REPAIRS UPHOLSTER OF SOFA SETS CHAIR COMPUTERS REVOLVING AND REPAIRS TO CHARPOY GI CHARPOY IP FOLDING TABLE COMPUTER AND PAINTING POLISHING TO STEEL WOODEN FURNITURE AT ARAKKONAM

Amount

SOFA SET Removing the existing worn/torn out tapestry cloth cover of cushion from sofa set 5 Seater (3+1+1) back and replacing with new tapestry cloth which shall not cost less than Rs.300/- per meter. Old cushion has to be replaced with 50mm thick 40 density cushion of approved make , quality and colour shall be as approved by GE all as specified and directed by Engr-in-Charge .Drawing No.FD-258, Make : Sleepwell/Kurlon

Removing the existing worn/torn out tapestry cloth cover of cushion from sofa set 4 Seater (4+1+1) back and replacing with new tapestry cloth which shall not cost less than Rs.300/- per meter. Old cushion has to be replaced with 50mm thick 40 density cushion of approved make , quality and colour shall be as approved by GE all as specified and directed by Engr-in-Charge .Drawing No.FD-258, Make : Sleepwell/Kurlon

Removing the existing damaged cushion from 5 seater sofa set and replacing with new cushion of 40 density of approved make and size of 570mx520x100 mm duly covered with new tapestry cloth over a long cloth, tapestry cover shall not be less than Rs. 300/- per meter with provision to open the cover using zip of approved quality and colour complete all as specified and as directed by Engr - in - Charge Drawing No FD-258 Make of Cushion : Kurlon/sleep well

Removing the existing damaged cushion from 4 seater sofa set and replacing with new cushion of 40 density of approved make and size of 570mx520x100 mm duly covered with new tapestry cloth over a long cloth, tapestry cover shall not be less than Rs. 300/- per meter with provision to open the cover using zip of approved quality and colour complete all as specified and as directed by Engr - in - Charge Drawing No FD-258 Make of Cushion : Kurlon/sleep well

Removing the existing unserviceable /broken components from sofa 5/4 seater and replacing the same with first class hard wood (Teak wood) including polishing of any size and shape for the follwing complete all as specified directed by the Engr-in-Charge.Drawing No FD-258

(a) Front leg

(b) Rear leg

(c) Handle

(d ) Side Rail

(e) Front/Back rail of 3 Seater

(f) Front/Back rail of Single Seater

(g) Ply wood 12 mm thick for 3 seater

(g) Ply wood 12 mm thick for 2 seater

(h) Ply wood 12 mm thick for Single seater

CHARPOY GI/IP PIPE WITH PLY TOP Removing existing unserviceable long rail of charpoy GI pipe and replacing with new long rail of GI 32 mm dia medium grade ISI marked of approved make duly threaded at both side complete all as specified and as directed by Engr-in-Charge. Make : PrakashSurya/Jindal/TATA . Drawing No.FD-220

Removing existing u/s short rails from Charpoy GI and making short rail from existing long rail removed from Item No.2.00 by cutting serviceable portion into a required size as per drawing and fixing with charpoy duly threaded on both sides of the pipe complete all as specified and as directed by Engr-in-Charge .Drawing No.FD-220

Removing existing unserviceable legs from Charpoy GI and making leg from short rail removed from Item No.2.01 here - on before by cutting serviceable portion into a required size and bottom of leg shall be plugged with 3 mm thick mild steel welded to bottom of legs. Two nos of flat iron 25 x 3mm MS clamp made to shape as shall be welded to GI Legs as shown on drawing and fixing to frame of GI charpoy duly threaded complete as specified by Engr-in-Charge .Drawing No.FD-220

Removing existing unserviceable 3 way Elbow and re-fixing with new 3 way elbow 32mm dia with ISI Mark complete all as specified and directed by Engr-in-Charge Drawing No.FD-220

Removing existing unserviceable check nuts and supply and fix with new GI check nuts all as specified and as directed by Engineer-in-charge. Drawing No.FD-220

