Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.1 LAccepted-AOC 184 C 13 THURAIYUR SAMINATHAN NAGAR PERAMBALUR SALAI TIRUCHIRAPPALLI TAMIL NADU 621010 UDYAM TN 27 0052941 | TIRUCHIRAPPALLI | TAMIL NADU | 621010 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹35.7 L+₹43,908 (1.25%)Rejected-Finance THE JEHOVAH SHALOM 21 THIRUMALAISAMY STREET LAKSHMI NAGAR EXTN KAVUNDAMPALAYAM COIMBATORE 641030 | COIMBATORE | COIMBATORE | TAMIL NADU | 641030 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹36.4 L+₹1.1 L (3.16%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹38.7 L+₹3.4 L (9.72%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹38.7 L+₹3.4 L (9.74%)Rejected-Finance 47A C3 OLD DAMU NAGAR PULIAKULAM COIMBATORE 641 045 | COIMBATORE | COIMBATORE | TAMIL NADU | 641045 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF TRIVANDRUM
CWE AF TRIVANDRUM HQ SAC IAF COMPLEX AKKULAM THURUVIKKAL POST TRIVANDRUM 11
Upgradation of certain E/M and B/R Works in Civilian and NCs(E) Md Accn at AFS sulur
2024_MES_671457_1
82525/E8 Upgradation of certain E/M and B/R works in civilian and NCs(E) Md Accn at AFS Sulur
Open Tender
Construction Works
Item Rate
180 days
Sulur
Class D Category
a(i)
7 documents required · 7 mandatory
₹500
GE AF Sulur
₹88,000
Yes
28 Nov 2024
4 Sept 2024
3 Oct 2024
4 Sept 2024
30 Sept 2024
23 Sept 2024
4 Sept 2024 - 10 Sept 2024
Amount
Taking down cement plaster on brick or stone walls, or concrete or ceilings, roof in any position including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and fair complete all as specified and as directed.
Supply Only integral water proofing compound complete all as specified and as directed.
M&L rendering 5mm thick on ceiling of concrete surfaces in CM 1:3 complete all as specified and as directed finished even and smooth without using extra cement complete all as specified and as directed.
M&L preparation of new plastered or unplastered surface of ceiling, and applying two coats of white wash on ceilings complete all as specified and directed
M&L rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even and smooth without using extra cement complete all as specified and as directed
M&L preparation of new or plastered or unplastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and as directed.
M&L rendering 15mm thick in cement plaster 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even and smooth without using extra cement complete all as specified and as directed
M&L preparation of new plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and as directed.
S&F in repairs 25 mm outer dia of pipes 3-layer PP-R (Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. including taking down existing pipe all as specified and as directed.
S&F in repairs 20 mm outer dia of pipes3-layer PP-RP o l y p r o p y l e n e random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including taking down existing pipe all as specified and as directed.
Note for item No 10 & 11 :- (a) The unit rate quoted shall include for taking down existing GI pipe and connections and all fittings as directed. (b) The unit rate shall be include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc. and fixing accessories such as pipe hooks, screws clamps etc. (c) Wall thickness of pipes shall be all as per IS : 15801
S&F in repairs 20mm outer dia PPR gate valves (brass insert) as per requirement of sites complete all as specified and as directed.
S&F in repairs 25mm outer dia PPR gate valves (brass insert) as per requirement of sites complete all as specified and as directed.
M&L PVC connection 15 mm size with PTMT nuts of length 450 mm including taking existing one complete as directed by Engr-in-charge.
M&L 32 mm low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm for WHB Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
M&L PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in coping of including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L Doom grating 125mm dia with waste hole of PTMT(minimum weight 40gms) Including taking down existing one complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, treading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed.
M&L preparation of old decorated plastered or unplastered surface of wall, chajja, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L preparation of old plastered or unplastered surface of ceiling brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds, mass, efflorescent , treading, oil, greasy spots including removal of existing colour/treatment, dirt, dust etc. and applying two coats oil bound distemper complete all as specified and as directed.
M&L preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and as directed.
M&L Preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and as directed.
