Welcome Maint to offr married Accn incl E/M works at Mil Stn Suranussi under AGE(I) Suranussi

Amount

Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed

Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in mass filling and sub base.

Taking down cement plaster on brick/concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete.

M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of alkali primer complete all as specified. (Note- OBD to be done by Roller) Make- (Asian, Berger, nerolac)

M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of alkali primer complete all as specified (Note- CBP to be done by Sprayer) Make- (Asian, Berger, nerolac)

M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified

M&L for preparation of old decorated brick/concrete plastered or unplastered/un-plastered surfaces of walls incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and applying one coat of white (lime) wash complete all as specified. (ht may vary upto 10.00mtr )

All as per item No 12 above but applying one coat of lime white wash on ceiling complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete.

M&L for writing letter of figures (block, Roman,ltalic, or Indian) n. exe 30 cm high (not in index hands/natural size) on buil;ding/ notice boards, including prepration and cleaning etc complete all as specified.

M& L for repair to chajja, facias,balconeis, roof/parapet projections with 15mm thick in cement plaster mortar 1:3 at any height of building including necessary arrangment like scaffolding and safty precautions etc complete all as specified and directed. (Note : Contractor shall be responsible for any accident, mishap, damage to life and material and insurance of workmen etc

M&L for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces in simple complete all as directed

M & L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying applying two coat of oil bound distemper over and including wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed by Engr-in-Charge. Note- OBD to be done by roller. Make- Asian, Berger,Nerolac.

M&L for preparation of old decorated brick/concrete plastered or unplastered/un-plastered surfaces of walls/roof incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and applying one coat of cement base paint (simple/camouglage pattern) complete all as specified and directed (Note- CBP to be done by Sprayer) Make- (Asian, Berger, nerolac)

M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats on new work after applying 2 mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified.

S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed.

Taking down Wooden chowkhats or frames with shutters without taking off shutters from the frame not exceeding 1.5 Sqm each and all as specified and directed by Engineer - in - Charge.

Taking down Wooden chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed.

Taking down shutter of area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed by Engineer - in - Charge .

Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed.

Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note : Glass and Wire gauge shall be measured and paid for separately.

Ditto all as per item No above but with Gauged shutter

M& L for Cutting holes in brick walls built in cement mortar or cement lime mortar exc half brick but not exc one brick th all as specified.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

M & L for PCC 1:3:6 type C-1 with 20 mm aggregate as in door frames for fixing holdfasts and making good to the entire satisfaction of the engineer in charge.

Supply & fixing 35mm thick 2nd class hardwood (factory made) plain framed panelled shutters (two panels) with lock rail and panels of 12 mm thick veneered particle board with commercial veneering on both sides or 9mm thick BWR commercial ply and fixed to chowkat/frame complete. The size of rails and styles of 2nd class hard wood as per IS 1003 (Part-I). Kiln seasoned & chemically pressure treated complete all as specified.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge .

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels commercial face on both faces complete all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint on steel surfaces in simple but except red oxide primer i.e to the already primed steel surface complete all as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm each panes complete all as specified.

S&F MS sliding door bolt ,plate type, 300 mm long stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 Nos of bolts and nuts, four on bolt plate and two on staple plate and all as directed.

S&F MS pressed handle ,oval type,stoved enamelled black 125mm long complete.

S&F MS barell towerbolt, stoved enamelled black, with bright bolt 150mm long complete.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F aluminium anodised tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .

S&F in repairs PVC mirror cabinet (440 x 325 x 120mm) and fixed to wall after taking down old mirror all as specified and directed. (Make : SANYA/JINDAL)

S&F in repairs 19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminated as in cupboard, shelves in kitchen etc complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)

S&F in repair helical door spring 300mm long ordinary rat tail rod pattern including roller and roller plate and welding if reqd complete all as specified

Disconnecting existing water storage tank of any type and capacity exc. 250 ltrs and not exc. 500 ltrs and removing from site complete.

S&F rotational moulded polythene water storage tank, cylindrical vertical with closed top, tripple walled hoisted and fixed in position 500 ltrs capacity complete. Make Syntax/Polycon/Sheetal

Taking down steel water tubing 15mm bore and connections incl cleaning for refixing or removing to store.

–Ditto- but 20mm bore tubing.

S&F tubes medium grade galvanized 15mm bore with all fittings and fixed complete to walls, ceilings or laid in floors etc complete.

-Ditto- but 20mm bore tubing.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. Make : Paryag.

S&F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. Make : Paryag.

S&F in repair stop valves15 mm , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed.(Make- Jaguar, parko , Marc)

-do- but 20 mm dia

S&F in repair pillar taps15mm dia , cast copper alloy , with capstan heads , chromium plated , screwed down high pressure , with long screwed shanks and fly nuts , screwed for iron pipe and all as specified and directed.(Make- Jaguar, parko , Marc)

S&F in repair bib taps , 15mm dia cast copper alloy chromium plated , with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and all as specified and directed.(Make- Jaguar, parko , Marc)

S&F waste coupling of PTMT 32 mm dia half or full threaded for WHB all as specified and directed.

S&F waste coupling of PTMT 40 mm dia half or full threaded for Kitchen Sink all as specified and directed.

S & F in repair Brass chromium plated shower rose 125mm size including fixing to pipe or union with shower arm complete all as specified and directed.(Make- Jaguar, parko , Marc)

S & F corner shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm and all as specified and directed Make : Prayag.

