rusted steel surfaces including praparation of surface with scraping/removing corrosion layer and making good with metal putty, applying red oxide prime coat complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying Two coat of synthetic enamel paint over Head reservoir tank railing, ladder, bracing, water pipe upto the height of 21 mtr. complete all as specified and as directed.

M&L, French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and as directed.

M&L, Writing letters or figures (Block Roman, Italic or Indian) not exceeding 30cm high using synthetic enamel paint of approved tint complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick (below or above ground level) all as specified and as directed by the Engineer-in-Charge.

M&L for PCC type-C2 (1:3:6 ) using (40mm graded stone aggregate) as in 75mm thick sub base of interlocking tiles/ concrete tiles.

Demolition of stone slabs, tiles, cement concrete tiles/paver blocks of any description or thickness in floors, laid and bedded in any mortar including disposal of debris off the premises complete all as directed.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; (with grey cement & no pigments) set jointed and pointed in neat cement slurry in floors, and cut and polished including 15 mm thick screed bed layer in CM 1:4. Complete all as specified and directed.

M&L for preparation and applied on coat of indigo paint on Chequerred tiles/Interlocking paver blocks etc. All as specified and directed.

jmd engineers (BID ID -3351944)

Anjana corporation (BID ID -3360351)

sri vishnu enterprises (BID ID -3363051)

rahi consultant (BID ID -3362598)

MM PROJECTS (BID ID -3363520)

BHAGYARAM ENTERPRISES (BID ID -3361515)

SRI SAI ENTERPRISES (BID ID -3359044)

PAVAN ENTERPRISES (BID ID -3361434)

the bhimani group of companies (BID ID -3352378)