S&F Bib Cock with wall flange screwed down screwed for iron pipe 15mm bore including taking existing one complete all as directed by Engr-in-charge Make:- CAT Part No Qt F2006152 HT F3001152 of CERA or equivalent model of other manufacturers from the approved list.
S&F Angular stop cock, valves high pressure screwed both ends iron pipe or for unions 15mm dia, including taking down existing one complete as directed by Engr-in-charge. Make:- CAT Part No QT F2006201 HT F3001201 of CERA or equivalent model of other manufacturers from the approved list.
M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado over and including 10mm thick 1:3 backing coat including taking down existing tile and removing rubbish off the premises complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises and M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed. Note for item No. 26 & 27:- The manufacturer's test certificate of Tiles shall be submitted for approval by the concerned authority prior to installation.
M&L for treatment of the sunken floor slab as follows all as specified and as per manufacturers instruction:- Make :- Dr Fixit/ M/s Sika India Pvt Ltd/ STP Ltd/ M/s Fosroc Chemicals
(a) Demolition of cement concrete filling of any description in sunken portion in toilet and removing debris outside MD land. (b) Cleaning the sunken/ lowered portion of RCC slab surfaces (including vertical - total depth plus skirting height) by wire brush, chisel out any mortar sticking to the surface and brooming completelyand provide 40mm thick (average) PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout (c) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. After proper curing, Fill it with water and verify dampness and seepage. If dampness/ seepage is noticed, nozzles shall be fixed and grouting shall be carried out. (d) All junctions points of side wall where CI/ GI pipes are passing through shall be sealed with epoxy putty. (e) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (f) Applying two coats of polymer modified cementitious water proof coating as per manufactures instruction to bottom and vertical sides up to finished floor level + 100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand shall be sprayed to the vertical and bottom surface of the sunken portion all as specified and directed (g) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed or as per manufacturers specification including rounding of corners and junctions sloping towards spout. (h) PCC 1:5:10 type E2, complete all as specified (j) PCC 1:2:4 type B0 40mm thick, complete all as specified Note:- (i) Quoted rate shall deemed to be inclusive of cost of WPC & all the above provisions. (ii) Ponding test shall be carried out for the water proofed area by filling water for at least 72 hours and tested for leakage, seepage and to the entire satisfaction of GE. Test shall be carried out in the presence of reps of Engineer-in-Charge and record for each sunken slab shall be kept duly signed by all concerned. The treatment shall be carried out through the authorised applicators of chemical manufactureres. Cost of testing shall be deemed to be included in the rates quoted.
M&L for Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, PVC horizontal pipe embedded in floor in bathroom or kitchen making good the damage portion of flooring, laying and matching of tiles in the existing flooring using suitable chemicals complete all as specified and as directed by the Engineer-in-Charge. Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit
M&L for Repair of leakage/seepage from the wall/ door bend /door tee/ 'Y' junction/ 'T' Junction of soil pipe / waste pipe/ vent pipe of kitchen/ bathroom/WC of the upper Qtr or at the ground floor Qtr including change of any damage soil waste pipes or fittings of any shape, specification and size using suitable chemicals, making good to the damage portion of wall with brick work in cement mortar 1:6 or cement concrete 1:2:4 and plastering to wall in CM 1:4 and matching to existing wall complete to avoid the leakage/ seepage at the site of work as directed and specified by the Engineer -in- charge Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit
Note for item No 29 & 30 :- (a) Find out main cause of leakage and take necessary steps to resolve / rectify. (b) The rate also includefor provision of new NT/FT & replacement of tiles as required. (c) The unit rate quoted shall be deemed to be included for required bonding chemicals to arrest the leakage/seepage as directed by the manufacturer.
S&F in repairs Vitreous China wash basin, white, flat back, size 580x450mm (for domestic use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.
S&F in repair Towel rail 24" long for wash basin all as specified and as directed. Make: Make : CAT Part No-ACN-1111NM of Jaguar series or equivalent model of other manufactureres from the list.
S&F in repairs Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor including provision of lime concrete bedding complete all as specified and as directed.
S&F PVC (SWR) P trap 110 mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) S trap 110mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall including taking down existing complete all as specified and as directed.