Supply and fix in repair 12mm thick plywood BWR grade type 'BB' of size 1980x915 mm for charpoy GI/ IP plywood Top complete all as specified and as directed by Engr-in-Charge Drawing-FD-220 & FD/MAP-II/01. Make : Greenply/Century/Archid ply

CHARPOY IP FOLDING Removal of existing old/damaged commercial ply and supply and fix 12 mm thick plywood of size 900x900 mm(02 Pieces) with suitable nut and screw for charpoy IP folding and two coats of synthetic enamel black painting of work for legs and frame and supply and fix open ends of U shaped frame shall be joined by flat iron gusset pipe plate 02 Nos cut to shape out of 140x110x3mm mild steel sheet and 8 mm dia rivets complete all as specified and as directed by Engr-in-Charge. Make : Greenply/Century/Archid ply Drwg No : FD-338

CHAIR COMPUTER Removing the existing unserviceable /broken components from Chair Computer and replacing the same with new components for the follwing complete all as specified directedby the Engr-in-Charge.Drawing No TP

(a) Wheel (Set of 5)

(b) Base without wheel

(c ) Hydrauclic Pressure System

(d) Seat Ply wood 12 mm thick

(e) Back Ply wood 12 mm thick

(f) Foam 50 mm thick for Seat

(g) Foam 50 mm thick for Back

(h) Removing the existing worn/torn out cloth covering seat and back of Chair Computer and replacing cushion and cloth with new cushion and tapestry cloth which shall not be less than Rs. 200/- per RM and quality and colour shall be as approved by GE all as specified and directed by Engr-in-Charge .Drwg No : TP

(j) Handle(Pair)

CHAIR EXECUTIVE Removing the existing unserviceable /broken components from Chair Excutive Revolving/Chair Revolving and replacing the same with new components for the follwing complete all as specified directedby the Engr-in-Charge.Drawing No TP

(a) Wheel heavy duty (Set of 5)

(b) Base without wheel

(c ) Hydrauclic Pressure System Heavy Duty

(d) Seat Ply wood 12 mm thick

(e) Back Ply wood 12 mm thick

(f) Foam 50 mm thick for Seat

(g) Foam 50 mm thick for Back

(h) Removing the existing worn/torn out cloth covering seat and back of Chair Executive and replacing cushion and cloth with new cushion and tapestry cloth/Rexine and colour shall be as approved by GE all as specified and directed by Engr-in-Charge .Drwg No : TP

(j) Handle(Pair)

Preparation of following steel furniture by removing placord and scrapping down the entire old paint applying putty to obtain even surface and applying two coats of synthetic enamel paint of Olive Green/ Olive Gray shade by spray painting machine over a coat of red oxide primer to internal and external surfaces etc., complete all as specified and as directed by Engr-in-charge.

Almirah large steel with shelves. Drwg No: FD-67

Almirah medium/small steel. Drwg No: FD-243/1032/114M

Almirah large with glass door. Drwg No: FD-104

Almirah Med with glass door. Drwg No: FD-104

Rack pegion hole. Drwg No: FD-106

Rack six tier adjustable. Drwg No: FD-106(M)

Stool steel 305 x305 x510mm Drwg No: FD-81(M)

Rack stationery. Drwg No: FD-81(M)

Rack side 3 tray. Drwg No: FD-97(M)

Book case. Drwg No: FD-90

Chair Easy steel with Cushion Drwg No: FD-358

Chair school with Hand Board Drwg No: FD-TP

Chair CBB/CBA steel. Drwg No: FD-75

Table office clerk steel. Drwg No: FD-84

Table office officer steel. Drwg No: FD-84

Rack steel 1830x1905x760mm. Drwg No: FD-129

Book self open large. Drwg No: FD-69(L)

Book self open small. Drwg No: FD-69(M)

Almirah large steel 1/2'x1/2'. Drwg No: FD-114(M)

Filing cabinet 4 drawer. Drwg No: SD-1364

Flying cloth locker. Drwg No: SD-1365

Shoe rack steel (Black Paint). Drwg No: E6/MAP/IIR

Teapoy varandah (White Paint). Drwg No: FD-255

Chair copolymer (Black Paint). Drwg No: TP

Almirah map with drawer. Drwg No: FD-83

Stool revolving adjustable. Drwg No: FD-103(M)

Table 900 x 900 x 760mm Steel Drwg No: FD-1009

Table 900 x 600 x 760mm Steel Drwg No: FD-1008,1007

Table dining Ors. Drwg No: FD-165

Foam with back. Drwg No: FD-78

Foam without back. Drwg No: FD-77

Locker steel. Drwg No: FD-1029

Bench work shop 1500x900x760 mm. Drwg No: FD-1024

Bench work shop 1800x900x760 mm. Drwg No: FD-1024

Blow plast co-polimer 3-in-1 chair with arms. Drwg No: TP

Preparation of old painted surfaces of ladder for loft scrapping down the entire old paint applying putty for even surface and applying one coat of synthetic enamel paint of black shade over a coat of red oxide primer on external surfaces etc., complete all as specified and as directed by Engr-in-charge. Drwg No: FD-238

Preparation of following wooden furniture by removing placard and old polish from wooden surface and rubbing with sand paper to make the surface smooth including filling the cavities with wooden filler and free from all dent and applying one or more coat of french polish until high glossy finish is obtained complete all as specified and as directed by Engr-in-charge.

Chair writing. Drwg No: FD-250/280

Chair dining. Drwg No: FD-228

Chair easy. Drwg No: FD-229

Table dressing gents. Drwg No: FD-230

Teapoy. Drwg No: FD-232

Table dining 8 person. Drwg No: FD-239

Table dining 6 person. Drwg No: FD-239

Notice board of size 2440x1220mm. Drwg No: FD-99(M)

Notice board of size 1830x1220mm. Drwg No: FD-99(M)

Notice board of size 900x600mm. Drwg No: FD-99(M)

Peg table. Drwg No: FD-236

Stool dressing. Drwg No: FD-252

Table center. Drwg No: FD-235

Table conference /library. Drwg No: FD-108

Bench work shop. Drwg No: FD-145

Table bed side. Drwg No: FD-248

Table 3'x2' with and without drawer. Drwg No: FD-223

Sofa set 4 seater. Drwg No: FD-258

Table writing. Drwg No: FD-249

Table dressing ladies. Drwg No: FD-251

Sofa set 5 seater. Drwg No: FD-258

Sofa set 6 seater. Drwg No: FD-258

Bin soiled linon. Drwg No: FD-244

Bed ply wood top. Drwg No: FD-246

Hat stand with mirror. Drwg No: FD-233

Table Dman/workshop. Drwg No: FD-211

Almirah mess utensils. Drwg No: FD-93(M)

Table special 1500x1000x1400mm. Drwg No: SK-150-1/3

Table special 2300x600x800mm. Drwg No: SK-150-2/3

Table dining 1200x900mm. Drwg No: FD-273

Table 900x900mm. Drwg No: FD-291

TABLE COMPUTER Removing existing unserviceable components from table computer & Supplying following new components as per drewing completely all as specified & directed by Engr -in-charge

Top made out of prelaminated particle board of size 1200x600mm thick exterior grade of required shade & edges shall be covered with PVC lipping all round for smooth finish

Removing the unserviceable talecopiec channel of the drawer & replacing it with new telescopic channel both the side of required size o& of good quality as approved by Engr-in charge for smoot movement of the drawer.

Mahesh Traders (BID ID -3085718)

SHANMUGA TRADERS (BID ID -3078469)

REENA INDUSTRIES (BID ID -3073989)

SHRI S SANTHAKUMAR (BID ID -3093572)

LEO ENTERPRISES (BID ID -3081043)