REPAIR MAINT OF LED LIGHT FITTING AND REPAIR REPLACEMENT OF OLD UNSV CONVENTIONAL LIGHT FITTING WITH LED LIGHT FITTING AND ALLIED WORKS UNDER GE (WEST) JABALPUR

Amount

Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.

S&F switch piano flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified & directed.

S& F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings.

S&F Ceiling rose surface type 60x30 mm three terminals of polycarbonate body complete all as specified & directed.

Supply & Fixing in repairs Smart bright Batten Series, LED luminaire using LEDs 18 watt THD<10 %, CRI>80 %with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Havells Cat part no : LUMILINE+ BS18WLED865SPCSS SI or equivalent Philips /Luker/Wipro/Halonix

Supply & Fixing in repairs Smart bright Batten Series, LED luminaire using LEDs 20 watt THD<10 % ,CRI>80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Make : Havells Cat part no:LUMILINE+BS20WLED865SPCSS SI or equivalent Philips/Luker/Wipro/Halonix

Supply & Fixing in repairs Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt THD<10 %,CRI>80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Make : Philips Cat part BN 021 LED 22S 6500/4000 PSU GR SI or equivalent havells/Luker/Jaquar/Halonix

S & F in repairs LED Mirror light fitting 2 ft TL 5 12 watt complete with fixing arrangements on wall all as specified and directed.Make- PHILIPS Cat part no:BN 021 LED 12S 6500/4000 PSU GR SI or equivalent Bajaj/Havells/Halonix

S & F in repairs recess mounted adjustable LED downlighter not less than 4watt 400 lm, 3000K/6500K complete all as specified and as directed.Make- PHILIPS Cat part no:LED SPOT GU10 4.6 W or equivalent /BAJAJ/Havells/Halonix

S&F in repairs decorative wall light fitting made up of Polycarbonate ,Cylindrical shape ,with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. Make: CITY 1 OF HAVELLS or equivalent in Bajaj/Philips/Halonix

S&F in repairs Bulk head endura LED light fitting complete 10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size and accessories & length complete all as specified & directed. Make :Havells Cat Part No. RUGBY NEONFT10WLED760SSYMBOPC or Equivalent make Philips / LUKER/Halonix

S&F LED in repairs light fitting square 57x57 CM Not less than 40 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in Havells/Luker/Halonix

Supply & fix in repairs replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,with IP-66 protection and impact resistance IK08,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make: Havells cat part no:ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent in philips or LUKER/Halonix

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into and concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge for one light point/fan point/bell point controlled by one switch.

Ditto all as per above items but controlled by two way switch.

M&L for drawing the wire in with casing caping complete with point wiring with FRLSH PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover or inner outer plates for modular switches with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed all as specified & directed by Engineer-in-charge for one light point/fan point/bell point controlled by one switch.

Ditto all as per above items but controlled by two way switch.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.Make: Legrand cat no :5078 11 or eq in SEIMENS /GE/Havells

S&F switch piano type switch two way AC 230 volts 6 Amps as per on existing switch board .

S&F in replacement PVC casing caping 25mm as required at site complete with fixing nails and making good the disturbed surfaces etc complete all as specified.

S&F in replacement PVC conduit 25mm medium grade as required at site for passing through submains complete with all fittings such as tee, bends,elbow, saddle etc and making good the disturbed surfaces etc (Cutting , chasing,finishing shall be included in this Item complete all as specified.

S&F in replacement of frame plate for modular switch 3/4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 6/8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement insulation deteriorated PVC insulated flexible copper conductor cable twin twisted of Size 24/0.20mm 1100 volts grade complete all as specified and as directed.

S&F in replacement MS Housing box 3/4 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement ceiling fan regulator, electronic Socket type, single phase, 230 volts complete all as specified and as directed.

S&F in replacement MS sunken box suitable for switches/ Socket/ FR as per existing site switch box and making good to the disturb surface by PCC complete all as specified and as directed.