S&F PVC (SWR) 75mm bore junction (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) branch piece single (single Y) 75mm bore equal or unequal provided with access door including taking down existing one complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) bends 75mm bore including taking down existing one complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) 75mm bore vent cowl including taking down existing one complete all as specified and as directed by Engineer-in-Charge
M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall including taking down existing complete all as specified and as directed.
M&L PVC bends 110mm bore including taking down existing one complete all as specified and as directed.
M&L PVC (SWR) 110mm junction (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed.
M&L PVC (SWR) 110mm vent cowl all as specified including taking down existing one complete all as specified and as directed.
Removing plant / Uprooting of vegetation growth including roots on wall/roof/parapet/Shaft portion , near pipes etc. and applying acid treatment after removing roots for preventing re-growth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface complete all as specified and as directed. Note :- (a) Rate quoted by the tenderer shall be deemed to inclusive of double steel scaffolding. (b) Contractor shall provide safety gears to his workers at his own cost and ensure suitable safety precaution to avoid accidents.
M&L taking down existing Rotational moulded polythene water storage tank exc 500 Ltrs capacity but n.exc 1000 Ltrs capacity and refixing in the same position including fittings etc. complete all as specified and as directed.
M&L for Taking down steel tubing 20 mm bore and connections including cleaning and refixing of old GI tubing 15mm bore including connections in new or old position (wall, ceiling & floor complete all as specified and as directed
M&L for Taking down steel tubing 25 mm bore and connections including cleaning and refixing of old GI tubing 15mm bore including connections in new or old position (wall, ceiling & floor complete all as specified and as directed. Note for Item No 48 & 49 :- The unit rate quoted is inclusive for necessary fittings required for re-connection.
M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.
M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and as directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as directed.
M&L Plain cement concrete1:2:4 type B-0, (12.5mm graded stone aggregate) as in roof kerbs, benching rounded or chamfered on edge all as specified complete all as directed.
Taking down chowkhat or frame (wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.
S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.
Supply and fixing 100 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.
Supply and fixing 75mm long stainless steel Butt hinges complete all as specified and as directed.
S&F 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one all as specified and as directed.
M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area glass not exc 0.5 sqm each pane complete all as specified and as directed.
M&L for Bullnosed chequered cement concrete tiles 30cm x 30cm x 25mm thick machine pressed set jointed and pointed in neat cement slurry as in treads and cut and polished using grey cement and pigments over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including taking down existing tiles complete all as specified and as directed by Engineer-in Charge. Note :- The manufacturer's test certificate and individual test certificate of tiles must be submitted for approval by the concerned authority prior to installation
M&L Chequered cement concrete tiles machine pressed set jointed and pointed in neat cement slurry on vertical surfaces as in skirting, dados and risers of steps and cut and polished using grey cement and pigments over and including backing coat of cement mortar 10mm thick for laying floor finishes in cement mortar (1:3) including taking down existing tiles complete all as specified and as directed by Engineer-in Charge. Note :- The manufacturer's test certificate and individual test certificate of tiles must be submitted for approval by the concerned authority prior to installation
M&L Vitrified tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal off to outside MD land all as specified and as directed.
M&L Vitrified tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including backing coat of 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal of to outside MD land all as specified and as directed.
S&F in repairs PVC valveless syphonic action type flushing cistern 10 ltrs capacity low level, white, with inlet ball valve, float & handle including brackets and flushing pipe complete all as specified and as directed.
S&F 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood/steel/aluminium of sectional area glass not exc 0.5 sqm each pane complete all as specified and as directed.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L Preparation of new steel surfaces of any description over 10 cm girth / width and applying two coats of synthetic enamel paint including over a coat of red oxide primer complete all as specified and as directed.
S&F Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved by GE complete all as specified and as directed by Engineer-in-Charge
S&F 18mm thick, 7 ply, plywood, grade BWR, type BB fixed to wooden frame work in wall with nails including taking down all as specified.
S&F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen one complete (Make : BIR SS or equivalent make as per list of makes)
S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and as directed by Engineer-in-Charge
S&F Stainless steel telescopic slider of 500 mm of approved pattern and make suitable for drawer in base unit in kitchen complete all specified and as directed.
