COMPREHENSIVE REPAIRS TO CIVIL WORKS TO OTM /OFFICE AT DGQA UNDER GE (N) MUMBAI

Amount

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in 1/2 brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment Treating to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed by Engineer-in-Charge.

Material and labour for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path and finishing the surface even and fair without using extra cement all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor, finishing the surface with even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 100mm thick plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor, finishing the surface with even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc complete all as specified and as directed by Engineer-in-Charge

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exceeding 1.5 sqm each including fittings complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 178 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 125mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix 15 micron coloured aluminium sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of size 7 x 4.5mm thick, fixed with channel of size 38mm x 12mm x 1.3mm, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILL of Associated group or equivalent make as approved by GE

Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs aluminium anodise 25mm dia curtain rail fixing with including provision of pair of brackets, stops, rollers etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles up to a lead of 5km and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles

Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles

Material and labour for glazed coloured ceramic tiles (600mm x 600mm), 7 to 8mm thick, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for coloured glazed ceramic tiles, for skirting, dado, risers, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and as directed by Engineer-in-Charge.

Material and labour for granite (mushroom granite) slab, 20mm thick, machine cut, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including necessary molding of edges as required at site including grinding and polishing, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed.

Material and labour for 18 to 20mm thick machine cut, machine polished green marble slab as in jambs/cills of windows jointed with grey cement slurry and pointed with cement to match the shade of slab with admixture of pigment to match the shade of marble stone including 10mm thick backing coat in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 10 mm thick in cement mortar 1:6 on concrete / brick masonry surfaces and finished even and smooth without using extra cement including necessary formwork/scaffloding , safety belts etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick plaster in cement mortar (1:4) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement including necessary formwork/scaffloding , safety belts etc etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces upto a height of building roof including form work/scaffolding/ladders and safety belt with precautions complete and finishing the surfaces even and smooth without using extra cement including necessary formwork/scaffloding , safety belts etc etc complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for preparation of new plastered wall surfaces and applying two coats of Acrylic weather proof coat 100% exterior grade paint over acrylic primer upto a height of building roof including form work/scaffolding/ladders and safety belt with precautions complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

Material and labour for preparing new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Material and labour for complete removal of existing treatment of paint on old wall/Ceilling surfaces and applying two coats of oil bound distemper with roller over plastered or other etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of undecorated wall/ceiling surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for 15mm thick rendering in cement mortar 1:3 mixed with water proofing compound in sunken floor including vertical surfaces upto 450mm height including applying a coat of Raincoat solution of make Dr Fixit or equivalent with uniform surfaces and supply and fix vitreous china squatting pan Orissa pattern pan of size 580 x 440mm white with integral foot rest, 'P' trap and connecting to flushing pipe, anti syphonage pipe etc (excluding flushing cistern) and connecting piece of CI pipe as per required upto T/Y joint including filling PCC 1:4:8 type D2 and over 40mm thick PCC 1:2:4, type B0 for floor with uniform surfaces and GI spout, medium grade with 50mm dia to provide that 450mm long to be extended from front surface of wall all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC seat cover, chromium plated hinges & nuts including ‘P’ trap / 'S' trap, connection to drain flushing pipe, antisyphonage pipe complete all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Demolition of reinforcement cement concrete of any descriptionand in any position not otherwise specifically provided for woll (reinforcement cut as required to facilitate demolition including removing debis out side MD land complete all as specified and directed by Engineer-in-Charge.

Material and labour mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge

ditto but 6mm to 8mm dia. As in stirrups, binders, nibs for fencing posts all as specified

M & L for Reinforced cement concrete Nominal mix B1 type 1:2:4 (using 20mm ;graded stone aggregate) as in foundations, including rafts, footings, foundations beam, plinth beam,bases for columns, basement slab, under-reamed piles amd mass concrete and the like etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.

Repairing the damaged concrete portion by average 20 mm thick polymer plaster @ a dose of 5% in ratio 1:3 (C:M) over the exposed non structural member surface including making the surface evenly smooth etc as per manufacturer's instruction. (Measurement on the basis of finished area).

Material and labour for dismantling of rolling shutter of any size and any description including all connected fittings etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour steel rolling shutters 1.25mm thick as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with ball bearing , spring and safety lever four arms locks complete all as specified and as directed by Engineer-in-Charge. Make : M/s Swastik Rolling Shutters, Mumbai / M/s Shree Lakshmi Engg Wks, Bangalore / M/s Senthil Rolling Shutters & Engg Co, Chennai / M/s Jayaraj Industries, Chennai, M/s Prakash &Co New Delhi, M/s darshan Rolling Shutters Nashik, M/s Shalimar Rolling Shutters &CO , M/s Ganesg Rolling Shutters Hyderabad, M/s Shapana Dock & steel

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges all as specified and as directed

Material and labour in repairs for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including distance pieces complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux

Dismantling false ceiling/wall cladding sheets of any description including cover fillets and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed .

Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5mm with 605 x 605mm grid system including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (not less than 20mm wide) or 20mm dia non metallic rigid PVC conduit (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly including cutting chases on wall/floor, making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge for one light point/exhaust fan/wall fan controlled by one switch. Note: Serviceable switch / socket outlet shall be reused. Make: Anchor/havells/finolex ISI mark as approved by GE

All as per item no 67 but one ceiling fan controlled by one way switch and regulator.

All as per item no 67 but for One 3 pin 5/6 Amps switch socket outlet combination point on independent board.

All as per item no 67 but for One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / crabtree / Havells/ Leader

Supply and fix Ceiling rose, 3 phase/pvc/polycarbonate isolated body, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / crabtree / Havells/ Leader

Supply and fix switch socket outlet, combination 5 Pin 5Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / crabtree / Havells/ Leader

Supply and fix switch socket outlet, combination 5 in 1, 3 Pin, 5/15Amps, flush type 240 volts, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / crabtree / Havells/ Leader

Supply and fix stepped type electronic fan regulator 230volts complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / crabtree / Havells/ Leader

Supply and fix, batten type LED tube light fitting, 1x20 watts, 230 volt, 4 feet with long lasting all pre-wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXACP7UN1W020 or equivalent in Bajaj / CG / Phillips model no. BN021LED20S-4ft/ Wipro garnet 20W LED baten 6500K

Supply and fix, surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver of 2 feet 10 watts with necessary electric wiring all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0. 20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXACP7IN1W010 or equivalent in Bajaj / CG / Phillips model no. BN021LED10S-2ft/ Wipro garnet 10W LED batten 6500K

Supply and fix and laying, three core, PVC insulated and unsheathed, unarmoured, 1100 Volt grade cable, 1.5 sqmm with stranded copper conductor cable, drawn through 20 mm dia PVC conduit, medium grade with necessary fixing arrangement from looping box to security light fitting complete all as specified and as directed by Engineer-in-Charge. Note: mode of measurment 3 core cable with PVC counduit shall be measured as one length of connecting all building street lights around the bldgs. Make: Finolex / Plaza / Anchor / Havells / Polycab

Supply and fix in repairs, LED building Security light fittings and commissioning 1 x 45 watts, pressure die cast aluminium housing, heat resistance toughened glass with frame, IP 66 protection, better optics for uniform distribution complete including necessary copper wire connection of suitable size, GI bracket made out of 50mm GI pipe light grade, not less than 1.25m long, ISI marked duly fixed with MS clamps of 3mm thick 02 Nos with nuts bolts etc complete all as specified and as directed by Engineer-in-Charge. Make : Phillips cat no. BRP409 LED060HENRPC S1PSUGR/ Wipro cat no. LR02-501-XXX-57-XX/ Havells cat no. ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC.

S & F LED slim,compact,aluminium die cast edge lit panel, 18 watt recess mounted square fixture with opal diffuser and with seprated electronic driver of same make along with connecting three core cable pvc insulated and pvc sheathered copper flexible cable of size 16/20mm and necessary fixing arrangements srew/fastners etc complete all as specified. Make: Havells OCTANE LED PANEL SQUAREcat no. LHEBHEP7IZ1W018/ Wipro cat no. LD56-251-060-40-xx/ PHILIPS

Supply and fix in repairs surface/recess mounted LED ceiling light fitting, 600mmx600mm 36w, 230v, 50Hz complete with all accessories internally pre wired and including connecting up with twin core twiated flexible copper conductor cable fixed on the false ceilling with neccessory cutting of false ceilling wherever neccessary screwa/fastners etc complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No BOCR2X2R34WLED857SPCMSSL or equivalent in Bajaj / CG / Phillips

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 67,953.00 (Minus) as listed in Schedule of Credit. Tenderer's will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

joshua construction

Vishal Builders

AM ENTERPRISES

mp construction co

Parmatma Enterprises

the bhimani group of companies