S&F in replacement MS Housing box 5/6 module suitable for modular switch as per switch box and making good to the disturb surface by pcc complete all as specified and as directed.

S&F in replacement of modular switch 6-10 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular socket, 6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed.

S&F in replacement of modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed .

S&F in replacement modular fan regulator, 2 Module 4 step 180w heavy duty 230 volts as per existing model/make complete all as specified and as directed.

S&F in replacement of 3mm thick hylam sheet of any size including brass screws and washers etc as per required at site complete all as specified and as directed.

S&F in replacement modular bell push switch piano, flush type, 6 Amps complete all as specified and as directed.

S&F in replacement of 12 Watt ROUND recess mounted down lighter separate replaceable electronic driver celling cut out dia 160 mm height 16mm round shaped polycarbonate fixture complete all as specified and directed, Make : Havells Cat Part No 12W LED EDGEPRORDDLR12WLED857S or equivalent in PHILIPS /Luker/Halonix

S&F in repairs LED Bulb 230V AC 9/10 watt cool day light 6500K having maximum height 1020 mm heavy duty complere all as specified and directed by Engineer-in -charge. Make :- Havells/Philips/Bajaj/Halonix

S&F in repairs LED Bulb 230V AC 12watt cool day light 6500K having maximum height 1020 mm heavy duty complere all as specified and directed by Engineer-in -charge. Make :- Havells/Philips/wipro/Halonix

S&F in repairs LED Bulb 230V AC 7 watt cool day light 6500K having maximum height 1020 mm heavy duty complere all as specified and directed by Engineer-in -charge. Make :- Havells/Philips/Wipro/Halonix

Supply & Fixing in repairs RCBO four Pole 240Volt, 63 Amp,100 MA protection for earth over load and short circuit complete all as specified & directed. Make : Legrand 411374 / Siemens / GE/Havells

S&F in replacement of single core wire 10 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed Make :- Anchor/Havells/ polycab/ plaza

S&F in replacement of single core wire 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Anchor/Havells/ polycab/ plaza

S&F in replacement of single core wire 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Anchor/Havells/ polycab/ plaza

S&F in replacement of single core wire 1.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Anchor/Havells/ polycab/ plaza

Supply & fixing in replacement of integral post top lantern complete with black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories and suitable for LED min 15Watt lamp complete all as specified and directed . Havells cat part No RUBYMINIPT15WLED757PSYMTOPC or equivalent make of Bajaj/C&S/Halonix

S&F in replacement of sheet steel enclouser distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.Make of Distribution Board Legrand cat no:5077 50 or equivalent in seimens /GE and Make of MCBs :Legrand/Seimens/GE/Havells

S&F in repairs Recess/ Surface mounted IP20 PIR movement detector with a built-in switch for lighting. It should be able to take lighting load of 6A. It should control office area of around 20sq.mtr for small movement and 50sq.mtr for large movements. It should have smart daylight sensing for additional savings through daylight override and daylight switching. It should have timer knob (1 to 30 min setting) and light detection knob (100 to 1500 Lux setting) on the bottom face for ease of controlling after installation as well. Smart timer should extend the delay time by 10 mins if movement is detected shortly after switch-off. It should have a retractable shield. Operating temperature +5 to +50 Degree Celsius. It should have EMC compliance IEC (EN) 60669-2-1, Immunity IEC (EN) 61547 And Immunity IEC (EN) 55015 & IEC (EN) 55022, Class B. Max power consumption of 1.2W at standby. Make Philips LRM1071 or Bajaj/ Crompton

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm graded crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete. Note:- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

Supply & Fixing in repairs RCBO double Pole 240Volt, 32 Amp,100 MA protection for earth over load and short circuit complete all as specified & directed. Make : Legrand 411333 / Siemens / GE/Havells

ELCON

Sachdeva Enterprises

RAVI TEJ BUILDERS

kiran electrical and hardware centre

RAINA SALES AND SERVICES

mandeka constructions

S K TRADERS