Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical 1 102 UNION OFFICE ROAD VEPPUR POST KUNNAM TALUK PERAMBALUR 621 717 | PERAMBALUR | PERAMBALUR | TAMIL NADU | 621717 | - | Rejected-Technical Rejected |
Tender Value
₹33 L
EMD Value
₹33,000
Closing Date
20 Apr 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE/GCC-I/CNI
230KV GIS SS Complex, A-10, Thiru-Vi-Ka Industrial Estate, Guindy, Chennai-32
as per NIT
2023_EB_301925_1
OT-002/23-24 of SE/GCC-I/CNI
Open Tender
Civil Works
Works
120 days
Nemmeli
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹33,000
Yes
21 Sept 2023
13 Apr 2023
21 Apr 2023
13 Apr 2023
20 Apr 2023
13 Apr 2023
Amount
Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Hard gravelly soil, stiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., complete including cost of all materials lead lift etc complete as directed by the department engineer at site.
Providing and laying Sand filling for foundation including cost of labour, transport, consolidation, lead and lift etc., complete as per standerd specification and as directed by the department at site.
Plain Cement Concrete 1:3:6 using 40 mm HBG stone for foundation including cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site .
R.C.C. 1:1.5:3 using 12- 20mm metal for Raft, grad beam with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.
R.C.C. 1:1.5:3 using 12- 20mm metal for coloumn with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.
R.C.C. 1:1.5:3 using 12- 20mm metal for Plinth beam with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.
R.C.C. 1:1.5:3 using 12- 20mm metal for Lintel cum sun shade beam with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.
R.C.C. 1:1.5:3 using 12- 20mm metal for Roof beam with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.
R.C.C. 1:1.5:3 using 12- 20mm metal for Roof slab with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.
Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site.
Brick work in C M 1:5 using good quality secound class chamber burnt bricks for foundation and basement including cost of all materials labour, lead & lift etc., complete as directed by the department engineer at site.
Brick work in C M 1:5 using good quality secound class chamber burnt bricks for walls in superstructure including cost of all materials labour, lead & lift etc., complete as directed by the department engineer at site.
Providing antitermite treatment around the building and foundation as per IS 6313 including cost of all materials labour, lead & lift etc., complete as directed by the department engineer at site.
Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site .
Providing weathering course consisting of one course of pressed tiles of size 200x200mm size approved make and quality in cement motor (1:3) 20mm thick and mixed with crude oil 10% by weight of cement and pointing the tiles with same oiled motar over a bed of brick jelly lime concrete (20mm size brick jelly) and mixed in proportion 12:32.5, 80mm thick, slop 1 in 60 including cost of all materials, cement, labour, curing, lead, lifts etc., complete as directed by the department at site.
Supplying and fixing grills for windows, collapsible gate etc., as per design, specification with painting one coat of red oxide over with one coat of enamel paint including cost of materials, labour, lead and lift etc., complete as directed by the department engineer at stie.
Painting the walls with emulsion paint two coat over one coat primer including coat of all materials, scoffolding, labour with all lead, lift etc., complete as per specification and as directed and approved by the dept engineer at site
Painting the new iron work with two coats of enamel paint over red oxide including coat of all materials, scoffolding, labour with all lead, lift etc., complete as per specification and as directed and approved by the dept engineer at site
Supplying fabrication and fixing in position of anodised aluminium door of various size in accordance with ISI 1868 / 1962 for T bottom gutter arrangement so as to drain the water entry and extended ano. Alu section of bottom track of size 100x45mm with gutter arrangements shutter / plain top & bottom section of size 45x45mmx2mm plain frame 63x38.4mm switch lock special U rubber L angle alu.clip 17.15 x 17.27 x 1.5mm thick at 0.118Kg/m screws and fixing 5mm fristed glass, providing floor gear, all materials, lead lift transportation , labour for fabricating and fixing in position including drilling holes in RCC / brick work with electric power driller etc. complete.
Supplying , fabricating and fixing in position of Anodized Aluminium window natural colour sliding type with locking arrangements in accordance with ISI 1868 / 1962 T bottom gutter arrangements so as to drain the water entry and extended Aluminium section of bottom track of size 62x37mm with gutter arrangements for shutter / plain top & bottom section of size 40x18mm at 0.38Kg/m plain side vertical section of size 40x18mm at 0.63Kg / m ventilator bore frame 63x37 at 0.85Kg/m switch lock special U rubber, L angle aluminium clip 17.15 x 17.27 x 1.5mm thick 0.118Kg/m screw and fixing 4mm thick frosted glass of all materials, load , lift, labour for fabricating and fixing in position including drilling holes in RCC work / brick work with electric power driller to the required extent and made to the original after fixing etc., the Aluminium frame is to be anodized with matt finish under the electrically controlled condition
Supply & wiring with 2.5 sq.mm PVC unsheathed Al. SC cable in suitable PVC rigid pipe for water tight bulk head fitting buzzer (Without celling rose) with TW box for switches and joint boxes, switch box only in flush with wall and covered by HYLUM sheet of 5mm thick with painting and supplying and fixing 5 Amps switch including cost of all mateials, lead, lift, continous earth connection by 14 SWG TC wire etc. Complete as per standard specification and as directed by the department engineer at site.
Supply & wiring with 2.5 sq.mm PVC unsheathed Al. SC cable in suitable PVC rigid pipe for LED lamp with celling rose with TW box for switches and joint boxes, switch box only in flush with wall and covered by HYLUM sheet of 5mm thick with painting and supplying and fixing 5 Amps switch including cost of all mateials, lead, lift, continous earth connection by 14 SWG TC wire etc. Complete as per standard specification and as directed by the department engineer at site.
