Tender ID

West Bengal

To Be Opened

Works

Miscellaneous Works

Block repair and painting of LCT vessel MV Bulbul of WBSTC at SWL yard

THE SHALIMAR WORKS (1980) LIMITED

Howrah, West Bengal

Amount: ₹71 LCloses: 15 May 2026Closed

Timeline

Published8 May 2026
Closed15 May 2026
Bid Opening15 May 2026

Corrigenda

Corrigendum

1 updatesLatest on 11 May 2026

Tender Value

₹71 L

EMD Value

₹1.4 L

Closing Date

15 May 2026, 12:00 pmClosed

Tender Inviting Organisation

Name

General Manager

Address

HRBC Office Compound, Canteen Building, 1st Floor, Munshi Premchand Sarani, Kolkata 700021

Work Description

Block repair and painting of LCT vessel MV Bulbul of WBSTC at SWL yard (Length- 27.5 M, Breadth- 8.50 M, Depth- 2.70 M)

Tender Information

Tender ID

2026_TSWL_1022600_2

Reference Number

SWL-eTENDER/54 (2025)/890

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

120 days

Location

Howrah

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Technical Proposal

RequiredScanned copy of the proof of payment of Tender cost (.pdf)

RequiredScanned copy of the proof of payment of EMD (.pdf)

RequiredSelf-attested NIeT including all sections and Corrigendum, if any issued by SWL (.pdf)

RequiredScanned copy of other important documents (OID) mentioned under Para(3)(a)(iv) of ITB (.pdf)

Financial Proposal

RequiredBOQ (Bill of Quantity) (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,500

Tender Fee Payable To

The Shalimar Works (1980) Limited

EMD Fee Amount

₹1.4 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

8 May 2026

Published

8 May 2026

Bid Opening

15 May 2026

Download Starts

8 May 2026

Download Ends

15 May 2026

Submission Starts

8 May 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (55 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Vessel to be blocked and unblocked.	-	Job	-	-
2	Ultrasonic gauging to be done only on the underwater portion of hull plate and bottom plate.	-	Points	-	-
3	Corroded, holed & thinned down plates, structural members, railing posts etc. to be cropped & renewed – Deck- 22 MT Bottom- 11 MT Side hull- 4.5 MT Transom- 2.5 MT Ramp- 7.5 MT Inside stiffening members- 3 MT Deck fitting i.e. Ramp and Anchor winch bases, ventilation cowl, cabin wall, cropping and renewal of damaged portion of ramp posts- 5 MT Engine room floor plate including securing arrangement- 3 MT	-	MT	-	-
4	Corroded and thin down railing pipe (25 NB) to be renewed.	-	Mtr.	-	-
5	Steel fender 200 NB, 8 MM thick half cut pipe stiffened with ‘D’ shaped stiffeners 500 MM apart.	-	Mtr.	-	-
6	Renewal of twin bollards including doubler plate (200NB pipe-Height-500 MM).	-	Nos.	-	-
7	Renewal of single bollards.	-	Nos.	-	-
8	Anode to be fitted on under water hull plate.	-	Nos.	-	-
9	Main engine (Kirloskar-6R1080TA) to be full overhauled (supply of engine spar and machine shop jobs will be done by WBSTC/SWL).	-	Nos.	-	-
10	Both side 4 Cylinder DG engine to be full overhauled (supply of engine spar and machine shop jobs will be done by WBSTC/SWL).	-	Nos.	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 10.60 MB

Work Item Documents

BOQ_2516210.xls

BOQ • 0.43 MB

Corrigendum Documents

Corrigendum_I_Technical_2ndCall__890.pdf

PDF • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Vessel to be blocked and unblocked.

Job

Ultrasonic gauging to be done only on the underwater portion of hull plate and bottom plate.

Points

Corroded, holed & thinned down plates, structural members, railing posts etc. to be cropped & renewed – Deck- 22 MT Bottom- 11 MT Side hull- 4.5 MT Transom- 2.5 MT Ramp- 7.5 MT Inside stiffening members- 3 MT Deck fitting i.e. Ramp and Anchor winch bases, ventilation cowl, cabin wall, cropping and renewal of damaged portion of ramp posts- 5 MT Engine room floor plate including securing arrangement- 3 MT

Corroded and thin down railing pipe (25 NB) to be renewed.

Mtr.

Steel fender 200 NB, 8 MM thick half cut pipe stiffened with ‘D’ shaped stiffeners 500 MM apart.

Mtr.

Renewal of twin bollards including doubler plate (200NB pipe-Height-500 MM).

Nos.

Renewal of single bollards.

Nos.

Anode to be fitted on under water hull plate.

Nos.

Main engine (Kirloskar-6R1080TA) to be full overhauled (supply of engine spar and machine shop jobs will be done by WBSTC/SWL).

Nos.

Both side 4 Cylinder DG engine to be full overhauled (supply of engine spar and machine shop jobs will be done by WBSTC/SWL).

Nos.