CA NO CWE/PAT/T-27/2020-21 SPECIAL REPAIR TO BLDG NO P-34/1 TO P-34/6(OR MD ACCN) UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projection etc with mechanical means/grinder complete all as specified and directed.

Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

S&F factory made flush shutters 35mm thick, confoirming to IS : 2202 (part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters compete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and including painting with one coat of pink primer and two coats of synthetic enamel paint and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate - 1 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC celuka Board wooden finish pre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Make : Aluminium Section) : Jindal / Valco / Galco / Hindalco or equivalent as approved by AO.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf. Make : Aluminium Section) : Jindal / Valco / Galco / Hindalco or equivalent as approved by AO.

S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified. Make : Aluminium Section) : Jindal / Valco / Galco / Hindalco or equivalent as approved by AO.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

M&L for single charge, vitrified, stainfree & scratch resistant, joint free, Premium (1st) quality straight edge coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern as approved, set and jointed over & including 20mm th screed bed in CM 1:4 and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make - Johnson / Kajaria / Somany / NITCO as approved by AO.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150mm in any pattern of light and dark, as approved to match the floor tiles, set and jointed over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make - Johnson / Kajaria / Somany / NITCO as approved by AO. .

M&L for Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering. Make - Johnson / Kajaria / Somany / NITCO as approved by AO.

M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4), over 25 mm thick cement concrete 1:2:4 type B-0 complete all as specified and directed by Engr-in-Charge. Make - Johnson / Kajaria / Somany / NITCO as approved by AO.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified. Make : Prayag (FT-31M) or equivalent as approved by AO.

S&F stainless steel tubing of 25mm dia mild steel chromium plated 1.0mm thickness as in curtain rod complete including S&F 02 nos stainless steel brackets fency type stop etc in repairs all as specified & directed. Note :- For the purpose of measurement and payment running length of curtain rod only shall be considered.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) or equivalent from Parryware.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified. Make : Jaquar (ALD-573) or equivalent from Hindware/Parryware/Cera as approved by AO

S&F PTMT jet spray with 1.5m long flexible tube including making connections and fixed in position complete in all respect as specified. Make : Prayag (Cat No 522) or equivalent as approved by AO.

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450mm long braided holes complete all as specified and directed. Make : Jaguar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag (Naptune Series).

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaguar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag (Naptune Series).

S&F overhead shower 120mm dia with 225-230mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Cat No. - F7020103)/Jaquar/Marc/Prima

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaguar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag (Naptune Series).

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified. Make : Prayag (BEA-30) or equivalent as approved.

Disconnecting existing tanks of capacity exc 250 and not exc 500 litres, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, ceilings and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including cutting grooves in brick /concrete wall and preparation of surfaces to receive finishes complete all as specified and directed.

S&F 18 mm thick min density 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and slovent cement/ adhesive to ake wall mount kitchen cabinet back and pull out drawers side complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 6 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and slovent cement/ adhesive to ake wall mount kitchen cabinet back and pull out drawers side complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F Piano Hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F stainless steel sink without drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 610mm x510x203mm with bowl size 560x405x203mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Prayag / Neelkanth / Nirali / Diamond

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified. Make : Sika/STP?Fosroc or equivalent as approved by AO.

S&F Stainless Steel plate rack, glossy finish for kitchen over all size 600 mm x600 mm x 250 mm complete fixed in position as recommended by manufacturer with SS Screws / Fastners etc all as directed. Make : Vidhi or equivalent as approved by AO

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

M & L for dummy joints/construction joints 8mm x 10mm as in PCC floors filled with polyurethane elastic adhesive/sealant (white/grey colour) of approx density 1.3 kg/litre complete all as specified.

S&F auto closing hinges 35mm of 0 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified

S&F Ball bearing runners 45 mm Telescoping (KTS-20) full extension load capacity 50 kgs complete in all respect all as specified. Make : KAFF/Hettich

S&F stainless steel 304 grade wire basket (avg weight 2.5 to 4 kg per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/ 2-3 shelf basket etc for kitchen of required size complete in all respect all as specified. Make : Hettich/Godrej/KAFF/Harrison

S&F for tube light fittings, LED type retrofit T-8 20 Watt 4 feet long incl LED tube rod and incl 3 core flexible wire 0.5 Sqmm copper cable all as specified & directed, Make- Philips/Havells/CG

S & F tube light fitting LED type integrated 9/10 watt, 2 ft long including LED tube rod and including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S&F bulk head fitting LED type Including 1 x 9/10 watt LED lamp, with flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S&F LED lamp 7W B-22 all as per complete. Make : Havells / CG/Bajaj /Wipro.

Hanging only ceiling fan after necessary point wiring complete all as specified and directed.

S&F LED security light fitting 30-35 watt, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix bell ding dong electronic complete all as specified and directed.

S&F electric meter digital type single phase complete all as specified and directed. Note : - Old deposited in MES Yard.

Buttar Construction Co.

M/S Mukesh Kumar Gupta

Norton Builders

m/s panchmukhi builders

M/s Anil Kumar and co.

FAVOURITE ENGINEERS