Supply & wiring with 2.5 sq.mm PVC unsheathed Al. SC cable in suitable PVC rigid pipe for Tube light with celling rose with TW box for switches and joint boxes, switch box only in flush with wall and covered by HYLUM sheet of 5mm thick with painting and supplying and fixing 5 Amps switch including cost of all mateials, lead, lift, continous earth connection by 14 SWG TC wire etc. Complete as per standard specification and as directed by the department engineer at site.
Supply & wiring with 2.5 sq.mm PVC unsheathed Al. SC cable in suitable PVC rigid pipe by 5 Amps, 3 pin cum 2 pin plug on suitable TW box for plugs and box only in flush with wall and covered by HYLUM sheet of 5mm thick with painting and supplying and fixing 5 Amps switch including cost of all mateials, lead, lift, continous earth connection by 14 SWG TC wire etc. Complete as per standard specification and as directed by the department engineer at site.
Supply & wiring with 2.5 sq.mm PVC unsheathed Al. SC cable in suitable PVC rigid pipe for Fan with celling rose with TW box for switches and joint boxes, switch box only in flush with wall and covered by HYLUM sheet of 5mm thick with painting and supplying and fixing 5 Amps switch including cost of all mateials, lead, lift, continous earth connection by 14 SWG TC wire etc. Complete as per standard specification and as directed by the department engineer at site.
Supplying and fixing of 4’ 40W single LED tube light and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete as directed by the department engineer at site.
Supply and fixing of water tight bulk head fitting with guard suitable for LED bulb including cost of all materials, labour lead, lift etc., complete
Supplying and fixing 15 Amps DPIC switch as per ISI 4 way distribution board with phase and neutral link with teak wood box 12"x8"x4" providing earthing to main with 4 SWG copper wire and 6'-0 long 12/4" GI pipe earth pit shall be filled with charcoal and salt as pre PWD standard data including cost of all materials, labour lead, lift etc., complete as per standard specification and as directed by the department engineer at site.
Providing and fixing of overload and shot safe trip circuit protector (Earth leakage circuit breaker) English Electric make as pre ISI with all accessories and fittings with necessary T.W. Board and proper connection in the main switch including cost of all materials, labour lead, lift etc., complete as per standard specification and as directed by the department engineer at site.
Supplying and fixing of slanding holder with LED Bulb with ISI approved quality including cost of all materials, labour lead, lift etc., complete
Laying in position of Glazed colour vitrified flooring design tiles 0.60x0.60 mm (Naveen, Johnson, bell make) in CM 1:3 in pointed with same colour cement including cost of all materials, labour, lead and lifts etc., complete as directed by the department at site.
Supplying and fixing of 110mm dia PVC down fall pipe of approved quality with the bottom clamps shoes, bend coupling etc., including cost of all materials,labour,lead,lift, for fixing in position etc., and jointing of properly and making holes in masonry on concrete and restoring the attended surface to original condition complete as directed by the department at site.
Labour charges for refilling with excavated earth other than sand including cost of labour, transport, consolidation, lead and lift etc., complete as directed by the department engineer at site.
Labour charges for removal of excess earth including cost of labour, transport, consolidation, lead and lift etc., complete as directed by the department engineer at site.
Supplying and Filling with well gravel including cost of all materials, transport, leads, lift, labour etc., complete as directed by the department engineer at site.
Supply and fixing of 1400 mm (56") sweeping AC ceiling fan with all accessories and stepped electronic 300 watts regulator with 300 mm (1') down road in the existing clamp including cost of all materials, lead, lift, etc., complete - (SD - 107)
Supply and fixing of split Air Conditioner (3 Phase-2 Ton capacity) of approved make (Dikin or equivalent) with all accessories including stabilized (V guard) with reputed make including cost of all materials, lead, lift, etc., complete as per standard specification and as directed by the department engineer at site.
Suppling and fixing of 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, etc., complete as per standard specification and as directed by the department engineer at site.
Suppling and laying 25mm dia 10 Kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, etc., complete as per standard specification and as directed by the department engineer at site.
Drilling 41/2" dia hole in brick wall and fixing suitable size PVC pipe in all for providing cable for outdoor condencing unit including cost of all materials, lead, lift, etc., complete as per standard specification and as directed by the department engineer at site.
Wiring with 2 x 4 SQ mm(56/0.3) PVC unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm TW switch box in flush with wall with 3 mm thick hylem sheet cover for 15 A 3 pin flush type non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point including cost of all mateials, lead, lift, etc., complete (SD - 40 )
supply, fabrication, cutting and fixing in position of MS chequared plate 10mm thick with lifting hooks / holes and placing over cable duct inside control room building, painting with one coat red oxide, two coats enamul paint, labour for laying, transport, T & P including cost of all materials, labour, leads, lift, cutting, grinding, painting, placing in position etc., complete as directed by the department engineer at site.
Supplying, cutting and labour charges for fixing in position of MS Channels ISJC 150 for cable duct including cost of all materials, labour, leads, lift, cutting, placing in position etc., complete as directed by the department engineer at site.
Dismantling the eixisting brick wall including cost of all materials, lead, lift, etc., complete as per standard specification and as directed by the department engineer at site.
Supply and installing metal false ceiling using fire retardant galvanized stell sheet plin lay in the size of 600mm x 600mm, 0.5mm thick including cost of all materials, lead, lift, etc., complete as per standard specification and as directed by the department engineer at site.
GST for bidders within TamilNadu
GST for bidders outside TamilNadu (IGST)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .