RESURFACING OF ROADS, REPAIR AND RENEWAL OF ROAD FURNITURE IN VARANASI CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per 10 Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. Note : (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for applying thermo plastic reflective paint as in road marking of minimum 2.5mm thickness , single coat as in marking of 100/150mm with using Hot mark thermoplastic paint (Hot application) white / yellow by indegenous modern , propelled road marking machine as directed incl all ingredient such as binder glass bead etc, complete all as specified and directed.

S&F Cat eye of plastic body having two ways reflector with abrasion resistant lens including fixing arrangement as per manufacturer instruction complete all as specified and directed.

S&F Solar stud /Cat eye of size 135mmx105mmx26mm leg 50mm of Aluminium body with a large solar panel , battery 12V/800mAh acrylic reflector and Aluminium frame with Mix Epoxy filler including fixing arrangement as per manufacturer instruction complete all as specified and directed.

S&F MS Solar Delineator with mesh and Pole Powder coated MS Pipe solar Delineator are made up of highly compressive material & water resistent and with fitting of solar flasher (Height of pole is 1000mm) , Base size 75 X80mm Dia is 48mm of the best in terms of both durability and performance as specified and approved including fixing arrangement as per manufacturer instruction complete all as specified and directed.

S&F PVC speed breakers of size 250mm x 350mmx50mm, laid by first marking the loacation of hump on the pavement and marking indents in this area for proper bonding. Surfacing is then cleared of all dust and loose particles and a tack coat applied. Forms of requisite heights, shape and width are then placed, and hot premixed bituminous material is poured to the required shape, and edges rounded by trowel. the premixed marerial should be well compacted before opening to traffic. Allowance should be made for compaction, and irregularities should be corrected using bituminous marerials having fine aggregate or by scrapping , a necessary . the material is then allowed to cure before opening to traffic complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size of 80mm thickness M-40 Grade jointed and pointed with grey cement and pigment including 25mm thick sand cushing laid over & including 75mm thick plain cement concrete, 1:3:6, C2 (using 40mm graded crushed stone aggregate) as in sub base of floor concrete complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed wtih cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint on concrete surface complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for brick work with sub class 'B', straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for providing, cement concrete Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-Charge.

Perfect Enterprises

M/s Rajeev Kumar