S&F Continuous(Piano)hinge 30mm width of flap, bright finish of electrolyte complete all as specified and as directed by Engineer-in-Charge
S&F Stainless steel plain basket of size 530 x 505 x 100mm complete all as specified and as directed by Engineer-in-Charge. Make : Butterfly or equivalent make as per list of makes in PS
S&F Stainless steel bottle basket of size 200x 508x 431mm complete all as specified and as directed by Engineer-in-Charge. Make : Butterfly or equivalent make as per list of makes in PS
S&F Stainless steel thali basket of size 600x 500x 100mm complete all as specified and as directed by Engineer-in-Charge. Make : Butterfly or equivalent make as per list of makes in PS)
S&F Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen complete (Make : Spykar or equivalent make as per list of makes)
S&F Brass 4 lever cupboards locks grade I size 65mm complete all as specified and as directed by Engineer-in-Charge
S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed by Engineer-in-Charge
S&F 6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails complete all as specified.
S&F plate rack of size 65cm x 96cm made out stainless steel complete all as specified and as directed.
S&F 18/19mm thick both side Prelaminated particle board, interior grade, with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
M&L Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in CM 1:4 in repairs complete all as specified and directed by Engineer-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and as directed.
S& F in repairs 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete
M&L 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even and fair without using extra cement all as specified.
S&F in CP sink cock with swinging casted round shape spout screwed down screwed for iron pipe in repairs 15mm bore170mm long swivel spout and wall flange complete. Make : CAT part No QT F2006251 HT F3001251 of CERA or equivalent model of other manufactureres from the list given in PS.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete
S&F Waste coupling of PTMT (half or full threaded) of 40mm bore dia of discharge pipe . (Minimum weight 32mm- 45gms/40mm-60 gms)
Demolition of cement concrete (reinforced) in of any description and in any position and removal of debris out of MD land complete all as specified and as directed.
Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed.
M&L Brickwork with fly ash’ bricks using with old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 , complete all as specified and as directed
Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each complete all as specified and as directed.
Cutting holes in stone wall exc half brick and n.exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed.
M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Supply and fixing 200 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.
Supply and fixing in repairs 200 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.
Supply and fixing in repairs 100 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one all as specified and as directed.
S&F 200mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed.
S&F 200mm extruded aluminium alloy handles, fabricated type, anodised including taking down existing one complete all as specified and as directed.
Supply and Fixing 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and as directed.
Supply and fixing 100mm long Butt hinges stainless steel, and fixed complete all as specified and as directed.
Supply and fixing 100mm long Butt hinges stainless steel, fixed in repair to wooden frame/welded to metal frame complete all as specified and as directed.
Supply and fixing in repairs butt hinges 75 mm long stainless steel complete all as specified and as directed.
S&F Factory made 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and as directed.
M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Supply and fixing in repairs aluminium handles cast type anodised 150 mm long complete all as specified and as directed.
S&F 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and Fixing in repairs 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed.
S &F in repairs 12mm thickness Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and as directed.
S&F in repairs Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed.
M&L for Point Wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl PVC Casing Capping with accessories in wall/roof/ceiling/hangar steel frames etc incl Mpodular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for one switch socket outlet 3 pin 5 Amps on independent board
All as per Sl item No. 120 herein above but with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket on independent board
S&F modular switch 1 way 6 Amps, 1 module.
S&F modular switch 1 way 16 Amps, 1 module.
S&F modular socket outlet multipurpose 2/3 pin 6 amps, 2 module.
S&F modular socket outlet multipurpose 2/3 pin 6/16 amps, 2 module.
S&F white cover plate with frame, 3 Module.
S&F metal flush box 3 module.
KUMAR AGENCIES (BID ID -3121489)
D.R ASSOCIATES (BID ID -3122519)
T SANJEEV KUMAR (BID ID -3110290)
KRISHNA ENTERPRISES (BID ID -3110277)
S KUMARAN (BID ID -3121209)
SAMYDOSS CONSTRUCTIONS (BID ID -3120356)
GMS Builders (BID ID -3122447)
G Perumal and co (BID ID -3120797)
p.chinnasamy (BID ID -3120131)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .