CERTAIN REPAIR TO JOINERY AND OTHER MISC WORKS AT ZONE I AND II OF NURLA MIL STN UNDER AGE (I) NIMU

Amount

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)

Taking down Chowkhats or frames n.exc 1.5 Sqm (without taking off shutters from the frames)

Taking down Shutters of any description not exc 1 sqm each

Taking down Shutters of any description but exc 1 sqm but n exc 2 sq. m each

Resecuring of Chowkhats or frames not exc. 1.5 sq. m each with out taking down

Resecuring of Chowkhats or frames exc. 1.5 sq. n.exc 4 sqm each with out taking down

Taking down and refixing in the same opening Shutters of any description not exc 1 sqm each

Taking down and refixing in the same opening Shutters of any description but exc 1 sqm but n exc 2 sq. m each

Taking down and refixing in the same opening Shutters of any description but exc 2 sq. m each

Resecuring easing and adjusting of shuter exc. 1 sq. n.exc 2 sqm each with out taking down

Resecuring easing and adjusting of shuter n .exc. 1 sq. with out taking down

M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

M&L 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors all as specified and directed.

M&L 2nd class hardwood 35mm thick Plain, framed, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed by Engr-in-charge.

All as per item No 14 here-in-before but 30mm thick shutters for galzed/fly proof windows complete all as specified and directed.

S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified.

All as per item No 16 here-in-before but in repair complete all as specified and directed.

All as per item No 16 here-in-before but 75mm complete all as specified and directed.

All as per item No 18 here-in-before but in repair complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm long, fabricated type, anodised complete all as specified.

All as per item No 20 here-in-before but in repair complete all as specified and directed.

All as per item No 20 here-in-before but 100 mm long complete all as specified and directed.

All as per item No 22 here-in-before but in repair complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy complete all as specified and directed by Engr-in-charge.

All as per item No 24 here-in-before but in repair complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolt of extruded section, 150mm long (ISI marked), complete all as specified.

All as per item No 26 here-in-before but in repair complete all as specified and directed.

All as per item No 26 here-in-before but 100 mm long complete all as specified and directed.

All as per item No 28 here-in-before but in repair complete all as specified and directed.

M & L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds.all as specified and directed by Engr-in-charge.

S & F 3mm th sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane all as specified and directed by Engr-in-charge.

M&L for preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer incl fliing with wood filler if required complete all as specified and directed.

All as per item No 16 above but one coats on old wooden surfaces without priming coat complete all as specified and directed.

S&F Anodised aluminium frame with Powder Coating of (Min thickness of powder coating is 50 Micron)for doors, windows, ventilators of (Min thickness of powder coating is 50 Micron)with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium door shutters,with Powder Coating of (Min thickness of powder coating is 50 Micron) aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F Anodised aluminium with Powder Coating of (Min thickness of powder coating is 50 Micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Providing and fixing glazing with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed by Engr-in-charge.

S & F 2 mm th Transparent Acerylic sheet all as specified and directed by Engr-in-charge.

M & L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapples all as specified and directed by Engr-in-charge.

All as per item No 28 here-in-before but in repair complete all as specified and directed.

S&F Aluminium die body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg.complete all as specified and directed by Engr-in-charge.

All as per item No 28 here-in-before but in repair complete all as specified and directed.

M/S GHULAM HAIDER (BID ID -3281836)

M/S DAWA ENTERPRISES (BID ID -3281849)