REPAIR / MAINT TO DOOR, WINDOW, PLASTER, ROOF TREATMENT AND FLOORING AT DEMO BN AND DEMO BTY AND OTHER OTM ACCN UNDER AGE B/R IV OF GE (AWC) MHOW.

Amount

M & L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer including complete removal of existing treatment all as specified and directed complete . Note:- (i) Surface prepration like opening the cracks / removal of loose concerete. (ii) Pressure washing the entire roof to remove dirt , dust algae fungi or other contaminants from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores, capillaries and micro cracks. (iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of dr fixit URP (vii) First and Second coat of elastomeric dr fixit Roof Seal . The authorized applicators are as under:- (i) P Tech Solutions 92 Anurag Nagar Ring Road Indore (II) MR clean Ventures E-4/402 Arera Colony Bhopal 462016 (iii) Property care, 244 D scheme No 71 Near Shriji Vatika indore 452002 Note : A warranty of 10 years be provided by the contractor for the service rendered.

S&F 500 Ltrs capacity 3 layer rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position including taking down, all as specified in SSR part I- complete.

S&F 1000 Ltrs capacity Triple layer rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position including taking down, all as specified in SSR part I complete.

S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed.

Supplying, fixing, jointing and testing 15mm bore galvanised steel water tube medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, including taking up or down of existing steel tubing and connection, complete all as specified and directed.

Description same as per item no. 05.00 but 20 mm bore, complete all as specified and directed.

Description same as per item no. 05.00 but 25 mm bore, complete all as specified and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses, complete all as specified and directed.

M & L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors/skirting etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

M & L glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L for vitrified cerameic tiles 9 to10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:4, complete all as specified and directed.

S & F Solid PVC Wall/ ceiling Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including taking down as per specifications and drawing all as specified.

S&F in repair PVC waste pipe fixed to any type of coupling of 32 mm threaded, complete all as specified and directed.

S & F in repair vitreous china Urinal , Half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE, complete all as specified and directed.

M & L 22 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing, complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per item No 17.00 above but as in skirting or vertical surfaces over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each, complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame), complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast / lugs, filling hollow space of pressed steel door frame etc including necessary form and including demolition of existing PCC work all complete as specified and as directed.

M & L 2nd class hard wood 35 mm thick Plain , framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats, complete all as speciifed and directed.

S & F 2nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as in windows and ventilators as specified in SSR Part-I, section 8, clause 8.24 (b) fitted to chowkats, complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats, complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F of 2nd class hard wood plain solid straight chowkhats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

Supply only 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane, complete all as specified and directed. Note :- Fixing charge is included in window/door shutter items considered therein.

Supply only stainless steel wire cloth, 0.56mm conforming to IS nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc, complete all as specified and directed. Note :- Fixing charge is included in window/door shutter items considered therein.

Taking down door/Window/ventilator wooden / steel shutter from frame exc 1 Sqm but not exc 2 Sqm each and refixing the shutter in the same opening after easing and adjusting, complete all as specified and directed.

Taking down door/Window/ventilator wooden / steel shutter from frame n exc 1 Sqm each and refixing the shutter in the same opening after easing and adjusting, complete all as specified and directed.

S&F in repairs steel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded, etc complete all as specified and as directed.

S&F in repair steel window with side hung shutter including projecting hinge, fixing lugs, steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and as directed

S&F in repair steel ventilators with Top hung shutter including projecting hinge, fixing lugs, steel handle and steel peg stay, complete all as specified and as directed

S & F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company , having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/ borer proof , water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length , all as per specifications drawings as directed by the Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company including hold fast or fasteners, complete all as specified and as directed.

S & F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company , having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free , water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws , all as per direction of Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and as directed.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , complete all as specified and as directed.

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and as directed.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and as directed.

S & F 150 mm size aluminium handles cast type, anodised ISI marked, complete all as specified and as directed.

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and as directed.

S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good, complete all as specified and as directed.

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor, complete all as specified and as directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1:3 even and smooth complete etc. shifting of existing cooler stand where required, complete all as specified and as directed. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth, complete all as specified and as directed.

S & F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed. (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter.

Dismantling timber scantlings unframed of any section , in any position, complete all as specified and as directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer, complete all as specifed and directed.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads, complete all as specifed and directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane, complete all as specifed and directed.

M & L for 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane, complete all as specifed and directed.

S & F in repairs stainless steel wire cloth, 0.56mm conforming to I S nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

Demolition of Brick work built in cement mortar including all quoins arches pillars etc, complete all as specifed and directed.

M&L Brick work with sub class 'B' modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specifed and directed.

M & L for reparing of RCC projection, chajjas, roofs, facia, colum etc by necessary preparation i.e scrapping, cutting, chiseling, derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : - Cost of formwork shall be deemed to be included.

M&L for rendering in cement mortar (1:6) 10mm thick first coat on fair faces of brick walls or concrete surfacesand in cm 1:4 and 5mm thick second coat over first coat, mixed with water proofing compound as per manufacturer instructions, finished fair and even without using extra cement all, including taking down existing plaster, complete all as specified and as directed.

Supply only Integral water proofing compound, complete all as specified and as directed.

M&L for rendering 10mm thick plastering in CM (1:6) finished fair and even without using extra cement including taking down existing plaster, complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 as in soffits of ceiling and RCC Chajja / Facia roof projections including taking down existing plaster, complete all as specified and as directed.

M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation, complete all as specified and as directed.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and wall applying one coat of distemper, complete all as specified and as directed.

Complete removal of old treatment on internal surfaces of wall by scrapping, and washing etc, complete all as specified and as directed.

M&L for applying 1 mm Avg thick wall care putty on wall on internal old / new wall surfaces as per manufacturerer instruction, complete all as specified and as directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall, complete all as specified and as directed.

M&L Two coats of exterior emulsion paint ( Apex ultima or weather coat) including 1 mm thick putty with primer, white or tinted on old/New surfaces of walls including prepration of old/New surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes , complete all as specified and as directed.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm, complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. Note :- Pillar tape shall be measured as supply only under respective item.

Supply only 15 mm dia bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete but fency type, complete all as specified and as directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc & making good to floor, complete all as specified and as directed.

S & F in repair 10 Ltr capacity (ISI Mark), PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe, complete all as specified and as directed.

Supply only PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends, complete all as specified and as directed.

S & F in repair brass chromium plated angle cock 15 mm bore screwed for iron pipe or brass ferrule, complete all as specified and as directed.

S & F in repair over head shower with arm & flange of chromium plated with or without swivel joints, any size, including fixing to 15mm bore steel pipe for required length or union, complete all as specified and as directed.

S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed and fixed, complete all as specified and as directed.

S&F in repair 15mm bore Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F in repair CP Grating Doom 100 mm dia, complete all as specified and as directed.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall, complete all as specified and as directed.

S&F in repair harrison rail / curtain rod, stainless steel with fixing bracket, stops and complete fitment, complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets of any thickness, including cover fillets, complete all as specified and as directed.

M&L 600 x 600 x 4mm thick HPSC oceanic pre primed self embossed textured designer board water , termite and fire resistant as in ceiling or wall panelling fixed with screws as per manufracture instructions, complete all as specified and as directed.

S&F 605 X 605mm Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed.

S & F in repair Gun-metal, globe of gate valve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc, complete all as specified and as directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement, complete all as specified and as directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches, complete all as specified and as directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches, complete all as specified and as directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F in repair 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed, complete all as specified and as directed.

S & F in repair 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed, complete all as specified and as directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints fixed, complete all as specified and as directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints fixed, complete all as specified and as directed.

S & F in repair 110 mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints fixed, complete all as specified and as directed.

S & F in repair 75mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints fixed, complete all as specified and as directed.

S & F in repair 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed, complete all as specified and as directed.

M&L for RCC 1:2:4 type B1(20mmgraded aggregate) as in coloumn, pillar, pier, post, footing, beam including demolition of Existing RCC structure of any thickness, complete all as specified and as directed.

Use and waste of Formwork to sides of Pillar, post ,sturt, piers ,coloumns finished surfases fair, complete all as specified and as directed.

S & F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, benty shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild stee wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.

M&L Supplying and laying 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches, including demoletion of existing pipe, complete all as specified and as directed.

Description same as per Item No. 100.00 above but 20 mm bore, complete all as specified and as directed.

S & F in repair of CPVC brass elbow (3/4" X ½") for 20 mm outer dia CPVC pipe, complete all as specified and as directed.

S & F in repair of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 20 mm outer dia pipe, complete all as specified and as directed.

S & F in repair of CPVC Tank Adaptor for 20 mm outer dia pipe, complete all as specified and as directed.

S & F in repair of CPVC union for 20 mm outer dia pipe, complete all as specified and as directed.

S & F in repair of CPVC Ball Valve for 20 mm outer dia pipe, complete all as specified and as directed.

M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat, complete all as specified and as directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (incl steel sheeting or other covering, also fastening and fixing, complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and as directed.

M &L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified including dismantling of existing AC corrugated sheet, complete all as specified and as directed.

M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 CM width or grith and apply one coat of synthetic enamel, complete all as specified and as directed.

M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :- (a) Provide PCC 1:1.5:3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm on complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolation of old sunken complete all as specified and as directed. (d) Applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note:- Floor Area shall be measured for payment.

Taking down Aluminium door shutters exc 1 sqm and n exc 2 Sqm each and refixing in same opening after resetting, resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc, complete all as specified and as directed.

S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lapping bending for 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc, complete all as specified and as directed.

Jamna Constructions

M/S Ashish Construction