ADDITION/ALTERATION TO HR BRANCH AT SHALATENG GARRISON UNDER AGE (I) CIF (K).

Amount

B/R items Supply only liquid water proofing compound as per latest IS specifications all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete, all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified.

Rolled mild steel work in main and cross beams, hip and jack rafters; purlins where connected to comman rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed.

Plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc. conforming to Fe-410- W (Gde- E-250) quality B, complete all as specified.

Rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed.

Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia, 40mm long complete all as specified and as directed.

1mm thick plain, black, mild steel sheeting, as in eaves boarding etc. complete fixed with welded or soldered jointed, complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges vally gutter ect. fixed with self tapping screws complete all as specified.

605 x 605 x 8mm thick Gypsum tiles, moisture resistant, micro look edge inserted to GI/aluminium framework complete all as specified.

09mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed between aluminium section with and including snap beading of aluminium of standard section with rubber gasket, complete all as specified and directed.

18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination as in cabinet for stoage of files etc, complete all as specified and directed.

75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and fair without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete, all as specified and directed.

75 mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor, etc finished even and fair without using extra cement ,complete all as specified.

25 mm thick plain cement concrete 1:2:4 , type B-0 (using 12.5 mm graded crushe stone aggregate) as in floor to receive the tiles/floor finishes rough finished complete all as specified.

Screed bed or bedding layer of cement mortar 1:4, 15mm thick for laying floor finishes, complete all as specified.

Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat for dado/skirting etc complete all as specified and as directed.

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer's instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid for separately under relevent item.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

Preparation of new plastered surfaces of wall with 3mm thick layer of wall care putty and applying two coats of oil emulsion distemper over a coat of suitable primer, complete all as specified.

Taking down cement plaster, of any description on brick or stone or cement concrete walls/ceiling including raking out joints, hacking for key, scrubbing down with water complete all as specified.

Preparation of new plastered or concrete surfaces of walls and applying two coats of cement base paint over a coat of suitable primer, complete all as specified.

4mm thick sheet glass (Tinted) of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

5.50 mm thick sheet glass (Tinted) of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

Preparation of new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Demolition of cement concrete (unreinforced) of any description in any position not otherwise specifically provided for, complete all as specified.

Dismantling timber scantling 40 Sq cm and over in section in any position, framed work, complete all as specified and directed by Engr-in-Charge.

Dismantling boarding of any description, fixed in any position with screws including, complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified.

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

Anodised aluminium powder coated (Thickness of powder coating not less than 50 microns) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Anodised aluminium powder coated (Thickness of powder coating not less than 50 microns) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 No's in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified.

Anodised powder coated of any colour for partitions, aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

E/M items Point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts grade and including PVC casing caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet concealed in wall or on surface as per site requirement and making good disturbed surface of wall ,covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point/fan point/exhaust fan etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No 40.00 above, but for one 3 pin socket outlet 5 Amp on the independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No 40.00 above, but for one 3 pin socket outlet 5 Amp on the same board with other switches, complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No 40.00 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Sheet metal enclosure double door shutter type for DB’s SPN, 240 Volts Single Pole and Neutral 08 way with 200 Amps rated bus bar complete all as specified and as directed by the Engr-in-charge.

MCB SPN 32 Amps, 240 Volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

MCB single pole 6 to 32 Amps, 240 volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Switch piano flush button single pole one way 5 Amps, complete all as specified.

Socket outlet multipurpose 2 in 1, 3 pin, 5 Amp flush type, complete all as specified.

Switch piano flush button single pole one way 15 Amps, complete all as specified.

Switch socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, complete all as specified.

Ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engineer-in-Charge.

LED Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use 20 watt LED 6000K with LED tube light and connecting using suitable wire complete, all as specified and as directed at site. Make :- Havells Cat Part No.LHEXBLP7PN1W020 or equivalent in Bajaj/Crompton/Phillips/Wipro/Syska.

36 Watt LED Light fitting 2ft x 2ft recess mounting ceiling light fitting flush to ceiling Aura I pairs super bright LED's with highly efficient light-smoothing optics to deliver superior illumination and energy savings year after year with LED tube light and connecting using suitable wire complete all as specified and directed. Make : Havells Cat Part No.LHECDIL7PP1W036/Crompton Cat Part No.LCPL-36-CDL(2X2) or equivalent in Wipro/Syska/Bajaj/Philips.

Sub main wiring using two single core PVC insulated and unsheathed cable with 6 Sqmm FRLS, multistrand copper conductor drawing in casing caping, with 2.5 Sqmm PVC unsheathed copper conductor cable multistrand as in earth wire system, complete all as specified and as directed. Note :- Two runs of 6 sqmm cable, one run of cable 2.5 sqmm and one run of PVC caping/caping shall be considered as one unit.

Exhaust fan 250mm sweep single phase AC 220 Volts, 50Hz supply PVC body with louvers and connecting including provn of 3 core flexible PVC insulated multi stranded copper conductor of size 0.50 Sqmm from ceiling rose/connector to fan, MS fixing brackets and other misc items required for fixing, complete all specified and as directed by the Engineer-in-Charge.

Ceiling fan 1200mm sweep electric driven single phase 240 Volts, 50 Hz complete with blades and electronic regulator complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing and commissioning of split type Air conditioner of capacity 2 Ton with 5 star rating suitable for hot and cold system complete with all accessories, all as specified and directed. Make :- LG/Voltas/Hitachi/Carrier/Diakin.

Supply and installation wall mounted, indoor type electronic solid state automatic voltage stabilizer of 5 KVA suitable for Air conditioner, single phase input and out put range 120 Volt to 260 Volts and out put stabilized to 220 volt ± 5 Volts, with time delay relay of 180 second. The unit shall be provided with five status indicators i.e Input, delay, LV cut, HV cut and Out Put, voltmeter and Ampere meter, all as specified and directed. Make :- V-Guard/Microtek/Vinitec/Sinetrac

Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of capacity 32 amps complete all as specified.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as continuous earth wire, drawn through and including PVC concealed conduit and connected to main board and making good disturbed surface complete all as specified and as directed. Note: Two runs each of one RM of 6.00 sqmm main cable and one RM of 4.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Mild steel bracket factory made including fixing on wall, tightening with suitable size of nuts and bolts, complete all as specifed.

Route pipe (copper tube) of size 7/8" dia complete with insulation all as specified and directed.

PVC water drainage pipe of size 15mm complete all as specified and directed.

M/S Nazir Enterprises

M/S A.M.Enterprises