S&F Sinks made of stainless steel 1mm thick kitchen or laborotory with plugs , washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , over all size 495mmx 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.(Make- Prayag, kobra, neelkanth)

All as per item No 75 above but with drainage board and with over all size size 915x 460 mm complete all as specified and directed.(Make- Prayag, Kobra, Neelkanth)

S &F in repairs PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed.

S&F in repair PVC valve less symphonic action type flushing cistern low level white with inlet ball valve float side handle, brackets and PVC connection etc. Complete of 10 ltrs capacity and connection to pipes and fixing of chain ,pull lever ,if any etc all as directed. Make-( parryware, johnson, jaquar)

S&F in repair plastic seat cover white closed pattern with flat bottom and MS chromium plated or aluminum hinges device for EWC complete all as specified.

S&F in repair gratings doom 140mm dia of PTMT (Min wt 50 gms)

S&F in repair grating doom 125mm size with waste hole (Min wt 40 gms).

S&F in repair CP brass jet spray with flexible pipe 1.50 M long fixed for EWC suitable for 15mm bore of pipe complete all as specified

S&F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank complete all as specified (Make : Sintex/Rotex)

S&F in repairs spindle brass for concealed stop cock 15mm bore size complete all as specified

Repair to GI tubing on portion fixed in open or concealed on wall by disconnecting and removing including cutting into walls and replacing with new tubing or new GI fittings if required and refixing in the same position by making connections to the existing pipe15mm bore complete all as specified and directed.

All as per ser item no. 85 above but 20mm bore

Dismantling floor /Wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge (Make- Kajaria, somany, orientbell)

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick in CM 1:4 Complete all as specified directed.(Make- Kajaria, somany, orientbell)

M&L for 25 mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified including Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified.

Disconnecting existing tanks, 250 to 500 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified.

S&F in repairs stainless steel plate rack of size 90 x 80 x 25cm depth size made out of 0.80mm thick sheet complete all as specified. (Make- Prayag, kobra, neelkanth)

S&F in repair brass CP mixer for mixing Hot and Cold water 15 mm bore screwed down for iron pipe and complete all as specified.(Make- Jaguar, parko , Marc)

S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified

S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed (Make- Cera, Jaguar, Parryware.)

Supply and fix in repairs for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. (Make- Cera, Jaguar, Parryware.)

S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.(Make- Cera, Jaguar, Parryware.)

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

Taking down carefully aluminum point wiring on TW Batten/in conduit / with conduit (light/Fan/socket or power) complete and making good the disturbed surfaces of wall/ceiling etc including taking down fittings such as switches, ceiling roses, pendants, Regulators, sockets, light fittings etc and removing material from site except tube light fittings, fans etc which shall be re-used in work complete all as directed .

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including metal flush mounting box (sunk in wall) for suitable of modules with module inner sheet cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a ) All as per ser item 2 above but for 3 pin socket out let 5 Amps on independent board

(b) All as per ser item 2 above but for 3 pin socket out let 5 Amps on same board

All as per srl item No 2 above but for 3 pin socket outlet 15 Amps with 2.5 Sqmm stranded copper conductor PVC unsheathed cable independent including PVC cable copper conductor 2.5 Sqmm with green insulator as earth wire with cast iron/pressed steel terminal box all as specified.

S&F modular switch 6 amp 230 V AC one way, one module complete all as specified

S&F modular switch 20 amp 230 V AC one way, with indicator one module complete all as specified

S&F Modualr Socket 6A, 2/3 pin two module combined complete all as specified.

S&F Modular socket , 6A/16A, 2/3 pin, two module complete all as specified.

S&F modular fan regulator step type, 120W, 2 module complete all as specified

Suply and fix white colour plates with frame for modular switch of 01 module complete all as specified

Suply and fix white colour plates with frame for modular switch of 03 module complete all as specified

Suply and fix white colour plates with frame for modular switch of 04 module complete all as specified

Suply and fix white colour plates with frame for modular switch of 06 module complete all as specified

Suply and fix white colour plates with frame for modular switch of 08 module complete all as specified

Supply and fixing ceiling rose surface bakelite 65 x 50mm three terminals complete all as specified. Make : Havells/SSK/Leader

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make : Crompton Greaves/Philips/Bajaj/Wipro

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make : Crompton Greaves/Philips/Bajaj/Wipro

Supply and fixLED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make : Crompton Greaves/Philips/Bajaj/Wipro

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified. Make : Crompton Greaves/Philips/Bajaj/Wipro

Supply and fixing Isolator SP 6 to 40 Amps 240 Volts complete all as specified. Make : Standard/Ship/Havell’s.

Supply and fixing Isolator SPN 240V, 40 Amp complete all as specified. Make : Standard/Ship/Havell’s.

Supply and fixing Isolater 63 Amps TPN 415 Volts complete all as specified. Make : Standard/Ship/Havell’s.

Supply and fixing sheet steel enclosure with double door, detachable gland plates flush/surface mounting for MCB’s fitted with bus bar, earth bar and neutral link 8 ways SPN 240 V Make : Standard/Havells/Ship

Supply and fixing sheet steel metal enclosure (DB) triple pole and neutral 4 way 415 ,Volt with 200 amps rated bus bar complete all as specified. Make : Standard/Havells/Ship

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB 20 Amp complete all as specified Make : Standard/Havells/Ship

Material and Labour for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified . Note : Two run of 6.00 Sqmm cable one run of 4.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit

Material and Labour for replacement of earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia light grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed.

DUGGAL CONSTRUCTION CO

AAY KAY Constructions